Kuk Je Tong Shin KHM-210R User manual

1
KUK JE TONGSHIN CO., LTD.
Bluetooth Mono Headset
(KHM-210R) User Manual

2
KUK JE TONGSHIN CO., LTD.
Table of contents
Power on
Power off
Charging
Low battery
Pairing
Connect
Volume control
Call usage
- Answering a call
- Making a call
- Ending a call
- Call waiting
- Transferring a call
Specification

3
KUK JE TONGSHIN CO., LTD.
Power on
- Press and hold the PWR/END key for 3 seconds
ÎThe power will turn on and a booting tone will play .
Power off
- Press and hold the PWR/END key for 3 seconds.
ÎA shutdown tone will play, the Bluetooth link will be disconnected,and the power will turn off.
Charging
- Remove the cover on the charging port and connect the charger.
- When the charger is connected with power on or off, the headset will turn off. While charging, the LED
indicator will show a solid blue light.
- When charging is complete, the LED indicator will turn off.
- It takes 3 hours to fully charge the headset.
-
Low battery
The LED indicator will blink blue when the battery power is low.
When the battery is not charged, the LED indicator will be blinked blue and then turn off.
When this occurs, the battery needs to be charged.
Pairing
- With the KHM-210R off, press and hold the PWR/END button for 6+ seconds.
ÎYou will hear a short beep and the LED indicator will be blinked blue,
when the device enters Pairing Mode.
►Using your handset, find the Bluetooth Menu and “search for” or “add” new devices.
►Select “KHM-210R” from the list of devices and pair it with your handset.
ÎWhen asked for the Pass/PIN code during the pairing procedure, please enter “0000” (4 Zeros).
ÎOnce pairing has completed successfully, you will hear a beep
- ►After pairing successfully, be sure to “Connect” to the KHM-210R
- If you want to pair with other devices in the future, the headset must be in Pairing Mode.
- If it will be not connected the “Pairing” for five minutes, it will be turned off.

4
KUK JE TONGSHIN CO., LTD.
Connecting
[ Call connection ]
- Briefly press the PWR/END key to activate “Voice Command”**
**Your handset must support the Voice Command function.
ÎPress the PWR/END key for 1 seconds to activate last number redial. The headset will enter “Redial”
and call the most recent number after making a beep.
- To end a call, press the “PWR/END”.
[ Auto Reconnect ]
- When the KHM-210R and your handset are separated by a distance of 33 feet (10meters) or more, the
headset and handset will disconnect. When the handset and KHM-210R are brought back within the
required distance, the KHM-210R will automatically reconnect with the handset.
- If the headset and handset do not automatically reconnect when they are back within the required range,
briefly press the PWR/END key to reconnect manually.

5
KUK JE TONGSHIN CO., LTD.
Volume control
- Press the VOLUME UP or VOLUME DOWN key to adjust the speaker volume.
- There are eight levels of speaker volume.
Calling
Answering a Call
- When there is an incoming call, the headset will ring.
- Press the PWR/END key to answer an incoming call.
Making a Call
[ Voice Command ]
Briefly press the PWR/END button.
(* It is possible to use these functions only when your Handset supports them.)
[ Last Number Redial ]
Press and hold the PWR/END button for 1seconds until beeping sound is heard.
Ending a call
Briefly press the PWR/END button.
Call waiting
- Answer a second call without hanging up the first call by pressing the PWR/END button for 1 seconds.
Press the PWR/END button for 1 seconds to return to the original call.
- Press the PWR/END button to terminate both calls at once.
* It is possible to use these functions only when your Handset supports them. For further information
about using these features. Please consult your Handset’s user manual.
Transferring a call
While on a call, briefly press the PWR/END button for transferring the audio to the headset.

6
KUK JE TONGSHIN CO., LTD.
Specification
ITEM Description
Bluetooth Specification V2.0
Supported Profile Handsfree / Headset
Battery 3.7V, Li-Polymer
Headset Receiver 32Ω/ 10pi
Headset Mic -40dB / Omni directional
Talk Time Up to 5 Hours
Operating Temperature -10 ℃~ 50 ℃
Dimension 50 mm (L) X 17.1 mm (W) X 9.6mm (H)

7
KUK JE TONGSHIN CO., LTD.
Declaration of confirmation
FCC
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. Operation is subject to the following two conditions;
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority
to operate the equipment.
IMPORTANT NOTE: To comply with RF exposure requirements, this device may not be co-located with any other transmitter or
antenna.
CE:
Hereby, KUK JE TONG SHIN CO., LTD., declares that this KHM-210 is in compliance with the essential requirements and other
relevant provisions of Directive 1999/5/EC. The declaration of conformity may be consulted at www.address.com/DoC.pdf.