KonNad C2000-A1-SDD1010-AB3 User manual

2019年10月12日 Updated
C2000-A1-SDD1010-AB3
User Manual
Ethernet ⇋ 1DI + 1DO
Remote I/O Module — Ethernet Digital I/O Module
Shenzhen United Innovation Automatic Control System Co., Ltd.

2
6
6
7
12
14
14
16
19
20
Table of Contents
Table of Contents
1. Hardware Description
1.1. Apprearance
1.2. Indicator
1.3. Port Description
1.4. Product Dimensions and Appearance
1.5. Installation Method
1.6. Specifications
2. Package Contents
3. WARRANTY POLICY
C2000-A1-SDD1010-AB3 User Manual
2 / 21
SinoCon Co., Ltd. konnad.com

Copyright Notice
©2000 - 2019 SinoCon Co., Ltd. All Rights Reserved.
Trademarks
The KonNaD logo is a registered trademark of SinoCon Co., Ltd.
All other trademarks or registered marks in this manual belong to
their respective manufacturers.
Disclaimer
This document only provides information about KonNaD
products. No license to any intellectual property rights is granted
by this document, including any intellectual property licenses,
expressed or implied, or by any means. SinoCon assumes no
responsibility other than the liability stated by SinoCon in the
terms and conditions of sale of its products and SinoCon makes
no warranties regarding the sale or use of KonNaD products,
including the suitability for the specific use of the products, and
marketability, and SinoCon doesn't guarantee that it won't
infringe any patent, copyright or other intellectual property
rights, etc.
Information in this document is subject to change without notice
C2000-A1-SDD1010-AB3 User Manual
3 / 21
SinoCon Co., Ltd. konnad.com

and does not represent a commitment on the part of SinoCon.
Contact US
SinoCon Co., Ltd.
Address: 16th Floor, Tower A, Zhongyin Building, Caitian Road,
Futian District, Shenzhen, China
Web: konnad.com
Tel: [phone]
C2000-A1-SDD1010-AB3 User Manual
4 / 21
SinoCon Co., Ltd. konnad.com

C2000-A1-SDD1010-AB3 User Manual
5 / 21
SinoCon Co., Ltd. konnad.com

1. Hardware Description
1.1. Apprearance
C2000-A1-SDD1010-AB3 User Manual
6 / 21
SinoCon Co., Ltd. konnad.com

1.2. Indicator
Classification Indicator Description Meaning
Digital Input DIx Digital input
indicators
Steady on：
Short to GND
or input
voltage >
threshold
voltage
Off：Open or
input voltage
< threshold
voltage
Digital
Output DOx Digital input indicators
Steady on：
On
Off：Off
Steady on：
Network
connection
enabled
C2000-A1-SDD1010-AB3 User Manual
7 / 21
SinoCon Co., Ltd. konnad.com

Ethernet
LINK
Network
status
indicator
Flashing：
transmit or
receive data
Off：The
network port
is not plugged
into the
network cable
or is not
properly
connected to
the router
SPD 10/100Mbps
indicator
Steady on：
100M network
connected
C2000-A1-SDD1010-AB3 User Manual
8 / 21
SinoCon Co., Ltd. konnad.com

Off：Not
connected to
the 100M
network,
check whether
the router
supports
100M network
Downstream
Serial Port
RXD
RS485 data
receive
indicator
Steady on：
RS485 line
fault, please
check if the
positive and
negative poles
of 485 line are
reversed
Flashing：
RS485
receiving data
Off：RS485 no
receiving data
C2000-A1-SDD1010-AB3 User Manual
9 / 21
SinoCon Co., Ltd. konnad.com

TXD
RS485 data
transmit
indicator
Flashing：
RS485
transmitting
data
Off：RS485 no
transmitting
data
Power PWR Power
indicator
Steady on：
Normal power
supply
Off：No
power or
abnormal
power supply,
please check if
the voltage
range is
9 27VDC
Steady on：
Device
exception
C2000-A1-SDD1010-AB3 User Manual
10 / 21
SinoCon Co., Ltd. konnad.com

RUN RUN Running
indicator
Flashing：
Flashes every
1 second
when the
device is ready
Off：Device
exception
C2000-A1-SDD1010-AB3 User Manual
11 / 21
SinoCon Co., Ltd. konnad.com

1.3. Port Description
Classification Port Description Recommended
wiring
Digital Input
DIx Digital input RVV 2*0.5
GND
Dry contact
input
common
RVV 2*0.5
Digital
Output
NO
Digital
output
normally
open
RVV 2*1.0
COM
Digital
output
common
RVV 2*1.0
NC
Digital
output
normally
close
RVV 2*1.0
C2000-A1-SDD1010-AB3 User Manual
12 / 21
SinoCon Co., Ltd. konnad.com

Ethernet Ethernet
RJ45
Ethernet
port
CAT-5e
Downstream
Serial Port
485+ 、
485-
RS485+,
RS485-
(downward)
RVSP 2*1.0
Power Input
V+、V-
Power
supply input
positive,
power
supply input
negative
RVV 2*1.0
PE
Used for
reliable
grounding
of the
device,
surge
protection
RVV 2*0.5
C2000-A1-SDD1010-AB3 User Manual
13 / 21
SinoCon Co., Ltd. konnad.com

1.4. Product Dimensions and Appearance
unit: mm（inch）
1.5. Installation Method
C2000-A1-SDD1010-AB3 User Manual
14 / 21
SinoCon Co., Ltd. konnad.com

C2000-A1-SDD1010-AB3 User Manual
15 / 21
SinoCon Co., Ltd. konnad.com

1.6. Specifications
Classification Parameter Specification
Digital Input
DI Channels 1
DI Connector Terminal
block
Input Type Dry contact
DI Mode Logic level &
pulse count
Digital Filtering Time
Interval
6 sample
periods
Counter Frequency 1kHz
Digital Output
DO Channels 1
DO Connector Terminal
block
DO Type Form C
DO Mode Logic Level
Contact Capacity 30V/3A
C2000-A1-SDD1010-AB3 User Manual
16 / 21
SinoCon Co., Ltd. konnad.com

Ethernet
No. of Ports 1
Bandwidth 10/100M
Communication
Distance 100m
Industrial Protocols
Standard
Modbus TCP
Protocol
Protocol Mode
Support TCP
Server/Client
Mode
Downstream
Serial Port
Serial Standard RS485
No. of Ports 1
Connector Terminal
block
Cascade
Connection/Transparent
Transmission
RS485
cascade
connection
Power Connector Terminal
block
C2000-A1-SDD1010-AB3 User Manual
17 / 21
SinoCon Co., Ltd. konnad.com

Power Input Voltage 9~27VDC
Current 160mA @
12VDC
Physical
Characteristics
Dimensions 76*106*31mm
Installation din-rail or wall
Environmental
Limits
Operating Temperature -40℃ ~ 85℃
Storage Temperature -60℃ ~ 125℃
Ambient Relative
Humidity
5% ~ 95% RH,
non-
condensing
C2000-A1-SDD1010-AB3 User Manual
18 / 21
SinoCon Co., Ltd. konnad.com

2. Package Contents
No. Contents
1 Device (contain mounting kit) * 1
2 Terminal block * 1 set
3 Installation guide card * 1
C2000-A1-SDD1010-AB3 User Manual
19 / 21
SinoCon Co., Ltd. konnad.com

3. WARRANTY POLICY
In the normal use of the products you purchased, free
warranty service will be provided from the date of purchase
whenever the quality problems caused by raw materials or
production process are concerned. However, due to the user's
failure to install, disassemble or improperly use the product
according to the requirements of this product manual, the
company provides maintenance services, but charges appropriate
maintenance fees. The warranty period is as follows:
Product category Warranty Period
Shelled product 6years
Unshelled product 3years
Note: Accessories are not covered by warranty.
Warranty Terms:
1. From the date of purchase, in the case of normal use
(determined by the company's authorized technicians),
the failed product will be repaired free of charge during
the warranty period.
2. Products that have been repaired or modified by a
maintenance personnel other than our company during
C2000-A1-SDD1010-AB3 User Manual
20 / 21
SinoCon Co., Ltd. konnad.com