KS KitSound IMMERSE 75 User manual

JB. 6798-a / REG05 / Made in China. © KitSound is a trademark of Kondor Limited, 2019. Christchurch, Dorset, BH23 4FL, UK
The Bluetooth®word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such
marks by Kondor Ltd. is under license. Other trademarks and trade names are those of their respective owners.
All trademarks are acknowledged as the property of their respective owners. Unless otherwise stated their use does not
imply that the trademark owner is aliated with KitSound or endorses the products herein.
Products showing the ‘Crossed Through’ wheelie bin symbol must be recycled separately from household waste at the
end of their useful life. Please DO NOT dispose of this appliance in normal household waste. Your local appliance retailer
may operate a ‘take-back’ scheme when you are ready to purchase a replacement product, alternatively contact your
local government authority for further help and advice on where to take your appliance for recycling.
Please recycle this packaging responsibly.
kitsound.co.uk
USER MANUAL
IMMERSE 75
ACTIVE NOISE CANCELLING
WIRELESS HEADPHONES

4 5
Box contents
• Immerse 75 Active Noise Cancelling (ANC) Wireless Headphones
• Micro USB to 3.5 mm audio cable
• Micro USB charge cable
• User manual
• Carry pouch
Functions
1. MFB (Multi-function Button)
2. Volume+/Next Track
3. Volume–/Previous Track
4. LED Indicator
5. Micro USB Charging Port
6. Microphone
7. ANC LED
8. ANC Button
Getting started
1. Press and hold for 4 seconds
2. Connect to ‘KS Immerse 75’
3. Play your music
1
4
2
3
5
6
7
8
Note: For the purposes of this manual, “ANC” is shorthand for “Active Noise Cancelling”.
Further information is provided in the following pages of this manual.

6 7
Note: The next time you switch the headphones on they will automatically search for and attempt to
connect to the last paired device.
Note: If the music device is taken further than the transmission range of the headphone (10 metres) the
headphone will enter a “link-loss” state. The headphone will be able to automatically re-pair to the music
device when it comes back within the acceptable range. The link-loss period will last 10 minutes, if the
device does not come back within range the headphone will begin searching for a new device.
Note: If no connection is made with the headphones for more than 20 minutes the headphone will power o.
Removing pairing records
1. From standby mode, hold MFB (1) together with Volume+ (2) for 5 seconds to delete pairing records
Re-pairing or pairing new devices
1. Turn Bluetooth connectivity o on any previously paired devices or remove pairing record as stated in
the previous section of this manual
2. Follow the ‘Pairing the headphones to your device’ instructions from step 1
Instructions for use
Getting started
Charging the battery
Give the headphones a full charge before their rst use
1. Connect the micro USB charge cable to the Micro USB Charging Port (5) and plug into power
2. The LED Indicator (4) will be red whilst charging which will take up to 3 hours
3. Once fully charged the LED Indicator (4) will turn o
Note: The rst charge may take up to 3.5 hours to complete.
Note: The LED Indicator (4) will ash red and a low battery tone will sound every 5 minutes to show low
battery status, indicating that a recharge is required.
Pairing the headphones to your device
1. Hold the MFB (1) down for 4 seconds. You will see the LED Indicator (4) ash white and enter pairing mode
2. Turn on your iOS, Android, or Windows device’s Bluetooth ON and search for new devices
3. Select “KS Immerse 75” from the list of found devices. If asked for a passcode, enter ‘0000’ and the
device will pair
4. Once connected, an audio tone will sound and the LED Indicator (4) will ash white every 10 seconds.
You can then answer the phone or listen to your music
5. To power o the headphone, hold MFB (1) down for 3 seconds. You will see the LED Indicator (4)
ash red for 1 second before turning o

8 9
Call handling
Answer a call Press MFB (1) to answer. You can adjust the volume by using Volume+ (2) or
Volume– (3)
Reject a call Hold MFB (1) for 1 second to reject the incoming call
End call Press MFB (1) while in the call to end it
Redial Press MFB (1) twice in quick succession to redial the last phone number you
called on your device
Mute microphone Press MFB (1) twice in quick succession whilst in a call to mute the microphone
and repeat to unmute the microphone
Switch microphone Hold Volume+ (2) for 1 second in order to switch between the headphone
microphone to the microphone of the handset
Voice dialling Hold MFB (1) for 1 second and wait for audio tone before giving voice
command to device.
Note: This feature requires a compatible IOS or android handset
Playing music
Bluetooth
Play/Pause Press MFB (1)
Adjusting the volume Press Volume+ (2) or Volume– (3).
The volume can also be controlled on your device
Changing track Press and hold Next Track (2) or Previous Track (3)
Wired use
1. Turn o the headphones
2. Plug the micro USB to 3.5 mm audio cable into the Micro USB Charging Port (5) and the other end into
your device
Note: All functions are controlled via your device.

10 11
Noise Cancellation
The ANC Button (8) can be used to toggle the active noise cancellation on and o when using
the headphones.
When ANC is turned on, the ANC LED (7) will shine green.
ANC on/o (with
Bluetooth audio)
Upon start-up the headphones will enter Bluetooth mode with ANC automatically
turned on.
Short press ANC Button (8) to toggle ANC mode on/o.
Bluetooth mode will automatically enter standby after 20 minutes without a signal.
ANC will continue to work, please be sure to manually turn o ANC after use.
ANC on/o
(without
Bluetooth audio)
Whilst the headphones are powered o, short press ANC Button (8) to toggle ANC
mode on/o. In this mode the headphone will reduce background noise after without
the use of the Bluetooth music function.
Note: User must manually turn o the ANC in this mode after use to conserve battery.
Note: The Bluetooth mode and ANC mode of the headphones operate separately, this enables the user
to continue cancelling noise even when the music playback has nished. Perfect for sleeping on long
journeys. Please always be sure to check the ANC status of the headphone after use and turn o the
ANC function manually when powering o the headphones.
Specications
Bluetooth®technology v5.0
Bluetooth connectivity distance up to 10 m
Frequency band 2.402-2.480 GHz
Transmission power 4 dBM (conducted)
S/N 80 dB +/– 2 dB
Frequency response 20 Hz – 20 kHz
Drivers 40 mm
Output RMS 10 mW / 32 Ω
Battery LiPo
Play time up to 15 hours (ANC + Bluetooth at 70% vol)
up to 30 hours (Bluetooth only at 70% vol)
Charging time up to 3 hours
IP rating none
Working temperature -10°C ~ +55°C
Headphone (mm) H195 x W135 x D73
Cable length 0.8 m
Weight 257 g

12 13
FCC ID: 2ADFF-KSIMM75
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Warning: Changes or modications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment o and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
Troubleshooting
We hope you’ve now got all the information you need to get started, but if you’re having problems
with anything, please feel free to contact us at: suppor[email protected].uk
Hereby, Kondor Ltd declares that the radio equipment type, Immerse 75,
is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following
internet address: http://kondor.co.uk/product-documents.

14
We are sorry for any inconvenience caused by minor inconsistencies in these instructions, which may occur as a result of product
improvement and development.
The use and operation of this speaker is beyond our control. Warranty of the KS Immerse 75 is limited to defects caused by faulty
manufacture or defects in materials only. No warranty whatsoever is given or implied for damage caused by the user under any circumstances.
This does not aect your statutory rights.
Please do not attempt to open this product. There are no user serviceable parts inside, in particular if your product has an embedded,
non-replaceable battery, do not attempt to access or remove the battery as this may cause personal injury and will damage the product.
Making any attempt to open the product or carry out repair voids any and all warranties.