SIP 05719 User manual

WELDING TROLLEY MANUAL
05719
Please read this manual before using

1. Product Descripon
The welding trolley accommodates a welder, accessories & gas cylinder.
Equipped with two wheels, it is very easy to move the welder and large gas bole.
It is an ideal piece of equipment to use in garage, engineering & agricultural workshops.
2. Product Specicaon
Model Dimensions
D x W x H (mm)
Packing Dimensions
L x W x H (mm)
Weight
(kg / lbs)
Load Capacity
(Kg / lbs)
05719 550 x 490 x 1140 600 x 540 x 1190 16 / 35 99 / 218
3. Warning
1. Always use the trolley on a level surface. Compressed gas cylinders are dangerous
should they fall.
2. Never posion the trolley on an inclined surface. It may p over, causing damage and
possible injury.
3. Before using, make sure all fasteners are ght and cart is assembled as per the provid-
ed instrucon
1140m
490mm
550mm
370mm
200mm

4.Assembly
Contents:-
4. Keep instrucons safe for reference.
5. Always move the trolley by using the trolley handle. Never pull the trolley by the
welder, welding torch , leads etc as this may cause the trolley to p over.
6. Do not remove parts from the trolley whilst it is being moved.
7. Always chain the compressed gas cylinder securely with the chains provided.
8. Never weld on the compressed gas cylinder or this cart.
9. Failure to follow these warnings may result in property damage, personal or fatal
injury

5. Fing the wheels:
Lay trolley frame down with the handle poinng up.
Fit the axle through the chassis. Figs 1 & 2
Contents cont….
1 x Trolley Frame 2 x Wheels
1 x Wheel Axle 4 x Wheel Washers
2 x Split Pin 2 x Bole Chain
1 x Strap c/w Clips
Fig.2
Fig.1

Repeat for the other side of the axle.
6. Fing the retaining strap:
Follow steps in Figs 7, 8, 9, 10, 11, 12 & 13:
Fig.5 Fig.6
Fig.3 Fig.4
Fit Washers, Wheel & split pin. Figs 3, 4, 5 & 6:-

Fig.9 Fig.10
Fig.11 Fig.12
Fig.7 Fig.8

6. Fing the chain:
Fit the chain as shown in Figs 14 & 15:
Adjust to suit your bole size.
Fig.14 Fig.15
Fig.13

SIP Industrial Products Limited
Gelders Hall Road
Shepshed
Loughborough
Leicestershire
LE12 9NH
United Kingdom
FOR HELP OR ADVICE ON THIS
PRODUCT PLEASE CONTACT
YOUR DISTRIBUTOR, OR SIP DI-
RECTLY ON:
TEL: [phone]
EMAIL: [e-mail] or
[e-mail]
www.sip-group.com
Please dispose of packaging for the product in a responsible manner. It is suitable for recycling.
Help to protect the environment, take the packaging to the local amenity p and place into the
appropriate recycling bin.
Never dispose of electrical equipment or baeries in with your domesc waste. If your supplier
oers a disposal facility please use it or alternavely use a recognised recycling agent. This will al-
low the recycling of raw materials and help protect the environment.