KONDATOR Docky - 4 User manual

User manual
Docky - 4 Power outlets 935-B400
GENERAL NOTES
Before installation, all measurements and conditions must be verified on site.
Neither KONDATOR nor any of its distributors can be held liable for product malfunction or other defects as a result of inproper installation.
20211119
5Once the two DOCKY products are firmly secured, attach
the connection cover.
6If an extention is required between
two DOCKY products, use
extension cables:
935-BF10 - 1m
935-BF20 - 2m
935-BF30 - 3m
935-BF50 - 5m
(not included)
7If multiple DOCKY products will be
connected in parallel or
sequence, use splitter:
937-BTK12 - 1 GST18i3 Male to 2 Female
937-BTK13 - 1 GST18i3 Male to 3 Female
(not included)
User Manual

CONTENT
1 × 935-B400
DOCKY 4 Power outlets
2 × Mounting plates
4 × Wood screws
1 × Connection cover
1Slide mounting plate into grooves
until firmly in place. 4If multiple DOCKY products in abutted serial connection is desired, line up
the GST18i3 male and female connector, and press them together firmly until a
distinct click is heard.
User Manual User Manual
2Attach the product to the desired
surface with the included screws.
3Attach GST18i3 power cable (not included) male
connector to DOCKY female connector and power
plug to a wall socket.