Kontron KBox N-110 Series User manual

KBox N-110 Series - Quick Installation Guide - Version 1.0// P/N: 0D20NWA650010200 // 1

KBox N
-110 SERIES - QUICK INSTALLATION GUIDE
Thank you for purchasing the Kontron KBox N-110 Series network security appliance. This document provides
information to allow you to quickly install this product.
Packing Checklist
1. Take the KBox N-110 Series out of the packing box and check if the unit is properly secure in the plastic bag.
2. Check the contents of the carton box: (*: optional)
1x KBox N-110 Series
1x Power adapter
1x Power cord (plug type depending on country)
Memory module(s)* (It may be pre-installed in the system depending on ordered configuration.)
Internal 2.5" SATA HDD / SSD* (It may be pre-installed in the system depending on ordered configuration.)
mSATA SSD* (It may be pre-installed in the system depending on ordered configuration.)
mPCIe card* (It may be pre-installed in the system depending on ordered configuration.)
M.2 Key A expansion card* (It may be pre-installed in the system depending on ordered configuration.)
M.2 Key B SSD* (It may be pre-installed in the system depending on ordered configuration.)
M.2 Key B expansion card* (It may be pre-installed in the system depending on ordered configuration.)
Front I/O Panel
1 Power LED
2 Storage LED
3 Act / Link LED
1
5
6
9
2
5
3
3
3
3
3
3
4
4
4
4
4
4
8
9
7
11
10

KBox N-110 Series - Quick Installation Guide - Version 1.0// P/N: 0D20NWA650010200 // 2
4 Speed LED
5 LAN Bypass LED
6 Status LED
7 Alarm LED
8 Wireless LED
9 User-defined LED
10 Programmable Switch Button
11 Clear CMOS Switch Button
Rear I/O Panel
1 DC-In Jack
2 VGA
3 GbE
4 USB 3.0
5 RS232
6 Wi-Fi Antenna Port
7 3G / 4G Antenna Port
1
3
4
2
4
3
3
3
3
3
5
6
6
7
7