Kodak DX7440 - EASYSHARE Digital Camera User manual

Kodak EasyShare
DX7440 zoom digital camera
User’s guide
www.kodak.com
For interactive tutorials, www.kodak.com/go/howto
For help with your camera, www.kodak.com/go/dx7440support

Eastman Kodak Company
343 State Street
Rochester, New York 14650
© Eastman Kodak Company, 2004
All screen images are simulated.
Kodak and EasyShare are trademarks of Eastman Kodak Company.
P/N 4J1201

Product features
www.kodak.com/go/support i
Top, Front View
1 Wrist strap post 8 Flash unit
2 Zoom (Wide angle/Telephoto);
Magnify (when Reviewing pictures)
9Viewfinder
3 Shutter button 10 Lens
4 Flash Setting button 11 Microphone
5 Close-up/Landscape button 12 Light sensor
6 Exposure Bracketing/Burst button 13 Self Timer/Video light
7 Speaker
4
3
1
6
2
5
10
789
111213

Product features
ii www.kodak.com/go/support
Side, Back View
Bottom View
1 USB Port 10 Jog dial
2 A/V Out, for television viewing 11 Share button
3 DC-In (5V) 12 Mode dial lock
4 Diopter dial 13 Joystick - move
OK - press in
5 Ready light
6 Viewfinder 14 Mode dial
7 Delete button 15 Power ring
8 Menu button 16 Display/Info button
9 Review button 17 Camera screen (LCD)
1 Dock connector
2 Tripod socket/locator for EasyShare camera dock or printer dock
3 Battery door, MMC/SD card slot
3 2
4
7 8 9
14
17
1
13
6
5
10
11
12
1516
2
1
3

www.kodak.com/go/support iii
Table of contents 1
1 Getting started ........................................................................... 1
Package contents.............................................................................. 1
Installing the software first................................................................ 1
Charging the battery ......................................................................... 2
Inserting the battery.......................................................................... 2
Important battery information ........................................................... 3
Turning the camera on and off .......................................................... 4
Setting the date and time.................................................................. 5
Checking camera status in capture mode........................................... 5
Storing pictures on an SD/MMC card ................................................. 6
Using optional lenses ........................................................................ 6
2 Taking pictures and videos ......................................................... 7
Taking a picture ................................................................................ 7
Taking a video .................................................................................. 8
Reviewing the picture or video just taken........................................... 9
Using optical zoom ........................................................................... 9
Using digital zoom .......................................................................... 10
Camera modes................................................................................ 10
Using the flash................................................................................ 15
Shooting close-up and landscape pictures........................................ 17
Using exposure bracketing .............................................................. 18
Using burst ..................................................................................... 19
Changing picture-taking settings ..................................................... 20
Using setup to customize your camera............................................. 24
Pre-tagging for album names .......................................................... 26
3 Reviewing pictures and videos ................................................. 28
Viewing single pictures and videos .................................................. 28
Viewing multiple pictures and videos............................................... 29
Playing a video................................................................................ 29
Deleting pictures and videos............................................................ 30
Magnifying pictures......................................................................... 30
Changing optional review settings................................................... 30
Protecting pictures and videos from deletion.................................... 31
Tagging pictures/videos for albums.................................................. 31
Running a slide show ...................................................................... 32
Displaying pictures and videos on a television.................................. 33
Copying pictures and videos............................................................ 33

iv www.kodak.com/go/support
Viewing picture/video information ................................................... 34
4 Installing the software ............................................................. 35
Minimum system requirements ........................................................ 35
Install the software ......................................................................... 36
5 Sharing pictures and videos ..................................................... 37
When can I tag my pictures and videos?.......................................... 37
Tagging pictures for printing............................................................ 38
Tagging pictures and videos for emailing ......................................... 39
Tagging pictures as favorites ........................................................... 40
6 Transferring and printing pictures ............................................ 42
Transferring pictures/videos with the USB cable ............................... 42
Printing pictures from your computer............................................... 43
Ordering prints online ..................................................................... 43
Printing from an optional SD/MMC card .......................................... 43
Printing without a computer............................................................ 43
7 Troubleshooting ....................................................................... 44
Camera problems............................................................................ 44
Computer/connectivity problems...................................................... 45
Picture quality problems .................................................................. 46
Camera ready light status................................................................ 46
8 Getting help ............................................................................. 48
Helpful links.................................................................................... 48
Telephone customer support ........................................................... 49
9 Appendix .................................................................................. 50
Camera specifications ..................................................................... 50
Tips, safety, maintenance ................................................................ 52
Storage capacities ........................................................................... 53
Power-saving features..................................................................... 54
Upgrading your software and firmware............................................ 55
Regulatory compliance .................................................................... 55

www.kodak.com/go/support 1
1Getting started
Package contents
Not shown: User’s guide (may be provided on a CD), Start Here! guide,
Kodak EasyShare software CD. Contents may change without notice.
Installing the software first
IMPORTANT: Install the software from the Kodak EasyShare software CD before
connecting the camera (or dock) to the computer. Otherwise, the
software may install incorrectly. See the Start Here! guide or
Installing the software, page 35.
1 Camera with wrist strap 4 Audio/Video cable (for viewing pictures
and videos on television)
2 Custom dock insert (for EasyShare
camera dock or printer dock)
5 USB cable
3 Li-Ion rechargeable battery and charger
1
5
2
3
4

Getting started
2 www.kodak.com/go/support
Charging the battery
The Li-Ion rechargeable battery requires charging before first use.
1Insert the battery into the charger.
2Insert the plug that matches your electrical outlet.
3Plug the charger into the outlet.
The indicator light turns red. When the indicator light turns green, remove the
battery and unplug the charger. Charging takes approximately 3 hours.
You can also charge the battery using an optional Kodak EasyShare printer
dock or camera dock. Purchase these and other accessories at a dealer of
Kodak products or visit www.kodak.com/go/accessories.
Inserting the battery
CAUTION:
Use only a Kodak EasyShare Li-Ion rechargeable battery.
1Turn the Mode dial to Off.
2On the bottom of the camera, slide the battery
door and lift to open.
3Insert the battery as shown. Tilt the battery so
the battery lock is pushed to the side. Push the
battery into the battery compartment.
The battery lock holds the battery in place.
4Close the battery door.
1 2 3
Battery
lock

Getting started
www.kodak.com/go/support 3
Important battery information
Kodak battery replacement types/battery life
Actual battery life may vary based on usage.
We recommend using only a Kodak EasyShare Li-Ion rechargeable battery. Not
all manufacturers’ 3.7V Li-Ion rechargeable batteries are compatible with the
camera. Damage caused by unauthorized accessories is not covered under
warranty.
Extending battery life
■Limit the following activities that deplete battery power:
– Reviewing your pictures on the camera screen
– Excessive use of the flash
– Using the camera screen as a viewfinder
■Dirt on the battery contacts can affect battery life. Wipe the contacts with a
clean, dry cloth before inserting a battery in the camera.
■Battery performance is reduced at temperatures below 41° F (5° C).
When using your camera in cold weather, carry spare batteries and keep
them warm. Do not discard cold batteries that do not work; when they
return to room temperature, they may be usable.
Visit www.kodak.com/go/dx7440accessories for:
Kodak EasyShare camera dock—powers your camera, transfers pictures
to your computer, and charges your battery.
Kodak EasyShare printer dock—powers your camera, makes
4 x 6 in. (10 x 15 cm) prints with or without a computer, transfers pictures,
and charges your battery.
Kodak 5-volt AC adapter—powers your camera.
0400
275-325
160-210
Li-Ion rechargeable battery,
Battery Life (Approx. number of pictures)
1700 mAh
Li-Ion rechargeable battery,
1050 mAh (included with camera)

Getting started
4 www.kodak.com/go/support
Battery safety and handling
■Do not allow batteries to touch metal objects, including coins. Otherwise, a
battery may short circuit, discharge energy, become hot, or leak.
■For rechargeable battery disposal information, see the Rechargeable
Battery Recycling Corporation Web site at www.rbrc.com.
For more information on batteries, see
www.kodak.com/global/en/service/batteries/batteryUsage.jhtml
Turning the camera on and off
■While pressing the Mode dial lock, turn the
Mode dial from Off to Auto .
The Power ring glows green. The camera screen
turns on. The Ready light blinks green while the
camera performs a self-check, then turns off
when the camera is ready.
■To turn off the camera, turn the Mode dial to
Off.
Changing the camera screen in Auto mode
Mode dial lock
Ready light
Power ring
If you want Then
To turn the camera screen on
or off
Press the Display/Info button:
■Once to hide the icons.
■Again to turn off the camera screen.
■Again to turn on the camera screen and icons.
The camera screen off when
you turn on the camera in
Auto mode
See Liveview (Auto), page 23.

Getting started
www.kodak.com/go/support 5
Setting the date and time
Setting the date & time, first time
The Date and Time have been reset message appears the first time you turn on
the camera or if the battery is removed for an extended time.
1SET DATE & TIME is highlighted. Press the OK button.
2Go to step 4 in Setting the date & time, anytime.
Setting the date & time, anytime
1Turn on the camera. Press the Menu button.
2Press to highlight Setup Menu , then press the OK button.
3Press to highlight Date & Time , then press the OK button.
4Press to adjust the date and time. Press to advance to the next
setting.
5When finished, press the OK button.
6Press the Menu button to exit the menu.
NOTE: Depending on your computer operating system, Kodak EasyShare software may update the
camera clock when you connect the camera. See EasyShare software Help for details.
Checking camera status in capture mode
The icons that appear on the camera screen indicate the active camera and
picture settings.
Exposure compensation
Camera mode
Battery
Date stamp
Landscape/Close-up
Flash Picture size
Pictures/time remaining
Image storage
ISO
White balance
Zoom:
digital
telephoto
wide
Album name
Exposure
metering
Burst
Compression
Aperture
Shutter speed
Flash compensation
AF mode
Focus zone

Getting started
6 www.kodak.com/go/support
Storing pictures on an SD/MMC card
Your camera has 32 MB of internal memory. You can purchase optional
SD/MMC cards for removable, reusable storage for your pictures and videos.
CAUTION:
The card can only be inserted one way; forcing it may
damage the camera or card. Do not insert or remove a card
when the green ready light is blinking; doing so may
damage your pictures, card, or camera.
1Turn off the camera, then open the card door.
2Orient the card as shown on the camera body.
3Push the card all the way into the slot.
4Close the door.
To remove the card, turn off the camera. Push
the card in, then release it. When the card is
partially ejected, pull it out.
See page 53 for storage capacities. Purchase SD/MMC cards at a dealer of
Kodak products or www.kodak.com/go/dx7440accessories.
NOTE: When using a card for the first time, we suggest you format it before taking pictures. (See
page 26.) We cannot guarantee compatibility with “high-speed” SD cards such as xSD or
Ultra-2; these cards are designed primarily for video or audio.
Using optional lenses
Expand your creativity with a selection of Kodak accessory lenses, offered in
wide angle, telephoto, and close-up. See a dealer of Kodak products or
www.kodak.com/go/dx7440accessories.
Notched
corner

www.kodak.com/go/support 7
2Taking pictures and videos
Taking a picture
1Turn the Mode dial to Auto . (See page 10 for other mode
descriptions.)
The camera screen displays the mode name and description. To interrupt the
description, press any button. To redisplay the description, press the OK button.
2Use the camera screen as a viewfinder, or
press the Display/Info button to turn off the
camera screen and use the viewfinder to
frame your subject.
3Press the Shutter button halfway to set the
exposure and focus.
4When the ready light turns green, continue
pressing the Shutter button completely
down to take the picture.
If the ready light is steady or blinking red, release
your finger, recompose the scene, and return to
Step 3.
When the ready light blinks green, the picture is
being saved; you can still take pictures.
NOTE: If you want the camera screen be off when you turn on the camera, see Liveview (Auto),
page 23.
Using the diopter dial
You can adjust the viewfinder sharpness to your preference.
1Look through the viewfinder.
2Using your left thumb, turn the diopter dial
until the viewfinder image is sharp.
Display/ buttonInfo
Diopter dial

Taking pictures and videos
8 www.kodak.com/go/support
Using the auto-focus framing marks
When using the camera screen as a viewfinder, framing marks indicate where
the camera is focusing. For the best pictures, the camera attempts to focus on
foreground subjects, even if the subjects are not centered in the scene.
1With the camera screen on, press the Shutter
button halfway and hold.
When the framing marks turn green, focus is
accomplished.
2Press the Shutter button the rest of the way down to take the picture.
3If the camera is not focusing on the desired subject (or if the framing marks
disappear and the Ready light blinks red), release your finger, recompose
the scene, and return to Step 2.
NOTE: Framing marks do not appear in Landscape or Video mode.
Taking a video
1Turn the Mode dial to Video .
2Use the viewfinder or camera screen to frame your subject.
3Press the Shutter button completely down and release. To stop recording,
press and release the Shutter button again.
NOTE: If you prefer, press the Shutter button completely down and hold it for more than 2
seconds to begin recording. To stop recording, release the Shutter button.
You can change optical zoom before (but not during) video recording.
While the shutter button is pressed halfway:
Center focus
Center wide focus
Side focus
Center and side focus
Left and right focus
Framing
marks

Taking pictures and videos
www.kodak.com/go/support 9
Reviewing the picture or video just taken
After you take a picture or video, the camera screen displays a Quickview for
approximately 5 seconds. While the picture or video is displayed, you can:
■Review: If you take no action, the
picture/video is saved.
■Play (video): Press the OK button to play the
video. Press to adjust the volume.
■Share: Press the Share button to tag a
picture/video for email or as a favorite, or to
tag a picture for print. (See page 38.)
■Delete: Press the Delete button while the
picture/video and are displayed.
NOTE: Only the final picture of a burst series (see page 19) is
displayed during Quickview. If you select Delete, all
pictures in the burst series are deleted. To delete
selectively, do so in Review. (See page 30.)
Using optical zoom
Use optical zoom to get up to 4X closer to your subject. Optical zoom is
effective when the lens is no closer than 29.5 in. (75 cm) from the subject.
You can change optical zoom before (but not during) video recording.
1Use the viewfinder or camera screen to frame
your subject.
2Pull or push the Zoom button to zoom in (T)
and out (W).
If the camera screen is turned on, the zoom
indicator shows when you are in optical zoom
range or in digital zoom range.
3Press the Shutter button halfway and hold
to set the exposure and focus, then press the
rest of the way down to take the picture.
(When taking videos, press and release the
Shutter button.)
OK
Delete
Share
Zoom indicator
Digital zoom
Optical zoom
range
range

Taking pictures and videos
10 www.kodak.com/go/support
Using digital zoom
Use digital zoom in any still mode to get an additional 4X magnification
beyond optical zoom. Combined zoom settings are from 4.8X to 16X. You
must turn on the camera screen before activating digital zoom.
1Press the Display/Info button to turn on the camera screen.
2Pull the Zoom button to the optical zoom limit (4X). Release the button,
then pull it again.
The camera screen displays the zoomed image and the zoom indicator.
3Press the Shutter button halfway and hold to set the exposure and
focus, then press the rest of the way down to take the picture.
NOTE: You cannot use digital zoom for video recording.
IMPORTANT: You may notice a decrease in printed image quality when using
digital zoom. The blue slider on the zoom indicator pauses, then
turns red when the picture quality is approximately 1 MP. For an
acceptable 4 x 6 in. (10 x 15 cm) print, ensure that the slider
remains blue.
Camera modes
Use this mode For
Auto General picture-taking. Automatically sets exposure, focus, and
flash.
Scene Point-and-shoot simplicity when taking pictures under 16
special conditions. (See Scene modes, page 12.)
Program Controlling exposure compensation (how much light enters the
camera) and flash compensation. The camera automatically
sets the shutter speed and aperture (f-stop) based on the scene
lighting. Program mode offers the ease of auto shooting with
full access to all menu options. Use the jog dial to select
settings. (See P, A, S, M, and C mode, page 13 and Using the
jog dial to change P, A, S, M, or C mode settings, page 14.)
Press the Menu button to change other settings.

Taking pictures and videos
www.kodak.com/go/support 11
Aperture
Priority
Controlling aperture, exposure compensation, flash
compensation, and ISO speed. Aperture priority mode is
primarily used to control depth of field (the range of sharpness).
NOTE: The aperture setting may be affected when using optical
zoom. Use the jog dial to select settings. (See P, A, S, M, and C
mode, page 13 and Using the jog dial to change P, A, S, M, or
C mode settings, page 14.) Press the Menu button to change
other settings.
Shutter
Priority
Controlling the shutter speed, ISO speed, flash compensation,
and exposure compensation. The camera automatically sets the
aperture for proper exposure. Shutter priority mode is primarily
used to prevent blur when your subject is moving. Use the jog
dial to select settings. (See P, A, S, M, and C mode, page 13 and
Using the jog dial to change P, A, S, M, or C mode settings,
page 14.) Press the Menu button to change other settings. To
prevent camera shake, use a tripod for slow shutter speeds.
Manual Enjoying the highest level of creative control. You set the
aperture, shutter speed and ISO speed. Exposure compensation
acts as an exposure meter, recommending the proper
combination of aperture and shutter speed to produce an
acceptable exposure. Use the jog dial to select settings. (See P,
A, S, M, and C mode, page 13 and Using the jog dial to change
P, A, S, M, or C mode settings, page 14.) Press the Menu button
to change other settings. To prevent camera shake, use a tripod
for slow shutter speeds.
Custom The “user-created” mode. For applying P, A, S, & M plus any
Custom settings (exposure compensation, flash compensation,
ISO speed) which are saved independently of other camera
settings. Use the jog dial to select settings. (See P, A, S, M, and
C mode, page 13 and Using the jog dial to change P, A, S, M,
or C mode settings, page 14.) Press the Menu button to choose
a capture mode. (See Custom Exposure Mode, page 20.) Press
the Menu button to change other settings.
Favorites Viewing your favorites. (See page 40.)
Video Capturing video with sound. (See page 8.)
Use this mode For

Taking pictures and videos
12 www.kodak.com/go/support
Scene modes
1Turn the Mode dial to Scene .
2Press to display Scene mode descriptions.
3Press the OK button to choose a Scene mode.
Use this SCN mode For
Portrait Full-frame pictures of people and other subjects.
Sports Subjects that are in motion. Shutter speed is fast.
Landscape Distant scenery. Flash does not fire. Auto-focus framing marks
(page 8) are not available in Landscape.
Close-up Subjects closer than 28 in. (70 cm).
Night
Portrait
Capturing subject and background at night. Place the camera
on a flat, steady surface or use a tripod. Due to slow shutter
speeds, advise people to stay still for a few seconds after flash
fires.
Night
Landscape
Distant scenery at night. Place the camera on a flat, steady
surface or use a tripod.
Snow Bright snow scenes.
Beach Bright beach scenes.
Text Documents, from 3.9 - 23.7 in. (10-60 cm).
Fireworks Fireworks. Place the camera on a flat, steady surface or use a
tripod.
Flower Close-ups of flowers in bright light.
Manner Quiet occasions, like a wedding or lecture. Flash and sound
are disabled.
Self
Portrait
Close-ups of yourself, from 3.9 - 23.7 in. (10-60 cm).
Party People indoors.

Taking pictures and videos
www.kodak.com/go/support 13
P, A, S, M, and C mode
Aperture—also known as f-stop, controls
the size of the lens opening, which determines
the depth of field.
Larger aperture settings (larger f-number)
keep both foreground and background sharp;
good for landscapes and well-lit conditions.
Smaller aperture settings make the
foreground sharp and background blurry;
good for portraits and low-light conditions.
The highest and lowest aperture settings may
be affected by optical zoom.
Shutter speed—controls how long the shutter stays open. A shaking
hand icon warns of slow shutter speeds. (To prevent camera shake,
use a tripod for slow shutter speeds.)
Exposure Compensation—controls how much light enters the camera.
Add or subtract up to 2 EV in 0.3 EV steps. If the picture is too light,
decrease the setting; if it’s too dark, increase the setting.
Flash Compensation—controls the flash brightness (brighter: +0.5,
+1.0; less bright: -0.5, -1.0). You must be within flash range. Unavailable
if flash setting is Off.
ISO—controls sensitivity of the camera sensor (80, 100, 200, 400, 800).
Higher settings are more sensitive to light, but may produce unwanted
“noise” in a picture. You can only use ISO 800 if you are in the 1.1 MP
Picture Size setting. (See Picture Size, page 20.)
Children Action pictures of children in bright light.
Backlight Subjects that are in shadow or “backlit” (when light is behind
the subject).
Use this SCN mode For
Aperture
Shutter
Exposure
Mode
ISO
compensation
Flash
setting
compensation
speed

Taking pictures and videos
14 www.kodak.com/go/support
Settings apply only in P, A, S, M, and C modes
Settings you change in P, A, S, or M modes apply only to pictures taken in P,
A, S, and M modes. Settings you change in C mode apply only to pictures
taken in C mode.
For example, if you change the Color Mode to Sepia while in P, A, S, or M
mode, then Auto & Scene modes retain the default setting of Color.
NOTE: The settings, including Flash, are maintained for P, A, S, M, and C modes—even when
you change modes or turn off the camera. Use Reset to Default (see page 23) to reset P, A,
S, M, or C mode to its default setting.
Using the jog dial to change P, A, S, M, or C mode settings
1Turn the Mode dial to P, A, S, M, or C.
The mode settings are displayed. Available settings are white; unavailable
settings are grey.
2Use the jog dial:
■Rotate the jog dial to move the cursor to a setting, such as .
■Press the jog dial to open the setting.
■Rotate the jog dial to change the value of the setting. .
(Red settings are out of range and may cause unacceptable image/print
quality. Adjust the value higher or lower until it turns yellow.)
■Press the jog dial to save the setting.
3Press the Menu button to change other settings. (See page 20.)
4Take a picture.
the cursor or
Rotate to move
change settings.
Press to open or
save settings.
Jog dial