Kolpin Outdoors Rhino Grip XLR Instruction sheet

1
© 2020 Kolpin Outdoors Inc. REV 00
Rhino Grip XLR - Handlebar & Rack
Product Instructions | Part No: 21556
Kolpin Outdoors, Inc. | 9955 59th Ave N | Plymouth, MN 55442
[phone] or [phone] | kolpin.com | customerservi[email protected]
1
Item Qty Part Description Spare P/N
12Overmolded Grip Arm - A -
22Overmolded Grip Arm - B -
32Thumb Screw -
42M8 - 1.25 Locknut -
54Pivot -
62Mounting Base -
72Mounting Clamp -
84M6 x 35mm Socket Head Cap Screw -
94M6 - 1.00 Locknut -
10 2Rubber Strap 21591
11 2Rubber Pad (NOT SHOWN) -
3
Before you begin, read these instructions and check to be sure all parts and tools are accounted for. Please retain these
instructions for future reference and part ordering information. Note: If any hardware is missing, do not return to the store.
Call us to help, toll free at 1-877-956-5746.
4
2
5
67
89
10

2
© 2020 Kolpin Outdoors Inc. REV 00
Use and Care Information:
• Check the accessory mounts frequently and retighten if necessary.
• Replace this accessory with a new one if it is damaged or discolored excessively.
• When this accessory becomes dirty, rinse thoroughly with cool water to remove loose dirt, then wipe with a clean cloth or sponge.
• Never use petroleum solvents such as gasoline, thinner, benzene, acid or alkaline cleaners.
• Its recommended to keep out of direct sunlight exposure during long periods of time.
For additional assistance, please contact Kolpin customer service department at [phone] or [phone]
or email [email protected]
One Year Limited Warranty
For the period of one (1) year from the purchase date, Kolpin will replace for the original purchaser, free of charge, any part or parts
found upon examination by Kolpin to be defective in material, workmanship, or both.
All transportation costs incurred submitting product to Kolpin for warranty consideration must be borne by the purchaser. If Kolpin
determines that the product must be returned to the factory for credit, please call 1-877-956-5746 for a Return Merchandise Authori-
zation (RMA) number and shipping instructions.
This warranty does not apply to parts that have been damaged by accident, alteration, abuse, improper maintenance, normal wear, or
other causes beyond the manufacturer’s control. In order to protect you and your ATV, certain parts of the accessory system and/or
hardware are designed to fail when the equipment is over-stressed. Parts that are lost due to loosening and improper maintenance are
not covered under warranty. This warranty does not cover removal or reinstallation labor fees of the accessory system and related
components. Most hardware is general in nature and is easily obtained locally. Be sure to replace with minimum metric class 8.8 specification.
Mounting Instructions:
1. The Grip Arms [Items 1 & 2] and Pivots [Item 5] can be removed from the Mounting Base [Item 6] during initial install, if desired.
2. Wrap the Rubber Pad [Item 11] around the Handlebar or Rack
where the Rhino Grip will be mounted.
3. Install the Mounting Base [Item 6] and Mounting Clamp [Item 7]
over the Rubber Pad [Item 11].
4. Insert the M6 x 35mm Socket Head Cap Screws [Item 8], and
M6 - 1.00 Locknuts [Item 9].
Note: The Screws and Locknuts can be inserted from ei-
ther side of the Mounting Base.
5. Check for proper clearance of vehicle controls and assure
Rhino Grips are in a safe position, even if they become loose.
6. Tighten the hardware evenly.
Grip Adjustment Instructions:
1. Remove the Thumb Screw [Item 3], Arms [Items 1 & 2], and Pivots [Item 5].
2. Re-assemble in desired position and tighten Thumb Screw securely.
11
9
87
6
Handlebar
or
Rack