Kogan KAKBBT24PTA User manual

BLUETOOTH & 2.4GHZ DUAL MODE
PORTABLE KEYBOARD
KAKBBT24PTA

Wireless keyboard
Stand
USB receiver
(inside keyboard)
AAA alkaline
battery (x2)
User guide
COMPONENTS

Step 1:
• Open the battery compartments on the keyboard.
• Insert x2 AAA batteries paying attention to orientation of the polarity symbols
( + , - ).
Step 2:
Tu r n o n t h e p o we r s w i t c h .
INSTALLATION

• Remove the USB receiver from the battery compartment.
• Plug the USB receiver into a USB port on your computer.
The keyboards default factory setting is 2.4G wireless mode (The 2.4G keyboard indicator
lights up in white). When the connection is successful, the indicator will go turn off.
USB
Note:
It may take a few minutes for the keyboard to be usable as required drivers may
automatically install to facilitate usage.
2.4G WIRELESS CONNECTION

Windows:
1. Press and hold the BT1 button on the keyboard for 3-5 seconds until the white light
begins to flash rapidly.
2. Ensure that computer supports Bluetooth and is turn on.
3. select Start > Settings > Devices > Bluetooth & other devices > Add Bluetooth or
other device > Bluetooth
4. Search for “BT 3.0 Keyboard” or “BT5.0 KB” and click to pair your keyboard.
5. The keyboard is now connected and can be used normally.
BLUETOOTH CONNECTION
Note:
Bluetooth 3.0 supports Windows XP/7/8/10 and MacOS 10.14. Bluetooth 5.0
supports Windows 8/10 Mac10.14

MacOS:
1. Press and hold the BT2 button on the keyboard for 3-5 seconds until the white light
begins to flash rapidly.
2. Ensure that computer supports Bluetooth and is turn on.
3. Open “System Preferences”
4. Search for “BT 3.0 Keyboard” or “BT5.0 KB” and click to pair your keyboard.
5. The keyboard is now connected and can be used normally.
Note:
Bluetooth 3.0 supports Windows XP/7/8/10 and MacOS 10.14. Bluetooth 5.0
supports Windows 8/10 Mac10.14

iOS:
1. Press and hold the BT1 button on the keyboard for 3-5 seconds until the white light
begins to flash rapidly.
2. Ensure that iOS device supports Bluetooth and is turn on.
3. On you iOS device open “Settings”.
4. Select “General>Bluetooth”.
5. Search for “BT 3.0 Keyboard” or “BT5.0 KB” and click to pair your keyboard.
6. The keyboard is now connected and can be used normally.
Android:
1. Press and hold the BT1 button on the keyboard for 3-5 seconds until the white light
begins to flash rapidly.
2. Ensure that Android device supports Bluetooth and is turn on.
3. On you Android device open “Settings”.
4. Select “Bluetooth”.
5. Search for “BT 3.0 Keyboard” or “BT5.0 KB” and click to pair your keyboard.
6. The keyboard is now connected and can be used normally.

This keyboard features 3 channels. (2.4G, BT1 & BT2) allowing it to be paired to up 3
different devices simultaneously.Once all your devices are connected you can easily switch
between them:
1. Press the corresponding channel button for 1 second.
2. The indicator will illuminate for 3 seconds and then turn off.
3. The keyboard is now ready to be used.
Low Battery
When the battery power is too low, the battery symbol will flash red. The
battery will need to be replaced.
OPERATION

Quick-function Buttons
Function lock
switch F1- F12 and
multimedia
Increase
brightness
Reduce
brightness
Mission control
Return
Search
Previous track
Play/Pause
Next track
Mute
Volume up
Volume down
Input method switch
Sleep
(only available in
Windows)
Before using the quick-function buttons ensure you have switched the keyboard to the
correct operating system otherwise they will not operate correctly.
To s w i t c h o p e r a t i n g systems, press the following buttons simultaneously:
• iOS: Press “fn + i”
• MacOS: Press “fn + O”
• Windows: Press “fn + P”
By default, the quick-function buttons will be active. To access the standard function
buttons (F1-F12) press the “esc + fn” buttons simultaneously.
To r e v e r t b a c k t o t h e q u i c k-function buttons press the “esc + fn” buttons simultaneously
again.

Wireless data transmission
2Mbps
Frequency
2403MHZ- 2480MHZ
Working voltage
3V
Size
435x143x26.41mm
Weight
497.0 ± 10g
Connection System Support
• 2.4G
• Bluetooth 3.0 System Support XP
Windows 7/8/10 Mac10.14
• Bluetooth 5.0 System Support
Windows 8/10 Mac10.14
2.4G Wireless Connection
Working current
2.0 ± 0.5mA
Standby current (3 seconds pause)
0.01mA
Tr a n s m i s s i o n d i s t a n c e
20m
Bluetooth Connection
Working current
2.0 ± 0.5mA
Standby current (3 seconds pause)
0.15mA
Tr a n s m i s s i o n d i s t a n c e
10m
SPECIFICATIONS

Need more information?
We hope that this user guide has given you
the assistance needed for a simple set-up.
For the most up-to-date guide for your product,
as well as any additional assistance you may require,
head online to help.kogan.com