KODE KD-DS02W User manual

Smart Door and Window Sensor
User Manual

KODE
* Work with hub,please visit www.kodetech.cn for more details.
Product Introduction
KODE
* Work independantly with App
Smart Door and Window Sensor
User Manual

* If the connection fails when works with Hub,please move the accessory closer
to the Hub and try again.
I, Work Independently by APP
II, Work with Hub
Please add the Hub to the app according to the Hub Quick Start Guide.
1.Download App “Smart Life” from iOS Store or Google
Play or scan the following QR code to download the
APP.
* The mobile devices shall support iOS 8.0 above,Android 4.4 above.
2.Enter the register/log in in interface,input the phone
number for getting the verification code to register an
account.
3.Please open the App,tap “Home” and the tap “+” in the
top right corner to enter “Add Device” page.Select “Security
& Sensors” and then select “Contact Sensor(WIFI)”,and
add it according to instructions.

communicate effectively with the Hub when works with Hub.

30
when works with Hub.
30

Model:KD-DS02W
Protocol:Wifi 2.4G
Input Voltage:DC3V (2pcs×AAA1.5V)/LR03
Triggering Distance:15-30mm
Output Signal:Door Close/Open Alert,Tamper Alarm,
Battery Status
Dimensions:69.5×24×18.5mm
Working Temperature:-10℃- 50℃
Customer Service:[email protected]
Manufacturer:KODETECK CO.,LTD
Add:No.71,Detai Ave,Economy and Technology
Development Zone,Quanzhou,Fujian,CHINA