komodo KDBEDDBAIRA User manual

Important Information
•Do not let the inflatable bed come into contact with sharp, pointed objects.
•Fill bed with cold air only. Never use a hair dryer to inflate the bed, as this may cause
melting.
•Do not over inflate. An air mattress bursting can cause serious injuries. Inflate the mattress
until most of the wrinkles in the material are gone and the bed feels firm to the touch.
Caution
•Air temperature and weather do affect the air pressure in inflatable products. In cold
weather, the airbed will lose some pressure due to the fact that the air will contract. If this
occurs, you may wish to add a little more air to improve the airbed performance.
owever, in hot weather the air will expand. You should let some air out of the airbed to
prevent the airbed from failing due to overpressure. You should avoid exposing the airbed
to extreme temperatures (either hot or cold).
To Open/Close Valve
To Close Valve
Quick tart Guide
KDBEDDBAIRA
KOMODO Double Air Bed with 12V Pump

Inflation Instructions
To inflate using the pump unit: be sure to plug the pump's 12V adapter into your car's 12V output
plug and turn the key to supply power prior to use.
•To begin inflation, open the external cap
and pull firmly on the lanyard to extend
it out. This will open the internal yellow
seal.
•Attach the middle of the three available
nozzles to the output nozzle of the pump
and turn pump on.
•When fully inflated, seal valve by
pushing in with the pump nozzle. This
will seal the internal yellow stopper,
which will keep air from escaping while
you close the cap.
•Fully remove the pump and close the
external stopper. The valve should
appear depressed into itself.
Note: Pump and nozzle are for illustrative purposes. Actual pump and nozzle may differ in appearance but functionality will remain.
Deflation Instructions
To deflate using the pump unit:
•Remove the adapter nozzle from the
inflation end and attach to the opposite
“deflation” side of the pump. Repeat the
same steps as for inflation. This will
draw the air out of the airbed quickly.
•To deflate, open the external stopper and
pull out to extend, allowing the air to
escape. When fully deflated, close the
stopper.
Note: Pump and nozzle are for illustrative purposes. Actual pump and nozzle may differ in appearance but functionality will remain.

DO NOT OVER INFLATE
NEVER USE A AIR
DRYER TO INFLATE
WARNING: Read all instructions before use to avoid injury or death!
Not for use by children 3 years old or younger, or people will limited mobility.
They may suffocate in a face down position or become trapped and suffocate in the gap between
the furniture and the adjacent furniture or wall. If the airbed is under inflated during use, this risk
of suffocation increases.
Do not let young children sleep on this airbed until the are mature enough to sleep in an
adult bed.
Young children can suffocate in adult beds (including airbeds), particularly when sleeping with
another person. Ask your paediatrician for specific recommendations for your child.
Adult supervision is required for inflation and deflation.
This airbed can melt or burn.
Keep away from open flames, heaters and other hot objects. Do not smoke on or
near the airbed.
This airbed is not for use in water.
It is not a life saving device, personal flotation device or a water toy.
This airbed is not a toy. Do not stand, walk, jump or play on the airbed.
This can result in serious injury or damage to the airbed.