Kogan KAPRNTPKLBA User manual

PORTABLE POCKET
BLUETOOTH LABEL PRINTER
KAPRNTPKLBA

2
Safety & Warnings
3
Components
4
Overview
4
Operation
7
Cleaning & Care
15
Troubleshooting
16
Specifications
17
Notes
18

3
FCC Caution
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions.
1. This device may not cause harmful interference and
2. this device must accept any interference received, including interference that may
cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Notes:
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures.
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
SAFETY & WARNINGS
WARNING: RF warning for Portable device:
• The device has been evaluated to meet general RF exposure
requirement.
• The device can be used in portable exposure condition without
restrictions.

4
Label Maker
User Guide
USB Charging Cable
COMPONENTS
OVERVIEW
Paper compartment
cover
Window
Paper
compartment
Print head
Paper exit
Slider cutter
Indicator
Power Button
Charging port

5
Label paper
Various label paper is are available for purchase for this printer.
The label paper features an ‘easy tear’ line, to help peel off the adhesive backing.
Gently bend the label paper along the ‘easy tear’ line to make it easier to peel the bottom
paper from the adhesive.
Cut paper
Continuous paper
Continuous paper printing surface
Back of continuous paper
Easy tear line
Bottom paper
Easy tear line
Adhesive

6
Power Button and Indicator
Power button
Button
Operation method
Functions
Power button
Press and hold for 3s
Turn On/Off
Short press
Print out the paper
Double press
Print the content of the
self-test paper
Indicator status
Solid Green
Normal status
Slowly flashing Green
Charging with power on
Rapidly flashing Green
Charging with power off
Solid Red
Error (low paper, cover opened, high
temperature)
Slowly flashing Red
10% battery
Rapidly flashing Red
5% battery
Indicator

7
1. Open the paper compartment cover.
2. Place the label paper in the paper
compartment with the printing side
facing up.
3. Pull out approximately 5mm of the
label paper.
4. Align the tabs on the cover with the
holes in the printer and close the cover.
5. Press and hold the power button for 3s
to turn on.
6. Short press the power button to
identify the label position.
OPERATION
Printing side faces
toward this direction
About 5mm

8
7. The printer will eject a small amount of
paper. Paper installation is completed.
8. After printing a label, slide the cutter
up to tear off the label.
Notes:
• When installing or replacing the label roll for the first time, the label position
identification is required; (Step 6.).
• If the label position identification is not carried out, failures may occur such as first
printing missing, not centred etc.
• When using, continuous paper, if will not be required to press the power button for
positioning. Instead, pull the paper until it is in position.
Download the Print Master App
Print master
Notes:
• This product requires the Print Master App to operate.
• Android mobile phone will need to enable GPS and confirm the authorisation.

9
Use your mobile phone to scan the QR
code to download the APP.
Alternatively, search for “Print Master” in
the App Store (iOS) or Google Play Store
(Android) and download.
Pair the Label Printer to your Phone
1. Turn on GPS (Android mobile phone only)
2. Open the App
3. Click “Connect now” to search for your
device
4. Once connected the label printer
is ready to be used.
Note: When connecting device in the App, make sure that your Label Maker is turned on
and Bluetooth is enabled on your mobile phone.
Print master
Privacy
Location Services:
On

10
Confirm the Label Size
Method 1: Check the sticker on the label
paper.
Method 2: Check the label paper
packaging
Method 3: Use a ruler to measure
Method 4: Check the label paper pads.
Product: Pattern label
Model: DP-P06
Detail: Seal, Snow fox
Spec: 12 x 40mm/210pcs
Quantity: 3
40mm
12mm

11
Creating Labels
From the home menu, select from either Lite or Creation mode depending on your
requirements.
• Lite mode: Edit simply, print quickly
• Creation mode: Requires more time to edit but has more options (multifunctional,
graphic icons, QR codes etc.)
Note:You can view operation tutorials and switch editing versions in the “home” menu.

12
Lite Mode
1. Select “Label Setting”
2. Select the label size
3. Click “(T)” to input text
4. Edit function description
5. After editing, click "Print"
6. After printing, slide the cutter up to tear
off the label
7. If using continuous paper tear off the
bottom paper adhesive backing.
Print master
Click to enter content
Click to enter content
Print master
Label setting
Blank label
12x40mm
Print master
Label
Note:
If the paper size is selected incorrectly, there will be undesirable results such as
misaligned printing layout and uneven layout etc.
Text
attribute
Date
Time
Symbol
Label
Text direction
Save

13
Functions
Operation method
Example
Click to insert text. User can
edit the text size, typesetting
and select various fonts, etc.
Add date
Edit specific time point
Unit symbol
Creation Mode
1. Select “Label Setting”
2. Select the label size
3. Click “(T)” to input text
4. Edit functions
Print master
Click to enter content
Click to enter content
Print master
Label setting
Blank label
12x40mm
Print master
Blank label 12x40
Text
Delete
Enlarge
Shrink
Undo
Redo
Text
Icon
Border
Picture
Time
1D code
QR code
Line
Shape
Excel
Milk 2021/3/1
Milk 18:44pm
Milk 500ml

14
5. After editing, click to
"Print"
6. After printing, slide the
cutter up to tear off the
label
7. If using continuous
paper tear off the bottom
paper adhesive backing.
Functions
Description
Click to insert text. User can edit the text size, typesetting and select
various fonts, etc.
Click to insert all various icons and symbols.
Click border function to select various borders to decorate your label.
Click to insert a picture stored on your device.
Insert date and specific time.
Click to scan the code to identify. It can quickly identify the text content
in the QR code.
Click to insert a one-dimensional code. Enter the information to be
edited, then a one-dimensional code can be automatically generated
and the layout can be adjusted.
Click to insert a QR code. Enter the information to be edited, then a QR
code can be automatically generated and the layout can be adjusted.
Insert a line. Select between a dashed line or a solid line.
Click to insert round or square shapes.
Insert a table.
Optical character recognition (OCR). Use your camera to scan text.
Note:Functions will continually be updated with new features. Refer to the App for the
latest functions.
Label
Text direction
Save

15
1. Turn off the Label Maker.
2. Use a cotton swab dipped in a little
alcohol.
3. Wipe the print head gently.
4. Allow the alcohol to evaporate and
then turn it on and double click the power
button to print labels.
CLEANING & CARE
Note:
Do not scratch the print head with hard objects, otherwise the thermal film will be
permanently damaged and cannot be repaired.

16
Problem
Solution
The printer cover won’t close.
Ensure the tabs on the paper
compartment cover are aligned with the
holes in the printer.
Label, not centred, misaligned, offset,
skipped, poor printing etc.
• Ensure the paper roll is correctly
installed in the printer.
• Ensure that the label is placed in the
printer with printing side facing left. If it
is placed incorrectly (reversed), printing
will fail.
• Check the label size and image on the
label packaging and choose the
correct template in the App. To do so,
select "Label Setting".
Do I need to click the power button to
allow the machine to calibrate and
position the label?
When installing or replacing label paper
roll for the first time, click the power button
to print a blank label so that the print head
can identify the position of label paper.
When using continuous paper, do not click
the power button for positioning, just pull
out the paper outlet.
Printing is blurry.
In the profile menu on the app, select
“Printer” and choose “ ” to view the
printer’s batter level.
If it is less than 10%, charge the printer
using the supplied charging cable.
Printer will not connect via Bluetooth.
Ensure the printer is on and Bluetooth is
enabled on your phone or device.
For android phones, ensure the GPS is on
and confirm authorisation in your privacy
settings.
There is foreign matter or glue on the print
head.
Use a cotton swab dipped with a little
alcohol to gently wipe the dirt on the print
head. Allow to dry before printing.
TROUBLESHOOTING

17
Printing technology
Thermal printing
Consumable width
6-15mm
Effective printing width
12mm
Supported paper
Pre-cut paper, black mark paper, continuous
paper
Printing density
Light, standard, dark
Printing resolution
203dpi
Print head service life
50km
Communication interface
Bluetooth
Dimensions
135 x 79.6 x 29.2mm
Power input
5V=2A
Power supply method
USB-C
Supported operating system
Android/iOS
SPECIFICATIONS

18
NOTES

19

20
Need more information?
We hope that this user guide has given you
the assistance needed for a simple set-up.
For the most up-to-date guide for your product,
as well as any additional assistance you may require,
head online to help.kogan.com