Konica Minolta Digital Revio KD-300Z User manual

Thank you for purchasing this Konica product.
Digital Revio KD-300Z is a digital camera equipped with a 3.34 mega-
pixel CCD for high quality digital photography.
Before using the camera, please read this User’s Manual carefully and
follow its instructions to assure proper use.
Wir danken Ihnen für das Vertrauen, das Sie Konica mit dem Kauf
dieses Produkts bewiesen haben.
Bei der Digital Revio KD-300Z handelt es sich um eine Digitalkamera,
deren CCD-Element mit 3,34 Mio. Pixeln arbeitet, so dass
Digitalaufnahmen von höchster Qualität erzielt werden.
Bitte lesen Sie diese Anleitung vor Inbetriebnahme der Kamera
aufmerksam durch, damit Sie alle Funktionen optimal nutzen können,
und befolgen Sie alle Anweisungen, um einen fehlerfreien Betrieb zu
gewährleisten.
GB/
D
名称未設定-3 7/6/01, 6:19 PMPage 1 AdobePageMaker6.5J/PPC

32
Contents
Loading and Recharging the
Battery Pack.............................. 9
Basic Preparations
Camera Basics Using the LCD Monitor when
Shooting .................................. 13 Recording Moving Images ...... 17
White Balance ......................... 31
Aperture-Priority
Photography............................ 34
Using Manual Focus ............... 35
Long Exposure Mode.............. 36
Increasing Exposure Sensitivity
to 2x, 4x................................... 38
Selecting the Metering
Mode........................................ 39
Other Functions....................... 41
Selecting Flash Mode ............. 22
Macro and Landscape
Photography............................ 24
Using the Self-timer ................ 26
Setting Image Quality.............. 27
Exposure Compensation......... 29
Using Color Mode for B&W
and Sepia Images ................... 30
Camera Functions
Multiple Image Display
(Index Display) ......................... 47
Erasure Prevention .................. 48
Erasing Individual Images ....... 49
Erasing All Images................... 50
“Thumbnail” Picture Review in
Forward/Reverse Direction ..... 45
Closeup Image Playback ........ 45
Displaying Exposure
Information .............................. 46
Advanced Image Playback
and Delete Functions
Focus Mode ............................. 62
Mode Lock ON/OFF................ 63
Digital Zoom ON/OFF ............. 65
Selecting the Display Language ..... 66
Selecting the Video
Output Mode ........................... 67
Creating a New Folder on the
Memory Card........................... 68
Returning Settings to their
Default Values.......................... 70
Formatting Memory Cards ........ 57
Turning the Electronic Tone
ON/OFF ................................... 59
Setting Auto Power-Off ........... 60
Selecting the Automatic
Camera Setup Options
Sending Images to a Printer ..... 74Transferring Images to a
Computer................................. 73
Transferring Images to Other
Devices
Image Playback Basics Displaying Images on the LCD
Monitor .................................... 42
Handling Precautions .............. 77
Troubleshooting....................... 83
Other Information
LCD Monitor Operations ......... 76
Caution and Warning Symbols .. 77
Loading and Removing Memory
Cards ....................................... 10 Setting the Date ...................... 12
Playing Movies ........................ 43
Rotating Images ...................... 52
Automatic Playback ................ 53
Digital Print Order Format
(DPOF) Setting......................... 54
Names of Parts.......................... 4
Using the Optical
Viewfinder................................ 18
Specifications.......................... 87
*MultiMedia Card is a registered trademark of Infineon Technologies AG
(Germany), licensed to MMCA (MultiMediaCard Association).
Please purchase “Secure Digital (SD) Memory Cards” or “Multi-Media
Cards*” (MMC) for use with this camera. These cards are referred to in
these User’s Instructions as “Memory Cards.”
名称未設定-3 7/6/01, 6:20 PMPage 2-3 AdobePageMaker6.5J/PPC

54
<Operating Controls>
“” Macro/
Landscape mode button
(page 24)
Use this button to select Macro
or Landscape mode.
“” Flash mode button
(page 22)
Use this button to select
flash mode.
Mode select lever
Use this lever to switch between
record, playback, and setup
modes.
“@” “#” “%” “fi” buttons
Use to select items on each
menu, and to select forward/
reverse playback modes.
“W” “T” Zoom buttons
Use to control the lens’s zoom
setting (wide-angle to telephoto)
when recording, and to enlarge
images during playback.
“” button
Use this button to adjust
LCD screen brightness and
to set items on menus.
“MENU” button
Use this button to display or
turn off the menus in recording
or playback mode.
“DISPLAY” button
In the recording mode ( ), use
this button to turn the LCD
monitor ON/OFF.
“POWER” button
Use to turn camera
power ON/OFF.
Shutter release button
<Displays and Indicators>
Self-timer LED (red)
This LED flashes when using self-
timer photography, and it lights
steadily when recording moving
images or playback and when using
the setup mode.
Caution LED (red)
This LED is used to signal the charge status of
the lithium ion battery, the charging status of the
electronic flash, and the camera shake warning.
During
Recording
Other
Flash charging
Camera shake
warning
During battery
charging
Battery charging error
Flashes (about
2 times/sec)
Flashes (about
4 times/sec)
Lights steadily
Flashes
Standby LED (green)
This LED is used to indicate the in-
focus status and the completion of
battery recharging.
Card access LED (orange)
This LED flashes to indicate that the
camera is currently writing data to
the memory card.
¶Never open need to standardize
to cover or door, or remove the
memory card when this LED is
flashing.
LCD monitor
Functions as viewfinder
during recording, and displays
images and menu information
during the playback and setup
modes.
Names of Parts
名称未設定-3 7/6/01, 6:20 PMPage 4-5 AdobePageMaker6.5J/PPC

76
<Other Parts>
Flash
Optical viewfinder (page 18)
Light sensor
Lens and lens cover
Connector cover
Video output connector (page 16)
Power supply input socket (page 9)
Strap lug (page 11)
Battery pack
compartment
and cover
(page 9)
Memory card door
(page 10)
Tripod socket
Memory card
door release
<LCD Monitor Information>
Macro/Landscape mode (page 24)
Flash mode (page 22)
Metering mode (page 39)
Focus mark (lights when focus is set)
Color mode (page 30) / White balance
mode (page 31)
Image quality (page 27)
Number of images recordable
Auto-Exposure mode (page 34)
Sensitivity (page 38)
Long time exposure (page 36) /
Exposure compensation value
(page 29)
Self-timer (page 26): Displays the
number of seconds remaining until the
self-timer releases the shutter.
Digital zoom (page 15)
Focusing scale (displayed only
during manual focus) (page 35)
Menu display during recording
Data (page 12): Automatically displayed
for 3 seconds after power is turned ON.
Battery indicator (page 9): Indicates
remaining battery capacity
名称未設定-3 7/6/01, 6:20 PMPage 6-7 AdobePageMaker6.5J/PPC

9
Loading and Recharging the Battery Pack
Open the battery compartment
cover and insert the supplied
battery pack.
¶Be sure to insert the battery pack in
the correct direction; the camera will
not operate if the battery pack is
loaded incorrectly.
<Recharging Time>
Connect the AC adapter to the
camera and plug it into a household
outlet to begin recharging.
<Recharging Status>
Charge the battery pack in accordance with the battery indicator status
shown on the LCD monitor.
Low
warning Charge
required
Full recharging requires
approximately 5 hours.
During recharging, the caution LED will
light steadily. When recharging is
completed, the caution LED will go out
and the standby LED will light.
Basic
Preparations
2
1
Standby LED Caution LED
名称未設定-7 2001.7.6, 6:03 PMPage 8-9 AdobePageMaker6.5J/PPC

1110
LOCK
SD Memory Cards are provided with
a write-protect switch. When this
switch is moved downward, further
recording on the card is disabled, to
protect any images and data already
on the card. When in this status, no
further images can be recorded on
the card, and images already on the
card cannot be erased.
The LCD monitor will display
“WRITE PROTECT”.
Loading and Removing Memory Cards
<Loading>
Slide the memory card door release
to open the card door.
<Removal>
Slide the memory card door release
to open the card door, and pull out
the memory card.
Close the memory card door.
Insert the memory card.
¶Slide in the card until it stops with a
secure click.
¶Be careful to insert the memory card in
the correct direction.
¶ Press the edge of the memory card in
slightly before pulling out.
<Attaching the hand strap>
Attach the supplied hand strap as shown.
Write Protect Switch
(SD Memory Cards only)
2
1
3
名称未設定-7 2001.7.6, 6:03 PMPage 10-11 AdobePageMaker6.5J/PPC

12
To confirm the new setting data,
press the “ ” button.
This completes the
operation, and the LCD
monitor will return to the
menu screen.
Setting the Date
Follow these instructions to set the date, time, and calendar display mode:
<Operation>
Set the mode select lever to “ ”.
Press the “#” button.
The monitor will show the
date/time setting display.
Press the “@” and “#”
buttons to change the
setting item, and the “%”
and “fi” buttons to change
the numerical values.
To cancel the setting operation: Press
the “MENU” button; the setting contents
will revert to those before the setting
operation was begun.
2
1
3
名称未設定-7 2001.7.6, 6:03 PMPage 12 AdobePageMaker6.5J/PPC

13
1. Set the mode select lever to
“” , then press the power
ON/OFF button to turn on
camera’s power.
Use the LCD monitor to compose
your pictures when particularly
accurate composition is needed. The
image recorded will be the same as
that seen through the monitor.
Using the LCD Monitor
when Shooting
An electronic beep will be heard for
several seconds, followed by the
appearance of the LCD monitor.
Automatically displayed for
3 seconds, then turns off.
Camera
Basics
名称未設定-8 2001.7.6, 6:07 PMPage 13 AdobePageMaker6.5J/PPC

1514
2. Hold the camera steadily with
both hands as shown to avoid
camera shake.
“Beep”
“Beep,
beep”
The LCD monitor
will become
momentarily
dark, then the
2Press down further on the
shutter release button to take
the picture; recording of the
image begins when the
electronic beep sound.
<Hints for Holding the
Camera Steady>
Blurry pictures are most often
caused by camera shake. Find the
position and stance that is most
comfortable for you and allows you
to hold the camera steadily.
¶Rest the right index finger lightly
on the shutter release.
¶Take care that the flash and lens
are not covered by your hand or
fingers.
¶Press the shutter release button
gently, without grasping the
camera too tightly,
¶Use the left hand to support the
camera firmly.
¶Hold your elbows close to your
body and hold the camera
steadily.
4. Press the shutter release
button to take the picture
1Lightly depress the shutter
release button halfway (see
page 16) to begin focusing; the
focus mark will light and the
electronic beep will be heard
when focus is locked.
Card access LED
The magnification ratio is
displayed on the screen.
3. Compose your picture while
watching through the LCD
monitor.
Press the zoom buttons to range
between telephoto and wide-
angle lens settings, thus enlarging
or reducing the size of your
subject. Press the “T” button to
enlarge the subject, and the “W”
button to reduce the size of the
subject.
3The caution LED and card
access LED will flash while the
camera is writing image data to
the memory card.
WT WT
¶Since electronic circuitry is used
to increase the magnification
ratio, the results cannot be seen
in the optical viewfinder. Always
be sure the LCD monitor is
turned ON when using the digital
zoom function.
¶Digital zoom cannot be used
when the LCD monitor is not
turned ON.
¶Digital zoom also cannot be
used when image quality is set
to [T] or [ ]. If pictures are
taken with digital zoom when
image quality is set to [S] or [F],
actual image quality will be
equivalent to [N].
Caution LED
recorded image will be displayed.
<Use the Digital Zoom for
Even Greater Enlargements>
Press the “T” button until the
zoom function reaches the
maximum telephoto setting;
release your finger slightly,
then press the button again.
The digital zoom will further
enlarge the subject in three
steps (1.3x, 1.6x and 2x the
maximum optical zoom value).
名称未設定-8 2001.7.6, 6:07 PMPage 14-15 AdobePageMaker6.5J/PPC

1716
This function allows you to record
up to 15 seconds of simple movie
images. The monitor display during
movie recording is shown below:
1Press the “MENU” button.
2Select [ ], then press the
“” button to set for movie
recording [ ].
3Press the shutter release
button to begin recording;
fifteen seconds later the
recording will end
automatically.
This number
indicates the
remaining
number of
movies that
can be
recorded
<Shutter Release Button
Half-way Down>
When the shutter release button is
pressed down lightly, it will stops
part way in its travel. In this semi-
depressed position, the camera
automatically sets focus and
exposure. When the shutter release
button is pressed further down, the
shutter is released and the image is
recorded.
Fully depressed
<Other Uses>
The camera can be connected to a
television monitor to allow use of
the screen as a large viewfinder.
When connected to a television
monitor, the camera’s own built-in
LCD monitor turns off, and the
subject is displayed instead on the
television screen.
¶The camera’s built-in LCD
monitor turns off whenever a
video cable is connected to the
camera.
¶Use a standard video cable to
connect the camera to the
television.
<Precautions when Recording>
¶Wait until the caution LED has
stopped flashing before taking
your next photograph .
¶When the camera is in the “ ”
mode, setting the auto Power-
Save function allows the camera
to automatically enter the auto
power-off (“power-save”) mode if
left inactive for a set period of
time. From this “sleep” state, the
camera can be restored to its
normal shooting condition by
depressing the shutter button
halfway, or by pressing one of
the other function buttons. (For
details, see page 60).
¶Never open the memory card
door or remove a memory card
while the card access LED is
flashing, since the memory card
may be damaged and data lost.
Not pressed
Half-pressed
Recording Moving Images
<NOTE>
¶The optical zoom can be used,
but the digital zoom (page 15)
does not function during movie
recording.
¶To view movies on a computer,
installation of QuickTime 4.1 or
later version is required.
¶To stop recording before the 15
seconds has elapsed, press the
shutter release button again.
(each movie represents a maximum of
15 seconds of recording time).
名称未設定-8 2001.7.6, 6:07 PMPage 16-17 AdobePageMaker6.5J/PPC

1918
“Beep”
“Beep,
beep”
Card access LED
Caution LED
5. Press the shutter release
button to take the picture.
1Lightly depress the shutter
button halfway to begin
focusing; the focus mark will
light and the electronic beep
will be heard when focus is
locked.
Turning the LCD monitor off will
help conserve battery power.
Turning LCD monitor OFF (page 76)
1. Set the mode select lever to
“”, then press the
“POWER” button to turn power
ON.
2. Press the “DISPLAY” button to
turn off the LCD monitor.
3. Hold the camera steadily as
shown to prevent camera
shake.
¶See <Hints for Holding the Camera
Steady> on page 14.
Using the optical
viewfinder to compose
your picture.
4. Look through the optical
viewfinder while composing
your image.
Press the “T” button to enlarge
the subject, and the “W” button to
reduce the size of the subject.
<Precaution when using the
optical viewfinder>
When using the optical
viewfinder, take note of the
distance to your subject. As
distance to the subject
decreases, parallax (the
difference between what you
see in the viewfinder and the
actual image recorded through
the lens) increases. When
accurate subject composition
is required, use the LCD
monitor to take your pictures.
¶Parallax: see page 25.
Using the Optical Viewfinder
¶Your next picture can be taken
when the caution LED stops
flashing.
WT WT
2Press down further on the
shutter release button to take
the picture; recording of the
image begins when the
electronic beep sound.
3The caution LED and card
access LED will light while the
camera is writing image data to
the memory card.
名称未設定-8 2001.7.6, 6:07 PMPage 18-19 AdobePageMaker6.5J/PPC

MEMO
名称未設定-8 2001.7.6, 6:07 PMPage 20 AdobePageMaker6.5J/PPC

21
When shooting with the LCD monitor turned
OFF:
Note that the LCD monitor must be turned ON to set
functions or to confirm previous settings.
This section introduces various functions available during image
recording. Use them to enhance the range of your camera work.
Camera
Functions
名称未設定-9 2001.7.6, 6:08 PMPage 21 AdobePageMaker6.5J/PPC

2322
<Operation>
1Press the “ ” button to select
the desired flash mode.
2Press the shutter release
button to take the picture.
<NOTE>
¶If the caution LED flashes when
the shutter release button is
depressed halfway, it indicates
that a slow shutter speed will be
selected (low light conditions); in
this case, use of a tripod is
recommended to prevent
camera shake.
Selecting Flash Mode
<Flash Modes>
When the “ ” button is pressed, the display changes as follows:
*“Red-eye” Phenomenon: This phenomenon may occur when using flash to
photograph persons or pets under dark conditions. In some cases, the
flash reflects against the retinas of the subject’s eyes, causing the pupils to
appear red in the photograph.
In this mode, the flash fires regardless of
surrounding light conditions. This mode
provides fill-flash when shooting in a backlight
environment or under strong sunlight when
shadows are cast on the main subject.
In this mode the flash does not fire. This mode is
effective when shooting an evening sunset or to
preserve indoor mood.
The camera automatically determines lighting
conditions and switches between flash and
available-light exposure as needed.
<Usable Flash Range>
A variety of flash modes are available for different conditions.
Display
appearance
when the
“red-eye
reduction”
mode is
selected.
When sensitivity is normal
Camera
About 90 cm
Usable flash range
About 2.5 meters
About 2 meters
Zoom set at wide
Zoom set at telephoto
The flash fires twice to help reduce the
“red-eye” phenomenon*.
¶If the caution LED flashes when
the shutter release button is
depressed halfway, it indicates
that a slow shutter speed will be
selected (low light conditions); in
this case, use of a tripod is
recommended to prevent camera
shake.
[] Flash-off mode:
[] Fill-in flash mode:
[] Red-eye reduction
auto-flash mode:
[] Auto flash
mode (default):
名称未設定-9 2001.7.6, 6:08 PMPage 22-23 AdobePageMaker6.5J/PPC

2524
<Operation>
1Press the “ ” button
and select the desired mode.
Display
appearance
when the macro
mode is
selected.
2Press the shutter release
button to take the picture.
<NOTE>
When shooting with the optical
viewfinder (LCD monitor turned
OFF), if the macro mode [ ] is
selected, the LCD monitor will
automatically turn ON when the
shutter release button is depressed
halfway.
<Combined Modes>
When shooting in the macro
mode, pressing the “ ” button
will permit macro flash
photography.
Macro and Landscape Photography
Use the macro and landscape shooting modes when photographing
extremely close and distant subjects.
<Macro/Landscape Selection>
Camera
About 6 cm (zoom set at wide)
Macro range Normal photography
Landscape range
About 90 cm
Each time the “ ” button is pressed, the mode changes
alternately as follows:
Sharp images are produced when shooting
subjects between 6 cm and 90 cm (at wide-
angle setting) from the camera.
Sharp images are produced of
landscapes and other distant subjects.
Image actually
recorded by
camera
View through
optical
viewfinder
Since parallax occurs when using
the optical viewfinder for macro
photography, we recommend that
you use the LCD monitor to
compose your photographs when
shooting extreme closeups.
*Parallax refers to the difference
between what is seen in the
viewfinder and the actual image
recorded through the camera’s
taking lens.
Take care, however, since very
close subjects may receive
excessive exposure. In this
case, use the exposure
compensation function to
compensate the exposure.
[] Macro mode
[] Landscape mode
[No display] Normal mode
名称未設定-9 2001.7.6, 6:08 PMPage 24-25 AdobePageMaker6.5J/PPC

2726
<Operation>
1Press the “MENU” button.
2Press the “@” button to select
[].
Setting Image Quality (File Compression)
Use this function to change the amount of file compression and thus
image quality, and when shooting movies.
Quality Image Dimensions (Pixels) File Size
[N] Normal 1024 ×768 About 280 KB
[F] Fine 2048 ×1536 About 1 MB
[S] Super Fine 2048 ×1536 About 2 MB
[T] TIFF-RGB (no compression) 2048 ×1536 About 9.1 MB
[] Movie 320 ×240 (Maximum 15 seconds)
¶When TIFF-RGB [T] is selected, color mode cannot be used to select B/W or
Sepia.
¶Capacities are only given as general references. Actual file size will differ
depending on the color and other characteristics of the image photographed.
Using the Self-Timer
The self-timer is a convenient function when you wish to include
yourself in your pictures, or to avoid camera shake when shooting
closeups.
[]: The shutter is released ten seconds after pressing the shutter
release button. Use this setting when you need time to enter
the picture composition yourself.
[]:The shutter is released 2 seconds after pressing the shutter
release button. Use this setting with a tripod during macro
photography and during lengthy exposures to avoid camera
shake.
<Operation>
1Press the “MENU” button.
2Press the “@” button to select
[].
3Press the “ ”button and
select the desired self-timer
delay time [ ] or [ ].
4Press the “MENU” button to
turn off the MENU display.
5With camera on tripod,
compose your picture and
when ready, press the shutter
release button.
¶Follow the same procedure to return
to normal shooting mode.
Display
appearance
when 10-
second
delay is
selected.
3Press the “ ” button to select
the desired image quality or
movie mode.
4Press the “MENU” button to
turn off the menu display.
5Press the shutter release
button to take the picture.
Display
appearance
when [N]
(Normal)
mode is
selected.
名称未設定-9 2001.7.6, 6:08 PMPage 26-27 AdobePageMaker6.5J/PPC

2928
<General Guidelines for Selecting Image Quality>
For high image quality, select [S] or [F] compression; when taking pictures for
viewing on a television monitor, select [F] or [N], and when taking pictures
which will be used in small size on the Internet or other computer application,
use [N]. When images are to be enlarged, or when image quality is
particularly important, select [S] or the uncompressed [T] mode.
Remember that the uncompressed TIFF-RGB [T] mode results in very large
file sizes (approximately 9.1 MB), and requires high memory card capacity.
Exposure Compensation
<Operation>
1Press the “MENU” button.
2Press the “@” or “#” button
and select [ ], then press
the “ ” button to confirm the
selection.
3Press “%” or “fi” button to
select the desired amount of
exposure compensation, then
press the “ ” button to
confirm the selection.
Display
appearance
when +0.7
is selected.
This function provides a range of compensation for exposure.
Press the “%” button
to increase the
amount of exposure
(+), and the “fi”
button to decrease
exposure (–).
+2.0
⋅
⋅
⋅
+0.7
%fi
+0.3
%fi
±0.0
%fi
–0.3
%fi
–0.7
%fi
–1.0
⋅
⋅
⋅
–2.0
4Press the “MENU” button to
turn off the menu display.
5Press the shutter release
button to take the picture.
¶During flash photography, exposure
compensation is limited to the
range of ±1.0 step, regardless of
the value shown in the display.
名称未設定-9 2001.7.6, 6:09 PMPage 28-29 AdobePageMaker6.5J/PPC

3130
Using Color Mode for B&W and Sepia Images
In addition to the normal color picture mode, you can also take pictures
in black and white (B/W) or sepia tone (Sepia).
¶B/W and sepia picture modes cannot be selected when image quality is set
for uncompressed TIFF-RGB [T] format.
<Operation>
1Press the “MENU” button.
2Press the “#” button to select
[], then press the “ ”
button to confirm the selection.
3Select [COLOR MODE], then
press the “#” button.
4Press the “%” or “fi” button to
select either [SEPIA] or [B/W]
mode.
5Press the “@” button.
6Press the “MENU” button
twice to turn off the menu
display.
7Press the shutter release
button to take the picture.
Display
appearance
when
[SEPIA]
mode is
selected.
White Balance
An image’s color will change depending on the kind of light source
present. Select the white balance as follows to compensate for different
light sources.
[AUTO]
(default) In this mode, the white balance is set automatically by
the camera.
[]Bright sun
[]Incandescent light bulbs (Tungsten)
[]Cloudy weather
[]Fluorescent light
[PRESET]Use this setting when you wish to set the white balance
manually. Instructions for setting the white balance can
be found on page 33.
<Operation>
1Press the “MENU” button.
2Press the “#” button and
select [ ], then press the
“” button to confirm the
selection.
3Press “%” or “fi” button to
select [WB MODE], then press
the “#” button.
4Press “%” or “fi” button to
select the desired white
balance mode ([ ], [ ],
[], or [ ]).
名称未設定-9 2001.7.6, 6:09 PMPage 30-31 AdobePageMaker6.5J/PPC

3332
5Press the “@” button. 6Press the “MENU” button
twice to turn off the menu
display.
7Press the shutter release
button to take the picture.
Display
appearance
when [ ]
is selected. <Operation>
1Select [PRESET], then press
the “ ” button to confirm
selection.
2Point the camera at the white
part of the subject or other
material you wish to serve as
the white standard in the
image.
<Adjusting the Preset Value>
Use this function to manually set the white balance value. It allows you
to select what part of the subject you wish to serve as the standard for
“white” in the final image. For more exacting settings, use of a piece of
white paper or cardboard is recommended.
¶Electronic zoom must be disabled when setting the preset white balance
value.
Make sure the white material fills
up the entire screen as shown.
3Press the “ ” button to set
the white balance.
4Press the “MENU” button
twice to turn off the menu
display.
5Press the shutter release
button to take the picture.
Display
appearance
when
[PRESET]
is selected.
名称未設定-9 2001.7.6, 6:09 PMPage 32-33 AdobePageMaker6.5J/PPC

34
Aperture-Priority Photography
By default, the camera uses a programmed automatic exposure mode
which automatically sets both aperture and shutter speed in
accordance with the available light. In the aperture-priority AE mode,
you can manually fix the aperture at either F2.8 or F6.2 (values at the
wide-angle setting), and the camera will automatically set the shutter
speed for the correct exposure at that aperture.
<Operation>
1Press the “MENU” button.
2Press the “#” button to select
[], then press the “ ”
button to confirm the selection.
3Press the “%” or “fi” button to
select [AE MODE], then press
the “#” button.
4Press the “%” or “fi” button to
select [F6.2] or [F2.8].
5Press the “@” button.
6Press the “MENU” button
twice to turn off the menu
display.
7Press the shutter release
button to take the picture.
Display
appearance
when [F6.2]
is selected.
名称未設定-9 2001.7.6, 6:09 PMPage 34 AdobePageMaker6.5J/PPC