Kozyard KZL511BL User manual

Outdoor Patio Lounge Chair
Assembly Instuctions
Kozyard LLC Products
© Copyright 2016 - 2019 Kozyard LLC. | All Rights Reserved.
www.kozyard.com

ASEEMBLY INSTUCTIONS
TOOLS REQUIRED:
ALLEN WRENCH
SCREWDRIVER
(PROVIDED)
Warning:
1. Do not exceed 450lbs weight limit.
2. Make sure the lounger is located on a solid level surface.
Prior to assembly, make sure to lay out and identify all of the parts listed below
in the parts list.
Tighten all nuts and bolts securely. All bolts should be hand tightened before use.
Never use power tools or excessive force during assembly and tightening of bolts.
Should you experience any difficulty during assembly, or if any of the parts are
missing or damaged, contact our customer service by email: [email protected]
or call toll free: 866-355-0018.

C
1X 1X
A
2X
B
1X
F
14X
M6X30
Bolts
Allen wrench
Bolts
Screws Plastic cylinder
K
1X 1X
E
1X
G
2X
H
2X
ST4X15
J
1X
L
D
1X
8X
MN
M6X45
O
Part list
Plastic bar
Leg
Leg Leg
Leg
Main Seat Frame
Back Adjustment tube

C
D
E
F
B
J
STEP -1 Fix 4 legs (Parts C, D, E, F) to Part B separately using
Bolt J as shown in diagram.
STEP -2 Install Part A to the legs as shown in diagram.
A
L
Turning it around,attach part A to the legs
using Screws L.

STEP -3 Link Part H to Part G using Bolts J as shown in diagram.
STEP -4 Connect Part G to Part B using Bolts K
as shown in diagram.
G
M
H
J
Please note:The Plastic cylinder Part M
must be between Part G and Part H.
K
B
G
Check to make sure all screws are fixed tightly before use.

Kozyard LLC
10808 6th St Ste 100 Rancho
Cucamonga CA 91730
Follow us on Instagram
www.instagram.com/kozyard
Upload a picture of your Kozyard
product in your home with the
hashtag #kozyard share with your
friends.
Toll free: 1-8660355-0018
www.kozyard.com
email: [e-mail]