Kobalt CID120KU User manual

1
KOBALT® and the K Design® are registered
trademarks of LF, LLC. All Rights Reserved.
Questions, problems, missing parts? Before returning to your retailer, call our customer
service department at 1-888-3KOBALT (1-888-356-2258), 8 a.m. - 8 p.m., EST,
Monday - Friday.
ATTACH YOUR RECEIPT HERE
Serial Number Purchase Date
AB13595B
Español p. 27
Français p. 14
MODEL #CID120KU
12 V IMPACT
DRIVER
ITEM #0233384

2
kobalttools.com
TABLE OF CONTENTS
PRODUCT SPECIFICATIONS
3URGXFW6SHFL¿FDWLRQV......................................................................................................... 2
Package Contents ............................................................................................................... 3
Safety Information ............................................................................................................... 4
Operating Instructions ......................................................................................................... 8
Care and Maintenance ..................................................................................................... 12
Troubleshooting................................................................................................................ 12
Warranty ........................................................................................................................... 13
Replacement Parts List .................................................................................................... 13
COMPONENT SPECIFICATIONS
Charger Voltage 120 V ~ 60 Hz
Rated Voltage 12 V
No Load Speed 0-2,400/min.
Impact Rate 0-3,000 bpm
Max Torque 800 in.-lbs.
Chuck Size 1/4 in. (6.35 mm)
Charging Time 35 min.
Machine Weight 2.48 lbs.

3
kobalttools.com
PACKAGE CONTENTS
PART DESCRIPTION
A Collet Locking Sleeve
B LED Light
C On/Off Switch
D Battery Pack
E Battery Release Button
F Forward/Reverse Rotation Control
PART DESCRIPTION
G Fuel Gauge
H Soft Grip Handle
I Belt Clip
J Slotted Screwdriving Bit
K #2 Phillips Screwdriving Bit
L Charger
A
B
C
D
E
F
G
H
I
J
K
L

4
kobalttools.com
Please read and understand this entire manual before attempting to assemble, operate or install
the product. If you have any questions regarding the product, please call customer service at
1-888-3KOBALT (1-888-356-2258), 8 a.m. - 8 p.m., EST, Monday - Friday.
This instruction manual contains important information necessary for the proper assembly and safe use
of this tool. Read and follow all warnings and instructions before assembling and using this tool.
CALIFORNIA PROPOSITION 65
6RPHGXVWFUHDWHGE\SRZHUVDQGLQJVDZLQJJULQGLQJGULOOLQJDQGRWKHUFRQVWUXFWLRQDFWLYLWLHV
contains chemicals known to the state of California to cause cancer, birth defects or other
reproductive harm.
$OLVWLQJRIWKHVHFKHPLFDOVFDQEHREWDLQHGIURPZZZRHKKDFDJRY
6RPHH[DPSOHVRIWKHVHFKHPLFDOVDUHOHDGIURPOHDGEDVHGSDLQWVFU\VWDOOLQHVLOLFDIURPEULFNV
and cement and other masonry products, and arsenic and chromium from chemically treated
lumber.
<RXUULVNIURPWKHVHH[SRVXUHVYDULHVGHSHQGLQJRQKRZRIWHQ\RXGRWKLVW\SHRIZRUN7RUHGXFH
your exposure to these chemicals: work in a well-ventilated area, and work with approved safety
HTXLSPHQWVXFKDVDUHVSLUDWRURUGXVWPDVNVSHFLDOO\GHVLJQHGWR¿OWHURXWPLFURVFRSLFSDUWLFOHV
GENERAL POWER TOOL SAFETY WARNINGS
Read all safety warnings and instructions. Failure to follow the warnings and instructions may result in
HOHFWULFVKRFN¿UHDQGRUVHULRXVLQMXU\
The term power tool in the warnings refers to your electric (corded) power tool or battery operated
(cordless) power tool.
Save all warnings and instructions for future reference.
WORK AREA SAFETY
Keep work area clean and well lit.
&OXWWHUHGRUGDUNDUHDVLQYLWHDFFLGHQWV
DO NOTRSHUDWHSRZHUWRROVLQH[SORVLYHDWPRVSKHUHVVXFKDVLQWKHSUHVHQFHRIÀDPPDEOH
liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
.HHSFKLOGUHQDQGE\VWDQGHUVDZD\ZKLOHRSHUDWLQJDSRZHUWRRO'LVWUDFWLRQVFDQFDXVH\RXWRORVH
control.
SAFETY INFORMATION

5
kobalttools.com
SAFETY INFORMATION
ELECTRICAL SAFETY
Power tool plugs MUST match the outlet. NEVER modify the plug in any way. DO NOT use any
DGDSWHUSOXJVZLWKJURXQGHGSRZHUWRROV8QPRGL¿HGSOXJVDQGPDWFKLQJRXWOHWVZLOOUHGXFHULVNRI
electric shock.
$YRLGERG\FRQWDFWZLWKJURXQGHGVXUIDFHVVXFKDVSLSHVUDGLDWRUVUDQJHVDQGUHIULJHUDWRUV7KHUH
is an increased risk of electric shock if your body is grounded.
DO NOT expose power tools to rain or wet conditions. Water entering a power tool will increase the
risk of electric shock.
DO NOT abuse the cord. NEVER use the cord for carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase
the risk of electric shock.
:KHQRSHUDWLQJDSRZHUWRRORXWGRRUVXVHDQH[WHQVLRQFRUGVXLWDEOHIRURXWGRRUXVH8VHRID
cord suitable for outdoor use reduces the risk of electric shock.
,IRSHUDWLQJDSRZHUWRROLQDGDPSORFDWLRQLVXQDYRLGDEOHXVHD*URXQG)DXOW&LUFXLW,QWHUUXSWHU
(GFCI) protected supply. Use of a GFCI reduces the risk of electric shock.
PERSONAL SAFETY
Stay alert, watch what you are doing and use common sense when operating a power tool.
DO NOTXVHDSRZHUWRROZKLOH\RXDUHWLUHGRUXQGHUWKHLQÀXHQFHRIGUXJVDOFRKRORUPHGLFDWLRQ
$PRPHQWRILQDWWHQWLRQZKLOHRSHUDWLQJSRZHUWRROVPD\UHVXOWLQVHULRXVSHUVRQDOLQMXU\
8VHSHUVRQDOSURWHFWLYHHTXLSPHQWALWAYS wear eye protection. Protective equipment such as
dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions
ZLOOUHGXFHSHUVRQDOLQMXULHV
3UHYHQWXQLQWHQWLRQDOVWDUWLQJ(QVXUHWKHVZLWFKLVLQWKHRIISRVLWLRQEHIRUHFRQQHFWLQJWRSRZHU
VRXUFHDQGRUEDWWHU\SDFNSLFNLQJXSRUFDUU\LQJWKHWRRO&DUU\LQJSRZHUWRROVZLWK\RXU¿QJHURQ
the switch or energizing power tools that have the switch on invites accidents.
5HPRYHDQ\DGMXVWLQJNH\RUZUHQFKEHIRUHWXUQLQJWKHSRZHUWRRORQ$ZUHQFKRUDNH\OHIW
DWWDFKHGWRDURWDWLQJSDUWRIWKHSRZHUWRROPD\UHVXOWLQSHUVRQDOLQMXU\
DO NOT overreach. Keep proper footing and balance at all times. This enables better control of the
power tool in unexpected situations.
'UHVVSURSHUO\DO NOTZHDUORRVHFORWKLQJRUMHZHOU\.HHS\RXUKDLUFORWKLQJDQGJORYHVDZD\
IURPPRYLQJSDUWV/RRVHFORWKHVMHZHOU\RUORQJKDLUFDQEHFDXJKWLQPRYLQJSDUWV
,IGHYLFHVDUHSURYLGHGIRUWKHFRQQHFWLRQRIGXVWH[WUDFWLRQDQGFROOHFWLRQIDFLOLWLHVHQVXUHWKHVH
are connected and properly used. Use of dust collection can reduce dust-related hazards.

6
kobalttools.com
POWER TOOL USE AND CARE
DO NOT force the power tool. Use the correct power tool for your application. The correct power tool
ZLOOGRWKHMREEHWWHUDQGVDIHUDWWKHUDWHIRUZKLFKLWZDVGHVLJQHG
DO NOT use the power tool if the switch does not turn it on and off. Any power tool that cannot be
controlled with the switch is dangerous and must be repaired.
'LVFRQQHFWWKHSOXJIURPWKHSRZHUVRXUFHDQGRUWKHEDWWHU\SDFNIURPWKHSRZHUWRROEHIRUH
PDNLQJDQ\DGMXVWPHQWVFKDQJLQJDFFHVVRULHVRUVWRULQJSRZHUWRROV6XFKSUHYHQWLYHVDIHW\
measures reduce the risk of starting the power tool accidentally.
6WRUHLGOHSRZHUWRROVRXWRIWKHUHDFKRIFKLOGUHQDQGGRQRWDOORZSHUVRQVXQIDPLOLDUZLWKWKH
power tool or these instructions to operate the power tool. Power tools are dangerous in the hands
of untrained users.
0DLQWDLQSRZHUWRROV&KHFNIRUPLVDOLJQPHQWRUELQGLQJRIPRYLQJSDUWVEUHDNDJHRISDUWVDQGDQ\
other condition that may affect the power tool's operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly maintained power tools.
.HHSFXWWLQJWRROVVKDUSDQGFOHDQ3URSHUO\PDLQWDLQHGFXWWLQJWRROVZLWKVKDUSFXWWLQJHGJHVDUH
less likely to bind and are easier to control.
8VHWKHSRZHUWRRODFFHVVRULHVDQGWRROELWVHWFLQDFFRUGDQFHZLWKWKHVHLQVWUXFWLRQVDQGLQWKH
manner intended for the particular type of power tool, taking into account the working conditions and
the work to be performed. Use of the power tool for operations different from those intended could
result in a hazardous situation.
BATTERY TOOL USE AND CARE
5HFKDUJHRQO\ZLWKWKHFKDUJHUVSHFL¿HGE\WKHPDQXIDFWXUHU$FKDUJHUWKDWLVVXLWDEOHIRURQHW\SH
RIEDWWHU\SDFNPD\FUHDWHDULVNRI¿UHZKHQXVHGZLWKDQRWKHUEDWWHU\SDFN
8VHSRZHUWRROVRQO\ZLWKVSHFL¿FDOO\GHVLJQDWHGEDWWHU\SDFNV8VHRIDQ\RWKHUEDWWHU\SDFNVPD\
FUHDWHDULVNRILQMXU\DQG¿UH
:KHQEDWWHU\SDFNLVQRWLQXVHNHHSLWDZD\IURPRWKHUPHWDOREMHFWVOLNHSDSHUFOLSVFRLQVNH\V
QDLOVVFUHZVRURWKHUVPDOOPHWDOREMHFWVWKDWFDQPDNHDFRQQHFWLRQIURPRQHWHUPLQDOWRDQRWKHU
6KRUWLQJWKHEDWWHU\WHUPLQDOVWRJHWKHUPD\FDXVHEXUQVRUD¿UH
8QGHUDEXVLYHFRQGLWLRQVOLTXLGPD\EHHMHFWHGIURPWKHEDWWHU\DYRLGFRQWDFW,IFRQWDFW
DFFLGHQWDOO\RFFXUVÀXVKZLWKZDWHU,IOLTXLGFRQWDFWVH\HVDGGLWLRQDOO\VHHNPHGLFDOKHOS/LTXLG
HMHFWHGIURPWKHEDWWHU\PD\FDXVHLUULWDWLRQRUEXUQV
SERVICE
+DYH\RXUSRZHUWRROVHUYLFHGE\DTXDOL¿HGUHSDLUSHUVRQXVLQJRQO\LGHQWLFDOUHSODFHPHQWSDUWV
This will ensure that the safety of the power tool is maintained.
DRILL SAFETY WARNINGS
Hold power tool by insulated gripping surfaces when performing an operation where the cutting ac-
cessory may contact hidden wiring. Cutting accessory contacting a “live” wire may make exposed
metal parts of the power tool “live” and could give the operator an electric shock.
GENERAL SAFETY WARNINGS FOR BATTERY PACK
SAFETY INFORMATION

7
kobalttools.com
WARNING:
5LVNRI¿UHDQGEXUQVDO NOT disassemble, heat above 100°C (212°F), or incinerate.
DO NOTH[SRVHFHOOVRUEDWWHULHVWRKHDWRU¿UH$YRLGVWRUDJHLQGLUHFWVXQOLJKW
'LVSRVHRIXVHGEDWWHU\SURPSWO\DO NOTGLVSRVHRILQ¿UH
.HHSEDWWHU\RXWRIUHDFKRIFKLOGUHQDQGLQRULJLQDOSDFNDJHXQWLOUHDG\WRXVH
NEVER put batteries in mouth. If swallowed, contact your physician or local poison control center.
CAUTION
7KHEDWWHU\XVHGLQWKLVGHYLFHPD\SUHVHQWDULVNRI¿UHRUFKHPLFDOEXUQLIPLVWUHDWHG5HSODFH
EDWWHU\ZLWKVDPH.REDOW9EDWWHU\RQO\8VHRIDQRWKHUEDWWHU\PD\SUHVHQWDULVNRI¿UHRU
explosion.
'2127 use a visibly damaged battery pack or appliance as applicable.
DO NOT modify or attempt to repair the appliance or the battery pack as applicable.
%DWWHU\MUST be recycled.
5HFKDUJHRQO\ZLWKWKHFKDUJHUVSHFL¿HGE\WKHPDQXIDFWXUHU$FKDUJHUWKDWLVVXLWDEOHIRURQHW\SH
RIEDWWHU\SDFNPD\FUHDWHDULVNRI¿UHZKHQXVHGZLWKDQRWKHUEDWWHU\SDFN
DO NOT short-circuit a cell or battery. Do not store cells or batteries haphazardly in a box or drawer
where they may short-circuit each other or be short-circuited by conductive materials.
DO NOTVXEMHFWFHOOVRUEDWWHULHVWRPHFKDQLFDOVKRFN
.HHSFHOOVDQGEDWWHULHVFOHDQDQGGU\:LSHWKHFHOORUEDWWHU\WHUPLQDOVZLWKDFOHDQGU\FORWKLI
they become dirty.
6HFRQGDU\FHOOVDQGEDWWHULHVQHHGWREHFKDUJHGEHIRUHXVH$OZD\VUHIHUWRWKHFHOORUEDWWHU\
manufacturer’s instructions and use the correct charging procedure.
DO NOT maintain secondary cells and batteries on charge when not in use.
5HWDLQWKHRULJLQDOFHOODQGEDWWHU\OLWHUDWXUHIRUIXWXUHUHIHUHQFH
:KHQGLVSRVLQJRIVHFRQGDU\FHOOVRUEDWWHULHVNHHSFHOOVRUEDWWHULHVRIGLIIHUHQWHOHFWURFKHPLFDO
systems separate from each other.
8VHRQO\WKHFHOORUEDWWHU\LQWKHDSSOLFDWLRQIRUZKLFKLWZDVLQWHQGHG
KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
SAFETY INFORMATION

8
kobalttools.com
2. After recharge, slide the battery pack (D) into
the battery port. A simple push and slight
SUHVVXUHZLOOEHVXI¿FLHQW
2
D
USING YOUR BATTERY PACK
Note: Before using the tool, read the instruction book carefully.
WARNING: 7KHFKDUJHUDQGEDWWHU\SDFNDUHVSHFL¿FDOO\GHVLJQHGWRZRUNWRJHWKHUVRDO
NOT attempt to use any other devices. NEVERLQVHUWRUDOORZPHWDOOLFREMHFWVLQWR\RXUFKDUJHURU
battery pack connections because an electrical failure and hazard will occur.
<RXUEDWWHU\SDFNLVUNCHARGED and you must charge once before use. When you charge the
new battery or one which has not been used for long periods of time, it may not reach full charge
until after you have discharged it fully in use and recharged it several times.
OPERATING INSTRUCTIONS
1. Plug the charger (L) into an appropriate outlet.
The light will be green. Insert the battery pack
'LQWRWKHFKDUJHU7KHOLJKWZLOOÀDVKUHGWR
indicate the charging process has started. On
completion of charge, the light will turn solid
green. The pack is now fully charged. Unplug
the charger and remove the battery pack.
WARNING
When battery charge runs out after continuous
use or exposure to direct sunlight or heat,
allow time for the battery to cool down before
recharging to achieve the full charge.
1
L
D

9
kobalttools.com
3. To remove the battery pack (D), depress battery
release button (E) and remove the battery pack
from your tool.
3
1
E
D
OPERATING INSTRUCTIONS
<RXUWRROLVHTXLSSHGZLWKDIXHOJDXJH*
Press the On/Off switch fully and the fuel gauge
will light up for 2-3 seconds to show the amount
of charge left in the battery.
4
G
FUEL GAUGE CAPACITY
3 Green Lights >2/3
2 Green Lights >1/3
1 Green Light <1/3
1 Flashing Light Reserve

10
kobalttools.com
DRIVER FEATURES
1. Depress the On/Off switch (C) to start and
release it to stop your driver. The LED light (B)
will turn on when you press the On/Off switch
&7KH2Q2IIVZLWFKLV¿WWHGZLWKDEUDNH
function which stops your chuck immediately
when you quickly release the switch. It is also a
variable speed switch that delivers higher speed
and torque with increased trigger pressure.
Speed is controlled by the amount of switch
trigger depression.
WARNING
DO NOT operate for long periods at low speed
because excess heat will be produced internally.
2. The On/Off switch (C) can be locked in the OFF
position. This helps to reduce the possibility of
accidental starting when not in use. To lock the
On/Off switch, place the forward/reverse rotation
control (F) in the center position.
For drilling and screw driving, use forward
rotation marked “>>” (forward/reverse rotation
control is moved to the left). Only use reverse
rotation marked “<<” (forward/reverse rotation
control is moved to the right) to remove screws
RUUHOHDVHDMDPPHGGULOOELW
WARNING
NEVER change the direction of rotation when
the chuck is rotating. Wait until it has stopped!
BELT CLIP
1. The belt clip is attached with a small screw.
Simply unscrew the clip to move it to the opposite
side of the drill.
OPERATING INSTRUCTIONS
1
C
B
2
Clockwise CounterclockwiseLocked
F
1
I

11
kobalttools.com
3. To install the desired bit, pull the collet locking
sleeve (A) forward and insert the desired bit into
the sleeve as far as it will go. Then release the
collet locking sleeve to secure the bit. To remove
the bit, pull the collet locking sleeve forward and
WDNHWKHELWRXW¿UPO\
OPERATING INSTRUCTIONS
3
2
1
K
A
BATTERY DISPOSAL
To preserve natural resources, please recycle or dispose of the battery pack properly. This battery
pack contains lithium batteries. Consult your local waste authority for information regarding available
recycling and/or disposal options. Discharge your battery pack by operating your drill, then remove
the battery pack from the drill housing and cover the battery pack connections with heavy-duty
adhesive tape to prevent short circuit and energy discharge. DO NOT attempt to open or remove any
of the components.

kobalttools.com
12
CARE AND MAINTENANCE
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION
The driver will not turn
on when the On/Off
switch is pressed.
The forward/reverse rotation
control, which is on top of the
trigger, is positioned in the lock
function.
Unlock the forward/reverse rotation
control by putting it into the required
rotation position. Push the On/Off
switch and the driver will start to rotate.
Battery pack does not
hold a charge or needs
to be recharged often.
1. Battery pack has not been
used for a prolonged time.
2. Heavy working conditions
such as driving large screws
into hard wood.
3. Battery pack was charged
below 32°F (0°C) or above
113°F (45°C).
1. This can be corrected after several
charge and discharge operations by
charging & working with your driver.
2. Heavy working conditions will use up
the battery pack energy faster. Make
sure torque setting is correct.
3. The battery pack must be charged
between 32°F (0°C) and 113°F
(45°C) for optimal use.
<RXUSRZHUWRROUHTXLUHVQRDGGLWLRQDOOXEULFDWLRQRUPDLQWHQDQFH7KHUHDUHQRXVHUVHUYLFHDEOH
parts in your power tool. NEVER use water or chemical cleaners to clean your power tool. Wipe clean
with a dry cloth. ALWAYS store your power tool in a dry place. Keep the motor ventilation slots clean.
Keep all working controls free of dust. Occasionally you may see sparks through the ventilation slots.
This is normal and will not damage your power tool.

13
kobalttools.com
KOBALT® and the K Design® are
registered trademarks of LF, LLC. All
Rights Reserved.
Printed in China
WARRANTY
<($5:$55$17<67$7(0(17)25.2%$/79&25'/(66&20%2.,7
,IWKLV.REDOWWRROEHFRPHVGHIHFWLYHGXHWRIDXOW\PDWHULDOVRUZRUNPDQVKLSZLWKLQ¿YH\HDUVIURP
the date of purchase, the manufacturer guarantees to:
5HSODFHRUUHSDLUDOOGHIHFWLYHSDUWVRUSURGXFWVIUHHRIFKDUJHRU
5HSODFHWKHXQLWZLWKDQHZRUUHFRQGLWLRQHGXQLWIUHHRIFKDUJHRU
5HIXQGWKHRULJLQDOSXUFKDVHSULFH
For guarantee claims, simply return the tool along with proof of purchase to the place of purchase, or
contact 1-888-3KOBALT (1-888-2258), 8 a.m. – 8 p.m., EST, Monday – Friday.
<RXUZDUUDQW\LVVXEMHFWWRWKHIROORZLQJFRQGLWLRQV
%DWWHU\SDFNVDUHJXDUDQWHHGIRUDWKUHH\HDUSHULRGRQO\
7KHWRROKDVQRWEHHQPLVXVHGDEXVHGQHJOHFWHGDOWHUHGPRGL¿HGRUUHSDLUHGE\DQ\RQHRWKHU
than an authorized service center.
2QO\SURSHUDFFHVVRULHVDQGSDUWVKDYHEHHQXVHGRQRUZLWKWKHSURGXFW
7KHWRROKDVEHHQVXEMHFWHGWRIDLUZHDUDQGWHDU
7KHWRROKDVQRWEHHQXVHGIRUUHQWDOSXUSRVHV
7KHWRROKDVQRWVXVWDLQHGGDPDJHWKURXJKIRUHLJQREMHFWVVXEVWDQFHVRUDFFLGHQWV
6DOHVUHFHLSWPXVWEHSUHVHQWHGDVSURRIRIRULJLQDOSXUFKDVH
<RXUZDUUDQW\GRHVQRWFRYHU
&RPSRQHQWVWKDWDUHVXEMHFWWRQDWXUDOZHDUDQGWHDUFDXVHGE\XVHLQDFFRUGDQFHZLWKRSHUDWLQJ
instructions.
8QDXWKRUL]HGLPSURSHUPDLQWHQDQFHKDQGOLQJRURYHUORDGLVH[FOXGHGIURPWKLVZDUUDQW\DVDUH
accessories such as bulbs, blades and bits, etc.
This guarantee statement does not replace but is in addition to your statutory rights.
This warranty does not apply to accessories supplied with the tool.
This warranty applies only to the original purchaser and may not be transferred.
All repairs and replacement tools will be covered by the limited warranty for the balance of the warranty
period from the date of the original purchase.
REPLACEMENT PARTS LIST
For replacement parts, call our customer service department at 1-888-3KOBALT, 8 a.m. - 8 p.m., EST,
Monday – Friday.
PART DESCRIPTION PART #
112 V Battery 70039758
212 V Battery Charger 70039757
3Belt Hook 70039679
4Bit Holder 70039692
5Screw for Hook & Bit
Holder
70039680