3D Extension Unit
Instruction Manual
KONDO KAGAKU CO., LTD. www.kopropo.co.jp
Parts List : 3D Extension Unit ------------------------------------- x1
Stand Extension -------------------------------------- x1
Wheel Cap Remover ---------------------------------- x1
Please read the manual carefully before using this product.
About this manual
Introduction
KO PROPO introduces Kustomize It Yourself
(K.I.Y.) an interchangeable transmitter. The
concept of the new K.I.Y. brings simplicity to
customizing and upgrading within a modular
system. The new transmitter is composed of 3
modular units: Steering, Throttle and Master
units.
K.I.Y. CONCEPT
ET1
ET3ET2
BT1
The names of the buttons
Stronger : Clockwise
Weaker : Counter Clockwise
1.5mm allen wrench
Adjustment of the steering tension
Operating Instructions
Installation *Example with EX-1
Attach to the master unit
stand bottom part
self tapping
screw
EX-1
1. Remove the stand bottom part.
1. Attach the stand extension to the grip unit.
stand extension
self tapping
screw
2. Attach the stand extension to the bottom of stand.
steering unit
2. R e m o ve t h e s t e e r i n g u n i t
from the master unit.
3D extension unit
3. Attach the 3D extension unit
to the master unit.
Turn on the transmitter and do Adjust VR (ST).
Adjust VR (ST)
Please do not forget to perform this function or
the steering may not operate correctly.
