Kogan KAM172UPSFA User manual

USER GUIDE
172L UPRIGHT FREEZER
(KAM172UPSFA, KAM172UPWFA)

2
CONTENTS
THIS USER GUIDE COVERS THE FOLLOWING MODELS
Kogan 172L Upright Freezer – Stainless Steel (KAM172UPSFA)
Kogan 172L Upright Freezer – White (KAM172UPWFA)
Safety and warnings ................... 03 - 04
Product overview...................................05
Installation..................................... 06 - 09
First time use..................................... 10 - 11
Cleaning & maintenance.............. 12 - 13
Troubleshooting...................................... 14
Specifications.......................................... 15

3
Thank you for buying this Kogan product. Please read all safety instructions before using
your fridge or freezer.
• This appliance is only intended for use within a domestic environment only.
• If the supply cord is damaged, it must be replaced by Kogan.com or an authorised service
agent on Kogan.com’s behalf.
• Do not store explosive substances such as aerosol cans with a flammable propellant in this
appliance.
• The appliance must be unplugged aer use and before carrying out user maintenance on
the appliance.
• WARNING: Keep ventilation openings in the appliance enclosure or in the built-in structure
clear of obstruction.
• WARNING: Do not use mechanical devices or other means to accelerate the defrosting
process, other than those recommended by the manufacturer.
• WARNING: Do not damage the refrigerant circuit.
• WARNING: Do not use electrical appliances inside the food storage compartments of the
appliance, unless they are of the type recommended by the manufacturer.
• WARNING: When positioning the appliance, ensure the power cord is not trapped or
damaged.
• WARNING: Do not locate multiple portable socket-outlets or portable power supplies at
the rear of the appliance.
• Do not use extension cords or ungrounded, （two prong（ adapters.
• Refrigerant and cyclopentane foaming material used for the appliance are flammable.
Therefore, when the appliance is scrapped, it shall be kept away from any fire source and
be recovered by a special recovering company with corresponding qualification other than
be disposed by combustion, so as to prevent damage to the environment or any other
harm.
Children:
• This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a person responsible for
their safety.
• Children should be supervised to ensure that they do not play with the appliance.
Unpacking:
• During transportation, protective packaging was used to protect the appliance against any
damage. Aer unpacking, please dispose of all elements of packaging in a way that will
not cause damage to the environment.
• CAUTION: During unpacking, the packaging materials (polythene bags, polystyrene
pieces, etc.) should be kept out of reach of children.
SAFETY AND WARNINGS
WARNING: RISK OF FIRE / FLAMMABLE MATERIALS

4
Disposing:
• Old appliances should not simply be disposed of with normal household waste, but should
be delivered to a collection and recycling centre for electric and electronic equipment. A
symbol shown on the product, the instruction manual or the packaging shows that it is
suitable for recycling.
• Materials used inside the appliance are recyclable and are labelled with information
concerning this. By recycling materials or other parts from used devices you are making a
significant contribution to the protection of our environment.
• Risk of child entrapment. Before you throw away your old refrigerator or freezer:
• Take o the doors.
• Leave the shelves in place so that children may not easily climb inside.
• Information on appropriate disposal centres for used devices can be provided by your local
authority
SAFETY AND WARNINGS (cont’d)

5
PRODUCT OVERVIEW
1 Temperature selector
2 Door
3 Drawers
4 Flip-out drawer
5 Adjustable feet
1
3
4
5
2

INSTALLATION
SELECTING A SUITABLE LOCATION
When selecting a position for your unit, ensure the floor is flat and firm, and
the room is well ventilated. Avoid placing your unit near a heat source (ie,
oven, radiator, or hot water system). Avoid direct sunlight as it may increase
the electrical consumption. Extreme cold temperatures may also cause the
unit to not perform correctly. This unit is not designed for use in a garage or
outdoors. Do not drape the unit with any covering.
When installing the unit, ensure that 10cm of free space is allowed to the
left, right, rear and top of the unit. This will allow cold air to circulate around
the unit and improve the efficiency of the cooling process.
Door space requirements
The unit’s door must be able to open fully as
pictured (1a).
Levelling the unit
To level the unit, adjust the two feet at the front
of the unit – turning clockwise to extend and
counter-clockwise to reduce. If the unit is not level,
the door and magnetic seal alignments will not
be covered properly, leading to inefficient freezing
performance (1b). Ensure that the feet all touch
the ground before use.
Figure 1a
Figure 1b

7
Reversing the door swing
1. Remove the top right hinge cover.
2. Using a Phillips head screwdriver, remove the screws that fix the
top hinge into place.
3. On the removed top door hinge, remove the door hinge pin that
holds the door in place and swap to the other side of the hinge
bracket (2a). Place this to one side.
Figure 2a
Figure 2b
TOOLS REQUIRED
Phillips head screwdriver
4. Remove the door limit block from the top of the door and move to
the other side of the door (2b).

8
INSTALLATION (cont’d)
5. Using a Phillips head screwdriver, remove the screws fixing the
bottom hinge. Whilst removing the bottom hinge, ensure the
freezer incline angle is less than 45 degrees – do not lay it flat.
6. Follow the same procedure as inverting the hinge pivot point in
the upper hinge bracket (step 3), and fix the lower bottom hinge
bracket in place on the other side of the freezer (2c).
7. Insert the door into the bottom hinge pivot and re-fix the top hinge
bracket, securing the door into place.
8. Replace the hinge covers and use the adjustable feet to ensure the
freezer is level.
Figure 2c

9
Door handle install (optional)
1. Remove the two plug pins from door’s opening side (3a).
2. Place the door handle and fasten with the two M3x10mm screws,
tightening with a Phillips head screwdriver (3b).
3. Cover the screw heads with caps (3c).
TOOLS REQUIRED
Phillips head screwdriver
Figure 3a Figure 3cFigure 3b

10
FIRST TIME USE
POWER SOURCE AND GROUNDING
It’s recommended to use the vertical freezer on its own dedicated power
outlet for both convenience and safety. The power outlet must be
grounded.
Important! If the supply cord is damaged, it must be replaced by
Kogan.com or an authorised service agent on Kogan.com’s behalf. Cease
use and ensure the appliance is completely disconnected from the power
supply.
Cleaning before use
Wipe the inside of the unit with a weak solution of bicarbonate soda,
then rinse with warm water using a wrung-out cloth or sponge. Wash
the shelves and drawers in warm soapy water and dry completely
before replacing in the unit. Clean the exterior of the unit with a damp
cloth. Further cleaning instructions can be found on page 12.
Before using your unit
• You must also wait at least two hours after moving the unit, before
turning the appliance on.
• Do not use when the power cord is damaged or the plug is worn.
• Do not alter the power cord under any circumstances, so as to ensure
safe use.
• Do not put flammable, explosive, volatile and highly corrosive items in
the refrigerator to prevent damages to the product or fire accidents.
• Do not place flammable items near the refrigerator to avoid fires.
• This product is a household refrigerator and is only suitable for the
storage of foods.
• According to national standards, household refrigerators shall not be
used for other purposes, such as storage of blood, drugs or biological
products.
• Do not place items such as bottled or sealed container of fluid such as
bottled beers and beverages in the freezer to prevent bursts and other
losses.
• Before placing any food in your unit, turn it on and wait for 24 hours, to
make sure it is working properly and to allow it time to fall to the correct
temperature. Your unit should not be overfilled.

11
• Important! Before plugging in your freezer, you must check that you
have a power outlet which is compatible with the plug supplied on the
appliance lead.
Operation
• The temperature selector is located on the middle of the upper beam.
• Setting “Min” = Moderate cool temperature
• Setting “Mid” = Normal operation (suitable for most environments)
• Setting “Max”= Coolest temperature
• During high ambient temperature days (ie. hot summer days), it may
be necessary to set the temperature to the coolest setting (“Max”). This
may cause the compressor to run continuously in order to maintain a
low temperature within the cabinet.
• For the first time you install your refrigerator, set the temperature at
“Mid” and give your refrigerator time to cool down completely before
adding food (normally up to 24 hours).
Noise from your freezer
• You may notice that your freezer makes some unusual noises. This is
completely normal for refrigerators and freezers, and the noises are
caused by the circulation of the refrigerant liquid within the cooling
system.
Tips for keeping food within the freezer
• Cooked meats & fish should always be stored on a shelf above raw
meat/fish to avoid bacterial transfer. Keep raw meat/fish in a container
which is large enough to collect juices and cover properly, placing the
container on to the lowest shelf.
• Leave space around your food to allow air to circulate inside the unit.
• Ensure all parts of the appliance are kept cool.
• To prevent transfer of flavours and drying out, pack or cover the food
separately. Fruit and vegetables do not need to be wrapped.
• Always let pre-cooked food cool down before you place into the freezer.
This will help to maintain the internal temperature of the freezer.
• To prevent cold air from escaping the freezer, try to limit the number of
times you open the door.

12
CLEANING AND MAINTENANCE
WARNING! To avoid an electric shock, always unplug your freezer
before cleaning.
Defrosting
• For the most efficient operation and minimum energy consumption,
defrost the freezer when the frost on the freezer walls is excessive or
5mm thick. To minimize disruption, choose a time when the stock of
frozen food is low.
• Important! Do not use boiling water because it may damage the
plastic parts. In addition, never use a sharp or metallic instrument
to remove frost as it may damage the cooling coils and will void the
warranty. We recommend using the plastic scraper.
• Remove the frozen food from the freezer and place it in a cooler to
protect the food.
• Unplug the freezer. The Power Supply light should be off (green light
out).
• During defrosting, the ice melts in the cabinet and drains out through
the bottom front.
• Place a shallow pan outside the front base to capture the defrost
water. Check the pan occasionally so the water does not overflow.
• Clean the interior of the freezer and wipe any residual ice or water from
the cabinet.
• Reset the thermostat to desired setting.
• Switch on the temperature control to the highest setting for two hours
before using, and then adjust to normal level.
• Return food to the freezer.
TIP
Defrosting usually takes a few hours. Leaving the door open will help
speed the process.
Also, pouring warm water (not boiling) on the ice/frost will help speed
melting. If you must use a scraper- please use caution - it is very easy
to damage the freezer compartment and void your warranty.

13
Cleaning the inner cabinet
• Caution: Before using any cleaning products, please read and follow
the manufacturer’s instructions and warnings to avoid any damage to
your Freezer or personal injury.
• Upon installation of your new appliance, it is recommended that it be
cleaned thoroughly.
• Wash the inside with a damp warm cloth containing a water and
baking soda solution.
• The solution should be about 2 tablespoons of baking soda to 2L of
water.
• Wash the storage basket with a mild detergent solution.
• Be sure to keep the door seal clean to keep the unit running efficiently.
• The outside of the freezer should be cleaned with mild detergent and
warm water.
• Dry the interior and exterior with a soft cloth.
• The condenser coils should be carefully vacuumed when they are dusty
or dirty.
• It is recommended that the unit be cleaned each time it is defrosted to
help keep the unit odour free and running efficiently.
• Clean your door gasket seals every 3 months using the same warm
water solution described above.

14
BASIC TROUBLESHOOTING
Freezer isn’t operating
• Check that the freezer is plugged in
and connected to power.
• Check that a fuse hasn’t blown or
circuit tripped.
Freezer is making strange odour
• Odourous foods should be closely
wrapped and sealed in containers.
• Ensure that the interior is clean.
Refer to cleaning instructions.
Freezer compressor is continuously
running
• It is normal for the freezer
compressor to operate for longer
periods of time when the ambient
temperature is higher (ie. Summer).
• Do not put too much food in the
freezer at one time.
• Do not put warm/hot foods into the
freezer.
• Try to minimise the frequency of the
door opening.
Illuminating light does not work
• Ensure the freezer is connected to
power.
• Check that the globe hasn’t blown.
The freezer door doesn’t close
properly
• Ensure that food isn’t preventing the
door from closing.
• Ensure that the freezer is completely
level and feet adjusted to touch the
floor.
• Ensure the freezer door gaskets/seals
are clean.
The freezer is making loud noises
• It’s normal for the freezer to make
noises when refrigerant coolant is
being circulated.
• Check that the freezer is correctly
levelled.
For our full FAQ and troubleshooting guide,
head online to help.kogan.com

15
Capacity
Volume 172L
Dimensions
Dimensions (W x D x H): 550 x 550 x 1420mm
Packaged Dimensions (W x D x H):585 x 585 x 1450mm
Weight 45kg
Electrical
Refrigerant R600a, 54g
General
Colour Stainless Steel (KAM172UPSFA)
White (KAM172UPWFA)
Hardware
Compressor Type PZ59D1E
Power
Current 0.5A
Energy Consumption 270kWh per year
Energy Rating 3.0 Star
Rated Power 61W
Voltage 220V-240V/50Hz
SPECIFICATIONS
Note:
• Design and specifications are subject to change without notice.
• Weight and dimension shown are approximate.

Need more information?
We hope that this user guide has given you the
assistance needed for a simple set-up. For the
most up-to-date guide for your product, as well
as any additional assistance you may require,
head online at help.kogan.com