Kogan SMARTERHOME KAFHDSLDBELA User manual

KOGAN SMARTERHOME™ FULL HD SLIM WIRELESS
SMART VIDEO DOORBELL WITH CHIME
KAFHDSLDBELA


Component
Description
Speaker
Audio output
Lens
Video capture
Infrared LED
Additional light in low-light conditions
Light Sensor
Light sensor
Indicator light
Status Indicator light shows the doorbell’s status
Doorbell button
You will receive notification from the mobile app when it’s pressed
Microphone
Detects sound for the mobile App
OVERVIEW
Microphone
Lens
Light sensor
Motion sensor (PIR)
Ring button

Component
Description
CE Label
Product label
Reset
By pressing the reset button on the back of the device for more than 3
seconds, you will hear a sound and see the indicator light blinking red.
(Be advised that all your data on the device will be reset to default)
Alarm button Tamper alarm
USB Port
Connect to charge the doorbell
Power Switch Power OFF/ON
ON/OFF
Reset
USB slot
TF card

Method 1
Step 1: Stick the double-sided 3m stickers on the bracket.
Ac Plug
Volume Control
Back Button
Forward Button
Speaker
INSTALLATION

Step 2: Tear off the protective film on the 3m stickers, apply it on a smooth wall surface at
the appropriate height. Hang the device on the bracket from the top-down lining up the hole
at the back of the device. Tighten the screw on the bottom of the unit to the bracket.
Method 2
If you want to install the device on a rough wall (such as concrete, brick or a wooden
surface), use screws to fix the bracket.

❶Set the bracket on the wall according to the required height by screws.
❷Hang the device on the bracket from the top-down lining up the hole at the back of the
device. Tighten the screw on the bottom of the unit to the bracket.
Install App
Download the “Kogan SmarterHome” app from the Play Store (Android) or App Store (iOS).
Register
If you do not have a Kogan SmarterHome™ account, register or sign in with a verification
code sent by SMS.
To register:
1. Tap to enter registration page.
The system automatically recognises your country/area. You can also select your
country code manually. Enter your email address and tap ‘Next.’
Alternatively, you can select ‘Register by mobile number’ and enter the verification code
sent to you by SMS.
Create a profile on the next page to define your location and room.
CONNECT TO SMARTERHOME™ APP

Set device in pairing mode
When the device is first turned on, it may automatically enter pairing mode and the blue
light will blink quickly.
If not automatically in pairing mode when powered on, you can manually set the device in
pairing mode by holding the reset button for five seconds until the light flashes blue rapidly.
Using Smart Mode to add device
Once registered, tap “+” in the upper right corner of the app’s home page to add a new
device through the network.
Select the product type from the list of options in the app Home Security > Door Bells,
and then select “Other Mode” from the top-right corner when asked to reset the
device.

Select “Smart Mode” for the set-up type.
Ensure that the device is in pairing mode, and tap “Confirm light is rapidly flashing”.
Upon successfully confirming pairing mode, enter your Wi-Fi details. It is important that your
SmarterHome™ device and the app are connected to the same Wi-Fi network during setup.

The device will commence the pairing process and connect to the app. Ensure your Wi-
Fi router, mobile phone, and the SmarterHome™ device are kept close until
connection is complete.
After successfully being added, you will have the option to rename the device and
assign it to a location. It will now be listed on the app’s home page. Tap the device
listing to enter its control page.
Notes:
•The device and the app have to use the same Wi-Fi network.
•The device is only compatible with 2.4Ghz networks.

Note: You will need to have set up a Google Home account prior to linking your Kogan
SmarterHome™ device.
1. Select “Menu” and then “Home Control”.
2. In the “Home Control” screen, select the “+” icon in the bottom right.
3. A list will appear showing actions and a search function to access more apps from
here, install the SmarterHome™ app.
Login to App
Add Device
Select Device
4. Log into your SmarterHome™ account with your email address or mobile number.
5. Once linked, it will show the devices linked to your account, you can assign them to
rooms. You will be prompted to authorise apps to sync.
6. Click “Done” and then it will give you a list of commands available.
7. When successfully linked, you will see it on your “Home Control” screen at the
bottom of the app screen. You can now control your Kogan SmarterHome™
devices through Google Home.
GOOGLE HOME CONTROL

Set Up New Device
Add and Manage Device
Assign Room
Update Home Control

Note: You will need to have set up an Alexa account prior to linking your Kogan
SmarterHome™ device.
1. Select “Menu” and then “Skills”.
2. Search for the app and enable it.
3. Log into your SmarterHome™ account with your email address or mobile number.
4. Select “Discover Devices” and the app will begin searching.
5. When successfully linked, you will see a list of connected Kogan SmarterHome™
devices. You can now control your Kogan SmarterHome™ devices through Alexa
with your voice.
Alexa Account Setup
Search App in All Skills
Enable App
ALEXA

Login to App
Discover Devices
Setup Device

❶Open the waterproof cover on the back of the device.
❷Switch it from [OFF] to [ON] and then put the cover on.
OPERATION
Waterproof Cover

LED Indicator
No
LED status
Device status
1.
Fast blinking blue LED (5 times per
second)
Trying to connect to Wi-Fi
2.
Slow blinking red LED (2 times per 3
seconds)
Ready or reset to successfully configure
3.
Slow blinking blue LED (1 time per 3
seconds)
Connecting to service
4.
Blue and Red LED are off
Sleep mode or off-line
5.
Fast blinking blue and red
Firmware upgrade
6. Bright blue LED
Networking is successful and working
properly or watch live video
Paring the indoor chime to a Doorbell
1) Select your favourite ringtone before pairing.
(Img: 1.1)
2) Press and hold the volume control button for 5 seconds until a Ding-Dong is heard
and the LED indicator starts flashing to enter into pairing mode.
3) Press the doorbell's ring button to send a signal to the chime. When the pairing is
successful, the indoor chime will play the selected ringtone automatically.

(Img: 1.3)
Sound volume control
Press the volume control button on the chime, this switch toggles between High and Low
volume.
(Img: 2)
Note:
1. Pairing mode will only last for 5 seconds.
2. Pairing mode will quit automatically after pairing is completed.

Set Ringtone
There are 52 ringtones to choose from:
1) Press Forward or Back button to choose your favourite ringtone, the chime will play
the ringtone selected.
2) Please follow the pairing steps to sync the new ringtone. The new ringtone will be
set for the most recently synced doorbell.
3) The ringtone can be set differently for a different doorbell.
Two or more doorbells pairing
The pairing mode is available for a doorbell only each time. For two or more doorbells, please
follow the pairing steps once again to get the doorbell paired on by one.
Two or more indoor chimes pairing
Just need to follow the pairing steps to pair two or more indoor chimes to one doorbell.
Reset
Press the forward button for 5 seconds to reset the chime to default. When the chime sound
Ding-Dong with LED flashing that means reset succeeds, the setting is back to default: It
comes bad to the 1st music, no doorbell is paired with the chime.
Charging Your Doorbell
•Loosen the screw at the bottom of the doorbell and remove the doorbell from the
bracket. You will hear the alarm sound for approximately 1 minute.
•Take the device inside for charging. Using the supplied micro USB cable, connect
the device to a 5V/2A USB power adaptor and allow the unit to charge for a
minimum of 4 hours. (For convenience, you can use the USB adaptor of your mobile
phone).

Main Features
100% Wire-free operation
IP65 Waterproof
1080P FULL HD video
TF card recording up to 128GB
Super wide view angle
Clear night-vision
Two -way full-duplex communication
AC power supply outlet
100-240 V
5V/2A

Working voltage
AC 85-256V
Wireless range
80ft.
Audible range 150ft.
Selectable ringtones 52
Volume range
25-110DB, 4 levels
Working frequency 433.92MHz+- 280KHz
Working temperature -30C - 70C
After configuration is complete, the device will show on the mobile App and you will be able
to use your smart device.
If you should have any questions about using the App or the device, visit the Kogan Help
Centre: https://help.kogan.com
TROUBLESHOOTING
SPECIFICATIONS
Table of contents
Other Kogan Intercom System manuals