10 11
Troubleshooting
• If you cannot connect the earphones to your device, please try
the following:
– Ensure that the earphones are charged, switched on, paired with
and connected to your device
– Check the earphones are within 10 metres (30 feet) of your device
and that there are no obstructions (such as walls or other electronic
devices) between the earphones and the device
– Only one device may be paired to these earphones at a time, so
please ensure there are no conicting wireless devices trying to
connect to the earphones
• If the earphones will not switch o, they can be reset back to normal
by putting them on charge
• If you receive an intermittent signal, please ensure the earphones are
fully charged before continuing use
• If you do not use the earphones for longer than 3 minutes whilst
not connected to a device, they will automatically power o to
conserve power
We hope you’ve now got all the information you need to get started, but
if you’re having problems with anything, please feel free to contact us
Hereby, Kondor Ltd declares that the radio equipment type,
KSRIBB Ribbons Wireless Earphones, is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following
internet address: http://kondor.co.uk/product-documents.
Please do not attempt to open this product. There are no user serviceable parts inside, in
particular if your product has an embedded, non-replaceable battery, do not attempt to
access or remove the battery as this may cause personal injury and will damage the product.
Making any attempt to open the product or carry out repair voids any and all warranties.
We apologise for any inconvenience caused by minor inconsistencies in these instructions,
which may occur as a result of product improvement and development.
