Kodak MAX HQ - One Time Use Camera User manual

CIS-209
July 2000
Wind Off
Check the frame counter window.
X’s must be visible.
If not, grip camera, press Shutter Button, and
turn Thumbwheel until film is fully rewound.
Insert special tool into end slot (as shown).
Open Film Door
Use tool to bend cover back and remove film.
Remove Film
© Eastman Kodak Company, 2000
Insert Tool
CAUTION: This camera body
contains a high voltage capacitor
and circuit board. To avoid electric
shock, do not pry apart the front and
back sections of camera. Remove
only film and battery from their
respective compartments. If sections
of the camera are separated, do not
touch the circuit board.
Exposed Film
Opened camera with film removed.
Shutter Button
Thumbwheel
5Place used camera in recycle bin.
Return camera to Kodak for recycling.
CAUTION: To avoid injury, use tool carefully.
CURRENT INFORMATION SUMMARY
Opening Instructions for the
KODAK MAX HQ Flash One-Time-Use Camera
Wear eye protection when opening all cameras.

Current Information Summaries provide information of limited or specific
application. Responsibility for judging the timeliness and applicability of the
information to a specific photographic use rests with the end user.
CIS-209
Opening Instructions for the New 7-00
KODAK MAX HQ Flash One-Time-Use Camera Kodak and Max are trademarks. Printed in U.S.A.
Consumer Imaging
EASTMAN KODAK COMPANY • ROCHESTER, NY 14650