Fervi 0725 Operating instructions

USE AND
MAINTENANCE MANUAL
Blow gun
Art. 0725
TRANSLATION OF THE ORIGINAL INSTRUCTIONS
fervi.com

HARDWARE
Page
2
of
6
PREFACE
Please ensure you have read this manual before operation
TRANSLATION OF THE ORIGINAL INSTRUCTIONS
Before starting any operation it is compulsory
to read this instruction manual. The guarantee
of smooth operation and full performance of the machine is highly dependent on the
application of all the instructions contained in this manual.
Operator qualifications
The workers responsible for usin
g this tool must have all the necessary information,
education and receive adequate training regarding safety, including:
a)
Conditions of use for the equipment;
b)
Foreseeable abnormal situations, pursuant to Article 73 of Legislative Decree
81/08.
We guaran
tee the product's conformity to specifications and technical instructions
described in the Manual on the date of issue, listed on this page; however, the
machine may be subject to potentially major technical changes in the future, without
the Manual being
updated.
Therefore, contact FERVI for information about modifications that may have been
implemented.
REV. 2
October 2013
fervi.com

HARDWARE
Page
3
of
6
Table of Contents
1
GENERAL SAFETY INSTR
UCTIONS
................................
.............................
4
1.1
Commissioning
................................
................................
................................
..............
4
1.2
Operating the gun
................................
................................
................................
.........
4
1.3
Personal Protective Equipment
................................
................................
.....................
4
1.4
Technical assistance
................................
................................
................................
.....
4
2
DESCRIPTION AND INTE
NDED USE
................................
...........................
5
2.1
Tec
hnical Specifications
................................
................................
................................
6
2.2
Identification
................................
................................
................................
................
6
3
IMPROPER USE AND CON
TRAINDICATIONS
................................
..............
6
4
MAINTENANCE AND CLEA
NING
................................
................................
.
6
fervi.com

HARDWARE
Page
4
of
6
1
GENERAL SAFETY INSTR
UCTIONS
1.1
Commissioning
Before using this blow gun, some simple assembly is required.
To properly assemble the blow gun, proceed as follows:
1.
Screw th
e compressed air coupling onto the gun;
2.
Connect the compressor
1.2
Operating the gun
To blow just squeeze the trigger on the gun, when the trigger is released the air jet stops
instantly.
The greater the pressure on the trigger, the greater the flow of air
released from the gun.
Do not point the jet of air at people or animals.
1.3
Personal Protective Equipment
Errore. Il segnalibro non è definito.
When using the blow gun always wear safety glasses.
Figure
1
-
Safety glasses
1.4
Technical assistance
Errore. Il segnalibro non è definito.
For any problems and/or concerns please contact the
Errore. Il segnalibro non è
definito.
dealer from whom you purchased the blow gun, who can order spare parts if
required.
fervi.com

HARDWARE
Page
5
of
6
2
DESCRIPTION AND INTE
NDED USE
ERRORE. IL
SEGNALIBRO NON È DEF
INITO.
The blow gun
Art. 0725
can be used to remove dirt, dust, water, etc. using a high pressure
air jet that is released from the gun's nozzle.
Figure
2
–
General view.
1
Air output nozzle
2
Trigger
3
Air connector
1
2
3
fervi.com

HARDWARE
Page
6
of
6
2.1
Technical Specifications
Model
Art. 0725
Mass (g)
146
Air coupling (in)
1/4
Maximum pressure (MPa)
1.2
Accessories
Air connector
2.2
Identification
The following identification plate is located on the blow gun,
Art. 0725
Figure
3
–
Identification plate
3
IMPROPER USE AND CON
TRAINDICATIONS
IT IS STRICTLY FORBIDDEN:

To use the blow gun for purposes other than those for which it was intended.

To lock the power lever in the open position.

To use the blow gu
n without the proper use of appropriate PPE

To point the blow gun jet at people and/or animals.
4
MAINTENANCE
ERRORE.
IL SEGNALIBRO NON È
DEFINITO.
AND CLEANING
ERRORE. IL SEGNALIBR
O
NON È DEFINITO.
The compressed air connection must be kept clean and dry.
Contact the Dealer's Customer Service Centre wh
ere you purchased the items to order spare
parts.
fervi.com