Kohler CARAFE 18866T-B User manual

1230974-2A-C 1
BEFORE YOU BEGIN
All information is based on the latest product information available at the time of publication. Kohler Co. reserves
the right to make changes in product characteristics, packaging, or availability at any time without notice.
Please leave these instructions for the consumer. They contain important information.
NOTES:
1. Flush the water supply pipes thoroughly to remove debris.
2. For the first time use filtered water, turn the handle on the furthest to remove debris in pipes and the filter until
the water is clear and clean.
3. To ensure the faucet running inorder, the static water pressure must be between 1.72bar and 6.89bar.
4. Please refer to the filter instruction for the application detail.
HANDLE OPERATION
Right handle control hot，cold and mixed water. Lift it gently, turn clockwise for hot water, counter-clockwise for
cold water.
Left handle control the filtered water. It opens with one-quarter turn counter-clockwise, closes with one-quarter
turn clockwise.
1230974-2A-C 4
INSTALLATION INSTRUCTIONS
18866T-B Kitchen Faucet18866T-B Kitchen Faucet
CARAFECARAFE
ROUGH-IN DIMENSIONS
SERVICE PARTS
**Color code must be specified when ordering
156
81
318
150
G1/2˝
50Max.
Ø34~Ø38
245372
196
24º
G1/2˝
870944
1229465
3008150
1067553
3002513**
3002527**
833438
834705
CP:834791**
VS:1035121**
834792
1066125
3002512
871363
871568
870858
834460
834705**
3002529
3004460
3002510
22352
3002530 831587
871306
1128531
831587
835696
871633
870487
834706
1229464
1229466**
1229466**
835696
3014047 830316
3002511
871568
3002509**
864943
871132
834705** 3002532
3013706
3002514**

1230974-2A-C 2 1230974-2A-C 3
INSTALLATION
How to Install the Faucet
Slide washer(1) over the hoses and into the groove of the body
assembly. Insert the flexible supply hoses into the hole of the sink, place
washers(3、4) and thread the ring(5) onto the shank(2) from the
underside of the sink. Position the faucet. Tighten the two screws(6) to
secure the faucet.
INSTALLATION CHECKOUT
CLEANING INSTRUCTIONS
All Finishes: Clean the finish with mild soap and warm water. Wipe entire surface completely dry with clean soft
cloth. Many cleaners may contain chemicals, such as ammonia, chlorine, toilet cleaner etc, which could adversely
affect the finish and are not recommended for cleaning.
Do not use abrasive cleaners or solvents on Kohler faucets and fittings.
Ensure that all coupling nuts are tight. Ensure that the handles are in the off position.
Turn on the main water supply and drain, and check for leaks. Repair as needed.
How to Install the Inlet (Way 1)
If have concentrated filtered water, connect the hose with red round to hot water supply, the hose with blue round
to cold water supply, and another hose without mark with filtered water supply.
How to Install the Inlet (Way 2)
If have no concentrated filtered water, please use the Kohler 3002786
filter and 1177296 connection assembly.
Connect the two hoses(7) and connectors(8) of connection assembly
(1177296) to the filter’s(3002786) inlet and outlet.
Remove connectors(9) and washers(10) from both the hose without mark
and the hose with blue round.
Connect the hose without mark to the outlet connector of the filter.
Use the supply tee(11) to connect and tighten the filter inlet to the hose
with blue round, connect the cold water supply to another end of the tee.
Connect the hose with red round to hot water supply.
1
2
5
6
3
4
6
Filter
3002786
7
Inlet
Outlet
8
8
10
9
Hose, red
Hose, blue
Connect
hot water
Connect
cold water
11
Inlet
Outlet
"LEAD FREE" is marked on the back of the faucet signifying its compliance with the United States AB1953