Komatsu DASH 10 User manual

MULTI-COLORMONITORQUICKREFERENCESHEET
PEN00555‑01
This sheet is not a substitute for the Operation and Maintenance Man-
ual. Always read the Operation and Maintenance Manual thoroughly and
make sure that you understand the content before reading this sheet.
WARNING
Normal display
CAUTION
If the monitor gives a warning display, check the displayed location as soon as possible and carry out the necessary maintenance.
The monitor display does not guarantee the condition of the machine. Do not rely only on the monitor display for maintenance and checks of the
machine; always carry out visual checks.
Displayed only when function is
selected or display condition is met
Switching the working
mode button, the screen
will be changed as below
Hydraulic oil flow settings for a breaker or a
crusher will be done at
"Attachment" in the "user menu".
(for details, see the Operation and Mainte-
nance Manual) (*1)
Auto-deceleration
ECO gauge
Travel speed
Fuel gauge
Hydraulic oil
temperature
gauge
Working mode
Travel speed selector switch
Lo Mi Hi
Window washer and
wiper operation switch
Wiper switch
Off intermittent continuous
Service meter, Clock
Fuel consumption
gauge
Engine preheating or
One-touch power max.
Wiper
ON: Continuous
INT: Intermittent
Swing lock
Engine coolant
temperature
gauge
Seat belt
KDPF regeneration or
KDPF regeneration
disable
Air conditioner
Function switches
Auto-deceleration switch
Buzzer cancel switch
Working mode selector switch
P E L B (ATT/P ATT/E)
430 min
430 min
ATTACHMENT1
ATTACHMENT1
430 min
430 min
ATTACHMENT1
ATTACHMENT1
180 min
180 min
BRAKER1
BRAKER1
Lifting Mode
Lifting Mode
Economy Mode
Economy Mode
Power Mode
Power Mode
Working Mode
Working Mode
DASH10
Message
Engine stop
Air conditioner control
switches
Guidance icon

SYMBOL TABLE
Replace pre fuel filter Replace hydraulic oil filter Replace hydraulic tank breather element Check damper case oil level, add oil Change oil in hydraulic tank KCCV filter change KDPF filter cleaning
500h
1000h
500h
1000h 2000h 1000h 5000h 2000h 4500h
Maintenance item
Standard
replacement
interval
Replace main fuel filter
1000h
Replace engine oil filter
500h
Change engine oil
500h
Fuel doser cleaning
4500h
Power mode Economy mode Lifting mode Breaker mode with attachment piping Attachment mode (Power) (with attachment piping)
Working mode
Attachment mode (Economy) (with attachment piping)
Setting of high-efficiency and powerful operation Setting of low-cost operation with less fuel consumption Setting of optimum work equipment speed for the work Setting of preset optimum flow rate (see reverse page *1) Setting of preset flow rate optimum for high-efficiency and powerful operation (see reverse page *1) Setting of preset flow rate optimum for operation with less fuel consumption (see reverse page *1)
There is unread message (Green) There is message need to reply (Blue) Air conditioner Intermittent wiper Continuous wiper Swing lock Engine preheating One-touch Power max
Auto-deceleration Travel Low speed Travel Mid speed Travel High speed
Indicator
Seat belt KDPF regeneration disable KDPF regeneration Engine stop
Switching to video screen Switching clock and service meter
User menu
Move to next page Move to previous page
Move to next item Move to previous item
Back Confirmation Move to left item Move to right item
Guidance icon
Engine coolant temperature overheated Hydraulic oil temperature overheated
Abnormal drop in coolant level Insufficient battery charge Filled air cleaner with dust Abnormal drop in engine oil pressure Abnormal drop in engine oil level Filled water separator with water
Abnormal in general electric system Abnormal in hydraulic system Abnormal in KDPF Soot sedimentation in KDPF Abnormal in engine Abnormal in air conditioner
Caution (Warning)
Action level Displays the severity of abnormality having occurred in the machine. Refer to the following table and take required remedy. Check error list by pressing F5 and then call your Komatsu distributor.
Action level
Severity
Stop the engine immediately, and then perform inspection and maintenance. Stop the work, move the machine to a safe place, stop the engine, and then perform inspection and maintenance. Stop the work and run the engine at medium speed with no load or stop it. Operation of the machine is allowed for though some functions may be restricted. After finishing the work, perform inspection and maintenance.
Remedy
High
Low
Maintenance time is close
Yellow
Yellow
Time for maintenance
Red
Red
If or display appears on the screen, the maintenance time for some item is close. Press (F6) switch
Remain
Interval
Interval Remain
Remain
Maintenance
Maintenance
500
500
h
h
360
360
h
h
Fuel Pre Filter Change
Fuel Pre Filter Change
1000
1000
h
h
360
360
h
h
Hyd Oil Filter Change
Hyd Oil Filter Change
500
500
h
h
10
10
h
h
Engien Oil Filter Change
Engine Oil Filter Change
1000
1000
h
h
360
360
h
h
Fuel Main Filter Change
Fuel Main Filter Change
500
500
h
h
0
0
h
h
Engine Oil Change
Engine Oil Change
Occurred error list display
Change swing machinery case oil Change final drive case oil