Konix DRAKKAR FREYIA User manual

USER MANUAL
FREYJA
Borderless wide screen
165
Hz
1MS
ULTRA FAST
165
Hz
1MS
ULTRA FAST
165
Hz
1MS
ULTRA FAST

Read all instructions before using the appliance and retain for reference.
1. Unplug the monitor before cleaning it with a slightly damp, clean cloth.
2. Wipingthescreenonceithasbeenturnedoffwithadrymicrobrecloth
is recommended.
3. Do not use cleaning alcohol, ammonia-based liquids or other harsh cleaners.
4. This monitor is designed with ventilation holes on the back of the casing.
Do not caver or black tnem.
5. Avoidplacingthemonitornearheaters,stoves,replacesorothersources
of heat, as well as in rooms lacking adequate ventilation.
6. Do not insert any objects or spray any liquids into the vents.
7. Do not position the monitor in unsafe locations. If the monitor falls, it may
be damaged and may injure nearby people.
8. Unplug the monitor if it is not going to be used for an extended period.
9. Do not place heavy objects on the monitor, its power cord or any
connected cables.
10. Do not open the back panel of the monitor, as it contains a high-voltage
current even when not plugged in.

3
A
CONTENTS
• Contents.....................................................................................03
• Components ............................................................................ 04
• Overview ................................................................................. 05
• Stand Assembly...................................................................... 06
• Wall Mounting..........................................................................08
• Connectivity............................................................................. 09
• Basic Operation.........................................................................11
• lndicator Light............................................................................11
• Operation.................................................................................... 12
• List of Functions...................................................................... 13
• ECO Modes and Gameplus Switching .............................14
• Specications ............................................................................15
• Note ..............................................................................................16
Read all instructions before using the appliance and retain for reference.
1. Unplug the monitor before cleaning it with a slightly damp, clean cloth.
2. Wipingthescreenonceithasbeenturnedoffwithadrymicrobrecloth
is recommended.
3. Do not use cleaning alcohol, ammonia-based liquids or other harsh cleaners.
4. This monitor is designed with ventilation holes on the back of the casing.
Do not caver or black tnem.
5. Avoidplacingthemonitornearheaters,stoves,replacesorothersources
of heat, as well as in rooms lacking adequate ventilation.
6. Do not insert any objects or spray any liquids into the vents.
7. Do not position the monitor in unsafe locations. If the monitor falls, it may
be damaged and may injure nearby people.
8. Unplug the monitor if it is not going to be used for an extended period.
9. Do not place heavy objects on the monitor, its power cord or any
connected cables.
10. Do not open the back panel of the monitor, as it contains a high-voltage
current even when not plugged in.
SAFETY AND WARNINGS

4
A
AMonitor
BStand Stem
CStand Base
DCM4*23mm Screws x 4
EKM4*12mm Screws x 2
FVESA connectors x 4
GPower Adapter
HHDMI Cable
IUser Guide
COMPONENTS
OVERVIEW
Monitor Controls
Monitor Ports
User Gu ide
24 ” FreeSync Monitor
(D24IP144A)
A
B C D
H
G
E
IF

5
FVESA connectors x 4
GPower Adapter
HHDMI Cable
IUser Guide
OVERVIEW
Monitor Controls
Menu Button: Press to display the OSD menu or enter sub-menus.
Up Button: Press to move up in the menus.
Down Button: Press to move down in the menus.
Exit Button: Press to exit.
Power Button: Press to turn the monitor on/off.
A
Monitor Ports
Audio Output: lnsert one end of the Audio cable into the computer's Audio
output to receive the Audio signals from your monitor.
HDMI Connector: lnsert one end of the HDMI cable into the computer's
HDMI output and connect the other end to the monitor's HDMI port.
DisplayPort Connector: Insert one end of the DisplayPort cable into the
computer’s DisplayPort output and connect the other end to the monitor’s
DisplayPort port.
Power Connector: Insert the power cable to supply power to the monitor.
9
1
3
4
5
2
1 M
2
3
4 E
5
6
9
8
7
8
7
6
9
1
3
4
5
2
1 M
2
3
4 E
5
6
9
8
7
8
7
6
9
1
3
4
5
2
1 M
2
3
4 E
5
6
9
8
7
8
7
6
9
1
3
4
5
2
1 M
2
3
4 E
5
6
9
8
7
8
7
6
9
1
3
4
5
2
1 M
2
3
4 E
5
6
9
8
7
8
7
6

6
A
Keep the foam underneath the monitor before attaching the stand.
STAND ASSEMBLY
1. Open the packaging, gently take out the foam and monitor.
2. Remove the upper foam, keep the monitor laying on nether foam.
3. Take out stem and base, Lock them with 2pcs KM4*12mm screws.
(Screws are in the accessory bag, 1pcs buffer)

7
A
4. Insert the stem to the slot of back cover, them lock them
with 4pcs CM4*23mm screws.( Screws are in the accessory
bag, 1pcs buffer )
5. Gently have the monitor stand up and enjoy using it.

8
A
WALL MOUNTING
CONNECTIVITY
Power Cable
Connect the included power cable to the power connector, and then plug
the other end into an wall outlet.
Earphones
Plug in your earphones to receive audio signals from your monitor. If your
earphones are connected to the monitor and audio devices are connec-
ted to your computer at the same time, the audio devices will not produce
sound. Earphones and other audio devices not included.
HDMI
In order for the monitor to receive HDMI signals from the computer, use a
HDMI cable to connect the monitor to the computer.
Mount
(Not included)
1. Open the packaging, gently take out the foam and monitor.
2. Remove the upper foam, keep the monitor laying on nether foam.
3. Take out 4pcs VESA Connector(25mm height, in the accessory bag),
and lock them in back cover with straight screwdriver.
4. Follow the directions with your mount, and install the monitor on the
wall or bracket as you like.

9
A
CONNECTIVITY
Power Cable
Connect the included power cable to the power connector, and then plug
the other end into an wall outlet.
Earphones
Plug in your earphones to receive audio signals from your monitor. If your
earphones are connected to the monitor and audio devices are connec-
ted to your computer at the same time, the audio devices will not produce
sound. Earphones and other audio devices not included.
HDMI
In order for the monitor to receive HDMI signals from the computer, use a
HDMI cable to connect the monitor to the computer.
Power Adapter
Earphones
(Not included)
HDMI Cable
(included)
HDMI
OUTPUT
PC

10
A
DP
In order for the monitor to receive DP signals from the computer, use the
DP cable to connect the monitor to the computer.
DP Cable
(lncluded)
BASIC OPERATION
Solid blue light indicates power is on and the monitor is operating normally.
Flashing blue light indicates no video source has been detected. Red light
indicates that no horizontal or vertical signal has been detected or voltage
is low. Please ensure your computer is turned on and all video cables are
fully inserted and/or connected.
1. Connect the other end of the cable to the corresponding connector
on your monitor.
2. Connect the power cab le to your monitor then connect the other end to
your power source. lt is recommended that you use a surge protector with
adequate voltage if a wall cannot be reached directly plug.
3. Locate the power button on the monitor and press it to turn the monitor on.
FreeSync
The feature itself is on by default when setting 75Hz refresh rate. In order
to use this feature, please note you must have hardware with FreeSync ca-
pability, an HDMI cable, and the latest graphic drivers. To us e this feature,
connect your computer and monitor with an HDMI cable. After connecting,
you may receive a prompt to enable the feature on your computer. If you
do not receive the prompt, you may need to enable the function in your
graphics card menu. See your graphics card manufacturer’s documentation
for instructions on how to turn on and/or enable FreeSync.
INDICATOR LIGHT
DP
OUTPUT
PC

11
A
BASIC OPERATION
Solid blue light indicates power is on and the monitor is operating normally.
Flashing blue light indicates no video source has been detected. Red light
indicates that no horizontal or vertical signal has been detected or voltage
is low. Please ensure your computer is turned on and all video cables are
fully inserted and/or connected.
lnsert one end of the DP cable into your PC’s graphics card. A
HDMI cable may also be used. A HDMI cables is not included.
HDMI Connector
DP Connector
1. Connect the other end of the cable to the corresponding connector
on your monitor.
2. Connect the power cab le to your monitor then connect the other end to
your power source. lt is recommended that you use a surge protector with
adequate voltage if a wall cannot be reached directly plug.
3. Locate the power button on the monitor and press it to turn the monitor on.
FreeSync
The feature itself is on by default when setting 75Hz refresh rate. In order
to use this feature, please note you must have hardware with FreeSync ca-
pability, an HDMI cable, and the latest graphic drivers. To us e this feature,
connect your computer and monitor with an HDMI cable. After connecting,
you may receive a prompt to enable the feature on your computer. If you
do not receive the prompt, you may need to enable the function in your
graphics card menu. See your graphics card manufacturer’s documentation
for instructions on how to turn on and/or enable FreeSync.
INDICATOR LIGHT
lndicator Light

12
A
The On-Screen Display (OSD) Menu may be used to adjust your monitor’s
settings and appears on screen alter turning on the monitor and pressing the
Mbutton.
OPERATION
Whenusingthemonitorforthersttime,settingswillautomatically
adjusttooptimalsettingsaccordingtoyourcomputer’sconguration
and parts etc.
1. Press any one of the buttons ( M, , , E, )
to activate the navigation window.
2. Press Mto enter the OSD menu.
3. Press or to browse functions.
• Highlight the desired function, then press Mto enter the sub-menu.
• Press or to browse sub-menus, then press Mto highlight the desired
function.
• Press or to highlight an option, then press Mtoconrmthesettings
and exit the current screen.
4. Press Eto exit the current screen.
LIST OF FUNCTIONS
DCR
STANDARD
LUMINOSITÉ
LUMINOSITÉ
CONTRASTE
ECO
MARCHE
eco
DCR
STANDARD
LUMINOSITÉ
LUMINOSITÉ
CONTRASTE
ECO
MARCHE
eco
Main Menu Sub-Menu OptionsDescription
BRIGHTNESS BRIGHTNESS 0~100 Adjust display brightness
CONTRAST 0~100 Adjust display contrast
ECOStandard,
Game, RTS,
FPS, Movie, Text
Set visual mode
DCR On Turn On DCR function
Off Turn OffDCR function
IMAGE
ASPECT Wide, Auto, 4:3 Set aspect ratio
COLOR TEMP. COLOR TEMP. Adjust color temperature
RED 0~100
0~100
0~100
0~100
0~100
Customize RGB components
GREEN 0~100
BLUE 0~100
OSD SETTING LANGUAGE English, Español,
Русский , Français,
한국, Português,
Deutsch, Türkçe,
�体中文,
Polski, Italiano,
Nederlands
Set OSD language
OSD H. POS. 0-100 Adjust the OSD horizontal
position
OSD V. POS 0-100 Adjust the OSD vertical position
OSD TIMER 0~60 Set how long the OSD remains
open after non-use
TRANSPARENCY 0-100 Set the OSD overall
transparency
,日�
H. POSITION
V. POSITION
Adiust horizontal position of the
picture of source.
Adiust picture clock to reduce the
vertical line noise.
Adiust picture phase to reduce
the level of noise.
Adiust vertical position of the
picture of source.
PHASE
CLOCK
Warm, Cool,
User

13
A
The On-Screen Display (OSD) Menu may be used to adjust your monitor’s
settings and appears on screen alter turning on the monitor and pressing the
Mbutton.
Whenusingthemonitorforthersttime,settingswillautomatically
adjusttooptimalsettingsaccordingtoyourcomputer’sconguration
and parts etc.
1. Press any one of the buttons ( M, , , E, )
to activate the navigation window.
2. Press Mto enter the OSD menu.
3. Press or to browse functions.
• Highlight the desired function, then press Mto enter the sub-menu.
• Press or to browse sub-menus, then press Mto highlight the desired
function.
• Press or to highlight an option, then press Mtoconrmthesettings
and exit the current screen.
4. Press Eto exit the current screen.
LIST OF FUNCTIONS
Main Menu Sub-Menu OptionsDescription
BRIGHTNESS BRIGHTNESS 0~100 Adjust display brightness
CONTRAST 0~100 Adjust display contrast
ECOStandard,
Game, RTS,
FPS, Movie, Text
Set visual mode
DCR On Turn On DCR function
Off Turn OffDCR function
IMAGE
ASPECT Wide, Auto, 4:3 Set aspect ratio
COLOR TEMP. COLOR TEMP. Adjust color temperature
RED 0~100
0~100
0~100
0~100
0~100
Customize RGB components
GREEN 0~100
BLUE 0~100
OSD SETTING LANGUAGE English, Español,
Русский , Français,
한국, Português,
Deutsch, Türkçe,
�体中文,
Polski, Italiano,
Nederlands
Set OSD language
OSD H. POS. 0-100 Adjust the OSD horizontal
position
OSD V. POS 0-100 Adjust the OSD vertical position
OSD TIMER 0~60 Set how long the OSD remains
open after non-use
TRANSPARENCY 0-100 Set the OSD overall
transparency
,日�
H. POSITION
V. POSITION
Adiust horizontal position of the
picture of source.
Adiust picture clock to reduce the
vertical line noise.
Adiust picture phase to reduce
the level of noise.
Adiust vertical position of the
picture of source.
PHASE
CLOCK
Warm, Cool,
User

14
D24IP165A
24"
IPS
E-LED
250cd/m²
1920x1080
16:9
165Hz
543.4x498.2x232.2mm
543.4x323.5x45.3mm
4.8kg
Adapter
DP*1, HDMI1.4*2
DC 12V 3.0A
GTG1ms
178 178
3000:1
5.9kg
Net Weight
Gross Weight
HDMI Cable
75x75
16.7M
YES
YES
NO
YES
YES
YES
YES
(H) / (V)
Model
Screen Size
Aspect Ratio
Backlight
Brightness
Panel
Resolution
Refresh Rate
Response Time
Viewing Angle
Contrast Ratio
VESA Mounting
Signal Inpt
Power
AMD FreeSync
Colours
Audio
Speakers
Audio Out
Accessories
Additional Functions
Flicker Free
Dimensions (w / Stand )
Dimensions(w/oStand )
Physical Dimensions
Low Blue Light
A
ECO MODES AND GAMEPLUS SWITCHING
1. Press any one of the buttons ( M, , , E, )
to activate the navigation window.
2. Press to switch Gameplus modes. According to the needs of your game,
choose the corresponding game icon. These game icons are primarily
designed to optimize your aim during shooting games, though they can be
used for other scenarios.
2. Press to switch ECO modes. These modes include Standard, Text, Movie,
Game, FPS and RTS modes and con be used to optimize settings according
to your activity. Standard mode is suitable for most activities.
SPECIFICATIONS
Main Menu Sub-Menu OptionsDescription
RESET
RESET N/A Reset monitor configurations
AUTRES SIGNAL SOURCE
HDMI,VGA
OFF,Normal,Flicker
High,Middle,Low,Off
Display the input signal
VOLUME
LED EFFECT
OVER DRIVER
LOW BLUE RAY
FREESYNC
0-100
0-100
Adjust audio volume
Set blue light filtering level
TurntheFreeSyncfunctionon/off
SettheOverdriverfunction
AUTO ADJUST.
PICTURE
AUTO ADJUST.
COLOR
Auto adjust picture
Auto adjust picture color
On,Off
eco
Main Menu Sub-Menu OptionsDescription
RESET
RESET N/A Reset monitor configurations
AUTRES SIGNAL SOURCE
HDMI,VGA
OFF,Normal,Flicker
High,Middle,Low,Off
Display the input signal
VOLUME
LED EFFECT
OVER DRIVER
LOW BLUE RAY
FREESYNC
0-100
0-100
Adjust audio volume
Set blue light filtering level
TurntheFreeSyncfunctionon/off
SettheOverdriverfunction
AUTO ADJUST.
PICTURE
AUTO ADJUST.
COLOR
Auto adjust picture
Auto adjust picture color
On,Off
eco
Main Menu Sub-Menu OptionsDescription
RESET
RESET N/A Reset monitor configurations
AUTRES SIGNAL SOURCE
HDMI, VGA
OFF,Normal,Flicker
High,Middle,Low,Off
Display the input signal
VOLUME
LED EFFECT
OVER DRIVER
LOW BLUE RAY
FREESYNC
0-100
0-100
Adjust audio volume
Set blue light filtering level
TurntheFreeSyncfunctionon/off
SettheOverdriverfunction
AUTO ADJUST.
PICTURE
AUTO ADJUST.
COLOR
Auto adjust picture
Auto adjust picture color
On,Off
eco
Main Menu Sub-Menu OptionsDescription
RESET
RESET N/A Reset monitor configurations
AUTRES SIGNAL SOURCE
HDMI, VGA
OFF,Normal,Flicker
High,Middle,Low,Off
Display the input signal
VOLUME
LED EFFECT
OVER DRIVER
LOW BLUE RAY
FREESYNC
0-100
0-100
Adjust audio volume
Set blue light filtering level
TurntheFreeSyncfunctionon/off
SettheOverdriverfunction
AUTO ADJUST.
PICTURE
AUTO ADJUST.
COLOR
Auto adjust picture
Auto adjust picture color
On,Off
eco

15
D24IP165A
24"
IPS
E-LED
250cd/m²
1920x1080
16:9
165Hz
543.4x498.2x232.2mm
543.4x323.5x45.3mm
4.8kg
Adapter
DP*1, HDMI1.4*2
DC 12V 3.0A
GTG1ms
178 178
3000:1
5.9kg
Net Weight
Gross Weight
HDMI Cable
75x75
16.7M
YES
YES
NO
YES
YES
YES
YES
(H) / (V)
Model
Screen Size
Aspect Ratio
Backlight
Brightness
Panel
Resolution
Refresh Rate
Response Time
Viewing Angle
Contrast Ratio
VESA Mounting
Signal Inpt
Power
AMD FreeSync
Colours
Audio
Speakers
Audio Out
Accessories
Additional Functions
Flicker Free
Dimensions (w / Stand )
Dimensions(w/oStand )
Physical Dimensions
Low Blue Light
A
1. Press any one of the buttons ( M, , , E, )
to activate the navigation window.
2. Press to switch Gameplus modes. According to the needs of your game,
choose the corresponding game icon. These game icons are primarily
designed to optimize your aim during shooting games, though they can be
used for other scenarios.
SPECIFICATIONS

NOTES
Lisez toutes les instructions avant d’utiliser l’appareil et conservez-les pour référence.
1. Débranchez le moniteur avant de le nettoyer avec un chiffon propre légèrement humide.
2 Ilestrecommandéd’essuyerl’écranunefoiséteint,avecunchiffonenmicrobresec.
3 N’utilisez pas d’alcool ménager, de liquides à base d’ammoniac ou d’autres nettoyants
agressifs.
4. Cemoniteurestdotésd’oricesdeventilationàl’arrièreduboîtier.Nelescouvrezpaset
ne bloquez pas le passage de l’air.
5. Évitez de placer le moniteur à proximité d’un radiateur, d’une cuisinière, d’un feu de
cheminée ou d’une autre source de chaleur, ou dans une pièce ne disposant pas d’une
ventilation adéquate.
6. N’insérezaucunobjetetnevaporisezaucunliquidedanslesoricesdeventilation.
7. N’installez pas le moniteur à un emplacement non sécurisé. Si le moniteur tombe, il peut
être endommagé et blesser les personnes à proximité.
8. Si le moniteur n’est pas utilisé pendant une période prolongée, débranchez-le.
9. Ne placez pas d’objets lourds sur le moniteur, sur son câble d’alimentation ou sur les câbles
qui y sont connectés.
10. N’ouvrez pas le panneau arrière du moniteur : même lorsque le moniteur n’est pas branché,
il est exposé à un courant haute tension.

17
Z
TABLE DES MATIÈRES
• Table des matières .................................................................. 17
• Composants...............................................................................18
• Présentation ............................................................................. 19
• Montage du support..............................................................20
• Montage mural......................................................................... 22
• Connectivité..............................................................................23
• Fonctionnement de base..................................................... 25
• Voyant lumineux .....................................................................25
• Utilisation ...................................................................................26
• Liste des Fonctions................................................................ 27
• Changement de mode ECO et Gameplus.....................28
• Caractéristiques ......................................................................29
• Remarques ................................................................................30
Lisez toutes les instructions avant d’utiliser l’appareil et conservez-les pour référence.
1. Débranchez le moniteur avant de le nettoyer avec un chiffon propre légèrement humide.
2 Ilestrecommandéd’essuyerl’écranunefoiséteint,avecunchiffonenmicrobresec.
3 N’utilisez pas d’alcool ménager, de liquides à base d’ammoniac ou d’autres nettoyants
agressifs.
4. Cemoniteurestdotésd’oricesdeventilationàl’arrièreduboîtier.Nelescouvrezpaset
ne bloquez pas le passage de l’air.
5. Évitez de placer le moniteur à proximité d’un radiateur, d’une cuisinière, d’un feu de
cheminée ou d’une autre source de chaleur, ou dans une pièce ne disposant pas d’une
ventilation adéquate.
6. N’insérezaucunobjetetnevaporisezaucunliquidedanslesoricesdeventilation.
7. N’installez pas le moniteur à un emplacement non sécurisé. Si le moniteur tombe, il peut
être endommagé et blesser les personnes à proximité.
8. Si le moniteur n’est pas utilisé pendant une période prolongée, débranchez-le.
9. Ne placez pas d’objets lourds sur le moniteur, sur son câble d’alimentation ou sur les câbles
qui y sont connectés.
10. N’ouvrez pas le panneau arrière du moniteur : même lorsque le moniteur n’est pas branché,
il est exposé à un courant haute tension.
SÉCURITÉ ET AVERTISSEMENTS

18
Z
AMoniteur
BPied de support
CBase de support
DVis CM4*23mm (x2)
EVis KM4*12mm (x2)
FConnecteurs VESA (x4)
GAdaptateur électrique
HCâble DP
IGuide de l’utilisateur
COMPOSANTS
PRÉSENTATION
Commandes du moniteur
Ports du moniteur
User Gu ide
24 ” FreeSync Monitor
(D24IP144A)
A
B C D
H
G
E
IF

19
Z
FConnecteurs VESA (x4)
GAdaptateur électrique
HCâble DP
IGuide de l’utilisateur
PRÉSENTATION
Commandes du moniteur
Bouton Menu :appuyezsurleboutonpourafcherlemenuOSDouaccéderauxsous-menus.
Bouton bas : appuyez sur le bouton pour déplacer le curseur vers le bas dans les menus.
Bouton haut : appuyez sur le bouton pour déplacer le curseur vers le haut dans les menus.
Bouton de sortie : appuyez sur le bouton pour sortir.
Bouton d’alimentation : appuyez sur le bouton pour allumer/éteindre le moniteur.
Ports du moniteur
Sortie audio : insérez un câble audio dans la sortie audio de l’ordinateur pour transmettre
les signaux audios de votre moniteur.
Connecteur HDMI : Branchez le câble HDMI à la sortie HDMI de l’ordinateur et connectez l’autre
extrémité au port HDMI du moniteur.
Connecteur DisplayPort : Insérez une extrémité du câble DisplayPort dans la sortie DisplayPort
de l’ordinateur et connectez l’autre extrémité au port DisplayPort du moniteur.
Connecteur d’alimentation : insérez le câble d’alimentation pour brancher le moniteur.
9
1
3
4
5
2
1 M
2
3
4 E
5
6
9
8
7
8
7
6
9
1
3
4
5
2
1 M
2
3
4 E
5
6
9
8
7
8
7
6
9
1
3
4
5
2
1 M
2
3
4 E
5
6
9
8
7
8
7
6
9
1
3
4
5
2
1 M
2
3
4 E
5
6
9
8
7
8
7
6
9
1
3
4
5
2
1 M
2
3
4 E
5
6
9
8
7
8
7
6

20
Maintenezlamousseenplacesouslemoniteuravantdexerlesupport.
MONTAGE DU SUPPORT
1. Ouvrez l’emballage, retirez doucement la mousse et sortez le moniteur.
2. Retirez la mousse du haut, laissez le moniteur posé sur la mousse du bas.
3. Retirez la tige et la base, verrouillez-les avec 2 vis KM4 * 12 mm.
(Les vis sont dans le sachet d’accessoires, tampon 1 pièce)
Z