Kogan ZA Smart TV Series User manual

ZA Smart TV Series
QUICK START GUIDE

GETTING STARTED
Unpacking your Television
Ensure the following accessories are included in the box with your TV.
•Remote control and batteries
(2 x AAA)
•Quic Start Guide
•Lin to Full User Manual
•TV Stand and 5 x Screws
Assembling your Stand
For large TVs, we recommend having a second person assist you in safely
removing the TV from the box.
Ensure you have the following tools and cables available to get up and
running as fast as possible.
~ Philips-head Screwdriver
~ Coaxial (RF) Cable
Attaching the Stand
With help from another person, remove the TV from the box and lay it face
down on large flat surface. Attach the stand using the screws provided with
a Philips-head screwdriver.

ositioning your TV
•Position your TV in it's final resting
place.
•Remove all protective sleeves and
plastic stic ers from the TV.
•Ensure there is approximately
10cm of space around the TV for
ventilation.
owering On
Plug in the power cord
and switch on the power.
Chec the hard power
switch and ma e sure it is in
the ON position.
Power on the TV by
pressing the Power button
on the remote control.
Tuning Channels
Press the power button on the remote to turn
on the TV. After a brief delay, you will be
presented with a dialogue to help you
automatically tune available channels.

Front anel Overview
The buttons on the lower-right hand panel control your TV's basic features,
including the on-screen menu. To use more advanced features, you must use the
remote control.
1. STANDBY BUTTON
Press this button to toggle between ON and STANDBY modes.
2. VOLUME CONTROLS
Press to increase or decrease the volume. Also used as le t/right arrows in the on-screen menu.
3. PROGRAM CONTROL
Press to change channels. Also used as up/down arrows in the on-screen menu.
4. MENU
Press to see an on-screen menu o your Televisions eatures.
5. TV/AV
Toggles between all available input sources.
6. REMOTE CONTROL SENSOR
Aim the remote control towards this point on your television.
7. POWER INDICATOR
Red: In STANDBY mode.
Green: In power ON mode.
8. POWER SWITCH
Press this to allow your television to use electricity to power up.
Note: This button MUST be pressed or the television to work.
9. 3D SYNC SIGNAL EMITTER
Sends out the sync signal or 3D shutter glasses.

SMART TV Application Features
1- Android 4.2 dual-core smart TV 5- MHL
2- Networ Connection(Wired/Wireless/PPPOE/WLAN) 6- Application Installation
3- DLNA 7- Google Play Store
4- Home Share 8- USB 3.0
1. Android 4.2 Dual Core Smart TV
Equipped with a dual-core processor, the latest CPU (1.2G) and a Mali400
Quad Core GPU, this Smart TV contains a robust system configuration
designed to run the newest software applications.
You can enjoy your favourite applications, downloads, internet content and
human-computer interaction (such as Surfing the Web, SNS Social Networ ,
Online Video Playbac , Online Video Chat and creating a home
entertainment centre between the TV and your portable devices.)
This TV also has wireless Mouse and wireless Keyboard support when you
plug the receiver into the USB port on the TV.

SMART TV Android 4.2 Launcher Introduction
1 – Add to home screen. (Add apps to the home page)
2 – All Apps
3 – Change Wallpaper
4 – Search
5 – Settings
6 – Mass Storage (USB/SD/TF)
7 – Network (Wireless/WLAN)
8 – Source Window (TV/DTV/ATV/AV/HDMI/Y b r/VGA)
9 – Application at home page.
10 – Search
11 – HOME page
12/13/14 – Other pages

2. NETWORK CONNECTION (Wired/Wireless/ OE/WLAN H )
The instant networ page gives you quic and easy access to information via
the internet.
CABLE NETWORK

WIRELESS NETWORK

OE
PPPOE is point-to-point protocol over ethernet. For detailed operations
please contact your Internet Service Provider.
WLAN H (Hotspot)

3. DLNA
DLNA is the Digital Living Networ Alliance, which lets you enjoy your music,
photos and videos anywhere, anytime.
Note: 1 – Make sure your devices ( C, Smartphone, i ad etc..) have a
DLNA compatible program installed.
2 – Ensure your devices and the TV is in the same local area
network.
3 – Share the video/music/picture on your devices via DLNA.
O ERATION

4. HOME SHARE
Easily browse the internet or receive data from your home smart devices.
Your PC, NAS, Router with USB together with your TV creates a whole new
home entertainment centre.
To enjoy Home Share, you need to access the internet first. Please refer to
wireless connection information to connect to your networ .
Operation

5. MHL
MHL is Mobile High-Definition Lin . It utilizes established connectors and
features a single cable with a 5-pin interface. It supports 1080p HD video and
digital audio, and simultaneously provides power to the mobile device. It
also enables the TV remote control to control the mobile phone and access
its contents.
NOTE: MHL cable and a portable device that supports MHL is required
for this function. MHL is only available for HDMI1 mode.
Operation
6. A LICATIONS INSTALLATION
Note: You can download applications from the Google lay Store or
from other online stores directly if your TV has these stores installed, or
you can install applications from USB/SD/TF which contains the
suitable .apk software.
For USB/SD/TF installation:

7. GOOGLE LAY STORE
The Google Play Store is an online store for Google by Android devices. You
can select your favourite from 450,000+ apps, millions of songs and boo s,
plus thousands of movies.
Note: Some applications you can download from the Google lay Store
may not be compatible with this TV. lease check that the application is
compatible with the TV. We suggest that you are best to install
applications from the local app store.
8. USB 3.0
The newly upgraded USB 3.0 brings ultra-high bandwidth and high-speed
transmission of data. The USB3 interface on the TV is for USB 3.0 usage.