Product Setu and Usage
•When turned on, press the 'SET' button for 3 seconds to enter settings mode.
In this mode, you can set the Year, Month, Date, 12H/24H, Hour, Minute and Alarm.
•When editing any of the settings above, simply press the UP or DOWN button until
the correct value is sho ing, then press SET to select the value.
•If you set a value incorrectly, you can rene the settings back to their factory default
by pressing the RESET button.
•When using the 12 hour display format, PM hours are signified by the LED light on
the top corner lighting up.