Kozyard KZL527 User manual

Outdoor Patio Steel Lounge Chair
Assembly Instructions
Kozyard LLC Products
© Copyright 2016 - 2020 Kozyard LLC. | All Rights Reserved.
www.kozyard.com

ASEEMBLY INSTRUCTIONS
TOOLS REQUIRED:
ALLEN WRENCH
SCREWDRIVER
(PROVIDED)
Warning:
1. Do not exceed 360lbs weight limit.
2. Make sure the lounger is placed on a solid level surface.
Prior to assembly, make sure to lay out and identify all of the parts listed below
in the parts list.
Tighten all nuts and bolts securely. All bolts should be hand tightened before use.
Never use power tools or excessive force during assembly and tightening of bolts.
Should you experience any difficulty during assembly, or if any of the parts are
missing or damaged, contact our customer service by email: [email protected]
or call toll free: 866-355-0018.

C
2X 2X
A
2X
B
2X
F
4X+1X
4X+1X 8X+2X
M6X30
Bolts
Allen Wrench Screwdriver
Bolts
J
2X
2X
2X
E
G
24X+4X
HI
1X1X
K
D
4X+1X
L
M6X35
M
Part list
Back
Left Leg
Support Bar
Head Cushion
Support Column
Right Leg
Main Seat Frame
M6X30
Bolts
M6X16
Bolts
Plastic
Cylinder

STEP -1 Connect 2 Legs (Parts C & D ) using Support Column
(Part F), and Bolt (H) and Bolt (G) as shown in diagram.
STEP -2 Connect 2 Legs (Parts C & D ) using Support Bar
(Part E) and Bolt (I) as shown in diagram.
C
H
G
F
D
C
I
I
E
D

STEP -3 Attach Main Seat Frame (Part B) to Legs (Part C & Part D)
using Bolt (J) as shown in diagram.
STEP -4 Link Back (Part A) to Legs (Part C & Part D) using Bolt(J)
as shown in diagram..
C
B
D
D
B
J
K
J
C
A
D

STEP-5 Check to make sure all screws are fixed tightly
before use.
STEP-6 Put the Head Cushion (Part M) on the Back as shown in
diagram.
M

Follow us on Instagram
www.instagram.com/kozyard
Toll free: 1-8660355-0018
www.kozyard.com
email: [e-mail]
10808 6th ST, Unit 100,
Rancho Cucamonga,
CA 91730