Kramer K-Bar User manual

K-Bar Camera Bracket Quick Start
P/N:
2900- 301538QS
Rev:
1
Scan for full manual
K-Bar Camera Bracket Quick Start Guide
This guide helps you install and use your K-Bar Camera Bracket for the first time.
Go towww.kramerav.com/downloads/K-Bar todownload thelatest user manualand checkif firmware
upgrades are available.
Step 1: Check what’s in the box
K-Bar Camera Bracket
1 Quick start guide
Step 2: Get to know your K-Bar Camera Bracket
Step 3: Mount Camera Bracket
Attach the Camera Bracket to the lower part of K-Bar to mount the camera onto a display.
To attach the Camera Bracket:
1. Attach the Camera Bracket to the lower part of the
K-Bar, using the screw supplied with the K-Bar wall
mount kit (included in the K-Bar package).
2. Once the bracket is connected, move the bracket handle
to the desired angle.

 

3. Place the K-Bar onto the display.
4. Press the handle against the rear side of the display to
ensure that the bracket is tightly secured.
•Before moving the display, take care to remove the Camera Bracket to prevent the K-Bar from falling.
•Once installed, do not move the bracket to the sides or push it in any way.
•Ensure that the environment (e.g., maximum ambient temperature & air flow) is compatible for the device.
•Avoid uneven mechanical loading.
•Reliable earthing of rack-mounted equipment should be maintained.
Technical Specifications
Environmental
Conditions
Operating Temperature
0° to +40°C (32° to 104°F)
Storage Temperature
-40° to +70°C (-40° to 158°F)
Humidity
10% to 90%, RHL non-condensing
Regulatory
Compliance
Safety
CE
Environmental
RoHs, WEEE
Enclosure
Type
Aluminum
General
Net Dimensions (W, D, H)
15.9cm x 14.2cm x 1.3cm (6.3" x 5.6" x 0.5")
Shipping Dimensions (W, D, H)
17.5cm x 14.7cm x 2.5cm (6.9" x 5.8" x 1")
Net Weight
0.28kg (0.6lbs) approx.
Shipping Weight
0.33kg (0.7lbs) approx.
Specifications are subject to change without notice at www.kramerav.com