konf emLas User manual

110

6
5
4
3
1
Getting started
Using emLas
Tips and troubleshooting
Learning more,
service and support
Safety and cleaning

1 Install the battery pack
Install the rechargeable batteries with the right position in the battery pack.
Charge the batteries 2
If indication of LED or indication of LED, connect the battery charger.no red
During the charging process, the is also ready to be used.
emLas
Charging time for the original batteries supplied is about 12 hours.
Cordless operation 3
If the indication of LED, you can disconnect the battery charger for cordlessgreen
operation.
Getting started
Read on to find out how to get started low level laser therapy (LLLT) with .emLas

STEP ACTION PUSH
Power ON
Start
Emergency
Stop
Time Setting
2
3Flash
1
LED Display
K
n
f
K
n
f
K
n
f
K
n
f
+
Decrease Increase
> 5 Seconds
Last treatment time
Opt.
or
Operation
4Operation steps and LED display

Specifications
47Hz ~ 63Hz
Max. 0.5A (115V AC), 0.25A (230V AC)
Operation Environment
Power Input Voltage
Power Input Frequency
Power Input Current
0~50°C(32 ~ 122 °F); 10 ~ 95%RH (Non-condensing)
90V AC ~ 264V AC
Power Supply Rechargeable Li-ion Battery
Battery Charger / AC Power Supply Unit
emLas is used as the controller, combined with the laser accessories for the treatment of
diseases and conditions, follow the recommended dosage and treatment time to get the
best efficacy. You can also find new information about using on the web
emLas
www.konftec.com.
Using emLas

My won't turn onemLas
Make sure the batteries are in the right direction.
If that doesn't work, connect the power adaptor to charge the batteries.
If that doesn't work, check the connection from to the power adapter andemLas
connect the adapter to a working electrical outlet. The LED indication should be red.
If that doesn't work, contact your local sales office.
My indicate light after charging more than 18 hoursemLas RED
Charging time for the original batteries supplied is about 12 hours.
Replace rechargeable batteries with new ones.all
Charging time for new batteries may vary with the capacity and quality.
Tips and troubleshooting
Read on for advice about using and troubleshooting .emLas

Learning more, service, and support
There is a wealth of information about using emLas on the web.
For the latest information on emLas service and support information go to
www.konftec.com.
Obtaining warranty service
If the product appears to be damaged or does not function properly, please follow the
advice in this booklet, and the online resources. If the unit still does not function, go to
www.konftec.com for instructions on how to obtain warranty service.

Important safety instructions
When setting up and using your , remember the following:emLas
Read user’s guide carefully before you plug your Power Adapter into a power outlet.emLas
Keep user’s guide handy for reference by you and others.
Follow all instructions and warnings dealing with your .
emLas
Electrical equipment may be hazardous if misused.Warning:
Operation of this device, must always be supervised by an adult. Do not allow children
access to the interior of any electrical product and do not permit them to handle any cables.
Warning: Laser beam
Avoid direct eye exposure to the laser beam.
Because some lasers emit invisible infrared light, the usage of laser part in the area of
emLas
the face and around the eyes must proceed with appropriate care and caution.
Invisible infrared laser light penetrating the eye may cause serious harm after extended
exposure. Therefore, the use of the optional laser safety goggles is advised.
Safety and cleaning
Read on to learn about using safely and cleaning . emLas emLas

Using the power adapter
Use only the power adapter that came with your . Adapters for other electronic
emLas
devices may look similar, but they may damage your .emLas
The only way to shut off power completely to your power adapter is to disconnect it from
the power source.
When connecting or disconnecting your power adapter, always hold the power adapter
by its sides. Keep fingers away from the metal part of the plug.
Before connecting your to the power adapter, make sure there are no foreign
emLas
objects inside the adapter's port.
The power adapter for your is a high-voltage component and should not be
emLas
opened for any reason, even when the is off. If the power adapter needsemLas
service,see “Learning more, service, and support.”
About operating and storage temperatures
Operate your in a place where the temperature is always between 0 and 50º C
emLas
(32 to 122º F).
Store your in a place where the temperature is always between -20 and 85º C
emLas
(-4 to 185º F).
When you are using your , it is normal for the bottom of the power adaptor case to
emLas
get warm.
50
0

Avoid wet locations
To reduce the chance of shock or injury, do not use your in or near water orWarning emLas
wet locations.
Keep your and power adapter away from sources of liquids, such as drinks, wash
emLas
basins, bathtubs, shower stalls, and so on.
Protect your and the power adapter from direct sunlight and rain or other moisture.
emLas
Take care not to spill any food or liquid on or its power adapter. If you do, unplugemLas
emLas before cleaning up the spill.
Depending on what you spilled and how much of it got into your equipment, you may have to
send your equipment to Konftec for service. See “Learning more, service, and support.”
Do not make repairs yourself
Except the battery cover, do not attempt to open your or power adapter,Warning emLas
disassemble it. You run the risk of electric shock and voiding the limited warranty. No user-
serviceable parts are inside. For service, see “Learning more, service, and support.”
Cleaning
Follow these general rules when cleaning the outside of your and its components:emLas
Make sure your power adaptor of is unplugged.emLas
Use a damp, soft, lint-free cloth. Avoid getting moisture in openings.
Don't use aerosol sprays, solvents or abrasives.
Apply alcohol to clean the earplug after usage.
About handling
Your may be damaged by improper storage or handling.
emLas
Be careful not to drop you when treating or transporting the device.emLas

www.konftec.com
© 2019 Konftec Corporation. All rights reserved.
Konf, the Konf logo and emLas
are trademarks of Konftec Corporation,
registered in Taiwan and
other countries.
UEM_91201E
Konftec Corporation
12F-7, No.77, Sintai 5th Rd., Sec. 1,
Sijhih District, New Taipei City 221
Taiwan