
English
English
Understand the lights on iS Touch
1.The first LED blinks twice in blue; Power switched on/
resume from sleeping mode.
2.The first LED in blue (not blinking):Ready to use/battery is
not empty.
3.The first LED blinks in red: Low battery.
4.The first LED in red (not blinking): Charging mode.
5.The first LED blinks in red and blue: Mouse in pairing.
6.The scroll section blink in blue: 20 minutes to sleeping mode.
iS Touch will be switched into “sleeping” mode to save its power if there is no
movement of it for 10 minutes. You will see the scroll section blinking in blue.
That means iS Touch will sleep after 20 minutes. To wake up, just move the iS
Touch and wait for few seconds for re-establishing Bluetooth connection.
Charging the battery
When you see the first light of the scroll section starting blinking in red, it
indicates that there is not much power left. To charge the iS Touch, you
should remove the rubber cap in the USB port then connect the iS Touch
with the USB cable to your computer. Once the light turns in blue which
means the charging is done, you can unplug out the USB cable and use
again.
During the charging, you still can use iS Touch as the normal mouse.
The charging time is approximately 8 hours for first time charging.
Sleeping mode