KP&P PSS User manual

KP&P PSS USER MANUAL
19 DEC. 2011

CONTENTS
1. KP&P PSS LINE-UP
E-BODY PROTECTOR (EBP)
SCORING BOX
RECEVER
2. OPERATION SOFTWARE
RULE SETTING
RULE SETTING DISPLAY
REGISTRATION DISPLAY
CONTROL PANEL
OPERATIING COMPUTER’S DISPLAY
EBP TEST MODE
------------------------------- 4
------------------------------------------- 5
--------------------------------------------------- 7
--------------------------------------------- 8
------------------------------------ 9
----------------------------------- 9
------------------------------------------ 10
---------------------- 11
------------------------------------------- 12

1. KP&P PSS LINE-UP
KP&P PSS
Wireless System
EBP
Foot Protector
Referee Scoring Box
Operation Program
Receiver

1. KP&P PSS LINE-UP
EBP
How to power on/off and Register
①Power ON / OFF
- Press power button over 3 sec
until hear Bleep sound
- ‘Power LED (red)’ ON / OFF
②Registration
- Press ‘Registration’ button after
press ‘vest reg’ icon in operation
program
- “Registered’ message will be
shown on program display and
green light will be on with beep
sound when registered.
Reset
USB Connector
Register LED
Register Button
Power Button
Power LED
How to Recharge
①Be ware of discharge of electricity (recharge it before 25% left)
②2 hours for full-charge (Run EBP for 10 hours normally)
③Green light is on while recharging and off after competing recharging

1. KP&P PSS LINE-UP
SCORING BOX
How to power on/off and Register
①Power ON / OFF
- Press power button over 3 sec
until hear Bleep sound
- ‘Power LED’ ON / OFF
②Registration
- Press ‘Registration’ button after
pressing ‘ref 1, ref 2,…’ icon in
operation program
- “Registered’ message will be
shown on program display and
green light will be on with beep
sound when registered.
Reset Button
Recharge Connector
How to Recharge
①Be ware of discharge of electricity (recharge it before 25% left)
②2 hours for full-charge (Run EBP for 10 hours normally)
③Green light is on while recharging and off after competing recharging
Power Button
③
Register Button

1. KP&P PSS LINE-UP
SCORING BOX
How to Work
①Fist point (1 point)
- Referee pressed ‘fist’ button when the attack is a fist punch.
- Valid point is expressed when at least two of three referees pressed button.
②Technical Point (1 point)
- Referee pressed ‘technical’ button when the attack is a technical kick.
- Valid point is expressed when at least two of three referees pressed button.
③Head Point (3 points)
- Valid point is expressed when at least two of three referees pressed button.
Head PointHead Point
Technical
Point
Fist Point
Technical
Point
Fist Point

1. KP&P PSS LINE-UP
RECEIVER
How to connect to computer
①‘Power LED’ is on while receiver is connected to the powered computer
②‘Activation LED’ is on while operation software is activated.
Activation LED
Power LED

2. OPERATION SOFTWARE
Main Display
①Choose Court No.
-Make sure each Court has
own No.
②Set Competition Class
(Set Hit power level)
- See the next page for more
information.
③Select ‘Electronic Foot
Protectors’
④Setting Judges No.
⑤Toggle to ‘Use WTF Rule’
⑥Toggle to ‘Use Vibration’ mode
in Referee Box
- It does not apply to WTF rule.
⑦Time Setting
①②
③
④
⑤⑥
⑦
Rule Setting
1 423
Procedure
1. Rule Setting
2. Registration
3. Control Panel
4. Result View

①
Rule Setting Display
* Valid Power Level Setting
①Check Class in Competition Class
②Amending EBP Valid Power level
③Press 적용(Apply) Button
④‘Electronic Head Gear’ is not available now
④Registration of EBP
- Double click the resisted player list (red square #3)
- List Information is shown on Equipment Registration
- Click Blue ‘Vest Reg.’ and press the registration button on blue EBP before time bar ends
- When registered, ‘registered’ message is seen with green high light
- Follow same procedure on Red
- Click CLOSE
①Extending Registration Window
by Clicking Correction
②Registration players in
advance
- Type Match No, Gender,
Weight, Name and Nation
& Click ‘Registration’
- OK to Register multi Players
* OK to add players without
typing name
③List of Resisted Players
Double click the resisted player
list (red square #3)
Registration Display
②
③
①
②
③
④
④
2. OPERATION SOFTWARE

2. OPERATION SOFTWARE
Control Panel
Shi-Jak Si-Gan Kye-Shi
Chung win
Deuk-Jeom, Gam-Jeom, Kyong-go + or -
Cancel EBP point
Match End
- Click after Chung or Hong win
Shi-Jack/Kye-shi
Chung Kyong-go
※ Keyboard Shortcut
Back to Main Display
Fight within 10 sec
Hong Kyong-go

2. OPERATION SOFTWARE
Operating Computer’s Display
Display of Battery Remain
Last hit power
Yellow Highlight
when Valid Power
Hit level Graph
(Shi-Gan, Kye-Shi & Break time)
Valid minimum Power

EBP Test Mode
①
②
③
④
⑤
①Press ‘TEST’ on the right side of Match Display
②Pop-up window, ‘Are you sure to go to Equipment Test Mode?’ Click ‘Yes’
③It turns ‘TEST’ mode & Ready to TEST
④Exit to Previous Display –Press ‘RETURN’ (on the right side Test)
⑤Pop-up Window, ‘Are you sure to exit from Equipment Test Mode? Click ‘Yes’
2. OPERATION SOFTWARE