KS BOOGIE BUDDY User manual

USER MANUAL
JB. 6094-a / Made in China. © KitSound is a trademark of Kondor Limited, 2018.
Christchurch, Dorset, BH23 4FL, UK
All trademarks are acknowledged as the property of their respective owners.
Unless otherwise stated their use does not imply that the trademark owner is
aliated with KitSound or endorses the products herein.
Products showing the ‘Crossed Through’ wheelie bin symbol must be recycled
separately from household waste at the end of their useful life. Please DO NOT
dispose of this appliance in normal household waste. Your local appliance
retailer may operate a ‘take-back’ scheme when you are ready to purchase a
replacement product, alternatively contact your local government authority for
further help and advice on where to take your appliance for recycling.
Please recycle this packaging responsibly.
BOOGIE BUDDY
BLUETOOTH®
SPEAKER
kitsound.co.uk

Please read this manual carefully before use.
Box contents
• KS Boogie Buddy Bluetooth speaker
• USB charge cable
• User manual
Functions
1. Multi-function button (MFB)
2. Volume+ / Next track
3. Volume– / Previous track
4. Micro USB charging port
5. LED indicator
6. Micro SD card slot
1
2
3
5
4
2 3
6

4 5
Pairing the speaker to your device
1. Press the MFB (1) to turn the speaker on. It will enter pairing
mode, with the LED indicator (5) ashing blue quickly
2. Turn your iOS, Android, or Windows device’s Bluetooth
ON and search for new devices
3. Select ‘KS Boogie’. If asked for a passcode, enter ‘0000’,
and the device will pair. The LED indicator (5) will be solid
blue once device paired
Instructions for use
Charging the speaker
Give the speaker a full charge before its rst use.
1. Connect the USB charging cable supplied, to the Micro
USB charging port (4) and plug into power
2. The LED indicator (5) will be red whilst charging which
will take up to 2 hours
3. Once fully charged the LED indicator (5) will turn o
Note: Allow up to 3 hours for the rst charge.

6 7
Re-pairing or pairing new devices
1. Turn Bluetooth connectivity o on any previously
paired devices
2. Follow the ‘Pairing the speaker to your device’ instructions
3. If a previously paired device is not present within the
Bluetooth range then the speaker will re-enter
pairing mode
Call handling
Answer a call short press MFB (1) to answer
Decline a call long press MFB (1) to decline
Using a Micro SD Card to play music on
your speaker
1. Press the MFB (1) to turn the speaker on. Insert a micro SD
card into the Micro SD card slot (6)
2. The music on the micro SD card will automatically begin
to play
3. If you want to switch back to Bluetooth mode – double
click the MFB (1) and follow the ‘Pairing the speaker to
your device’ instructions

8 9
Playing music on your speaker
When connected via Bluetooth, play the music on your
device and the sound will play through the speaker. Some
devices may require you to select the audio output.
Play/Pause Press MFB (1)
Volume +/– Short press Volume+ (2) or
Volume– (3). The volume can also
be adjusted on your device
Track change Long press Next track (2) or
Previous track (3). You can also skip
tracks on your device
Please note:
Your device will have an internal amplier and if it is playing
digital les like MP3s it will also have an integrated DAC
(Digital Audio Converter). If you turn the volume up to 100%,
your device will be sending a distorted signal. To avoid this,
and to get the best quality from the speaker, we recommend
that you do not run your device any higher than 95% volume.
Some devices output higher than others, so you may need
to reduce the volume if you experience distortion.

10 11
Care for your Boogie Buddy
Please DON’T:
• Submerge the Boogie Buddy speaker in water
• Drop the Boogie Buddy speaker as this will invalidate
your warranty
• Open up the Boogie Buddy speaker. There are no user
serviceable parts inside
• Expose the Boogie Buddy speaker to extreme
temperatures or rapid changes of hot to cold
or vice versa
Please DO:
• Clean the Boogie Buddy speaker with a soft dry cloth
and no detergents
Works with Bluetooth V4.1
Bluetooth connectivity distance up to 10 m
S/N ≥ 85 dB
Frequency response 150 Hz – 20 kHz
Drivers 1 x 40 mm
Play time up to 3 hours
Charging time up to 2 hours
Maximum Micro SD card size 32 GB
Specications

12 13
Troubleshooting
We hope you’ve now got all the information you need to get
started, but if you’re having problems with anything, please
feel free to contact us at: [e-mail]
Hereby, Kondor Ltd declares that the radio equipment type,
KSBOG Boogie Buddy Bluetooth speaker, is in compliance
with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available
at the following internet address:
http://kondor.co.uk/product-documents
The use and operation of this speaker is beyond our control. Warranty of the
KS Boogie Buddy is limited to defects caused by faulty manufacture or
defects in materials only. No warranty whatsoever is given or implied for
damage caused by the user under any circumstances.
This does not aect your statutory rights.
Please do not attempt to open this product. There are no user serviceable
parts inside, in particular if your product has an embedded, non-replaceable
battery, do not attempt to access or remove the battery as this may cause
personal injury and will damage the product.
Making any attempt to open the product or carry out repair voids any and
all warranties.

14
We apologise for any inconvenience caused by minor inconsistencies in
these instructions, which may occur as a result of product improvement
and development.
The Bluetooth®word mark and logos are registered trademarks owned by the
BluetoothSIG, Inc. and any use of such marks by Kondor Ltd. is under license.
Other trademarks and trade names are those of their respective owners.