Kona Labs MeterDog User manual
Install the MeterDog™ in close proximity to the
LevelSmart Valve Controller in order for
connections to be made.
2
4
3
MeterDog™ + LevelSmart™
Quick Start
Connect MeterDog™ and LevelSmart™ through
the four pin connectors .
Place the magnet as shown on the MeterDog. In
30 seconds the RED eye flash will turn GREEN.
Remove magnet. Eye alternates RED & GREEN
Place the magnet as shown.
If the eye flashes GREEN the unit is ACTIVE.
Remove the magnet before 5 flashes.
KonaLabs.com
1
HOW TO USE
The LevelSmart integrates with MeterDog™ to bring water information to your
fingertips. Use the LevelSmart App to keep track of water level, fill requests, and
water temperature
Follow the instructions provided in the on-boarding email to access your customer
account to manage settings and alerts.
If you do not receive your on-boarding email please call (808) 345-0430 or email
info@KonaLabs.com
Troubleshooting MeterDog™
KonaLabs.com
Check Activation
Place magnet on MeterDog™ for less than 5 seconds. Green=active and Red=Inactive.
Continuous Flashing
Move the antenna to a better position to improve cellular reception if eye flashes for more
than three minutes.
Flashing Stopped
The eye will stop flashing once all processes have completed.
Note
Do not place magnet on the MeterDog™ until eye stops flashing.
Table of contents
