Motorola MOTOPURE H15 User manual

Quick Start Guide
H15
MOTO
Motorola H15
PURE
TM
/ 快速使用手册

1
BEFORE YOU BEGIN
1CHARGE Your Headset's Battery
2START BLUETOOTH FEATURE Your Phone
3PAIR Your Headset and Phone
4TEST AND USE
USING A SECOND PHONE?
TIPS FOR USING H15 WITH TWO PHONES
TURNING HEADSET ON AND OFF
EAR CUSHIONS AND YOUR HEADSET
WEARING THE HEADSET
CHANGING FOR USE ON OTHER EAR
QUICK BATTERY CHECK
USING YOUR DESKTOP CHARGER
MAKING CALLS
AUDIO TONES
INDICATOR LIGHT
TROUBLESHOOTING
European Union Directives Conformance Statement
Contents
2
3
6
7
9
10
11
12
13
15
16
17
18
19
21
22
26
30

2
BEFORE YOU BEGIN
Before using this product, read the Important Safety and Legal Information pamphlet and
follow its instructions.
Take a moment before you get started to familiarize yourself with your new
MOTOPURE H15 Bluetooth®Handsfree Headset. Along with your headset, a
desktop charger is provided for both charging and storage.
Call
Button
Volume Up
Button
Speaker
Power
Indicator
Light
Headset Charging
Connector
Charger
Port
Multi-Color
Indicator Light
Boom
Volume Down
Button

3
Remove plastic seal off of ear cushion on speaker.
Plug the Motorola charger into the end of the headset.
The indicator light turns red when the battery is charging. It may take up to
1 minute for the indicator light to turn on. When the headset’s battery is fully
charged (about 2 hours), the indicator light turns green.
Disconnect the charger.
1 CHARGE Your Headset’s Battery
You need to charge your headset using the included travel charger or desktop
charger.
1
2
3
Charging with travel charger:
Note: Headset is not functional while charging with travel charger.

4
Plug in the travel charger into the charger port.
Plug the headset into the port on the desktop charger as shown.
The desktop charger light is lit, and the headset indicator light turns red when
the battery is charging. It may take up to 1 minute for the headset indicator
light to turn on. When the headset’s battery is fully charged (about 2 hours),
the headset indicator light turns green.
1
2
Charging with desktop charger:
1 CHARGE Your Headset’s Battery

5
Remove headset from charger when ready to use.
3
Note: Headset is functional while charging with desktop charger with the boom open. To
operate, remove from charger.
Note: This product uses a lithium ion, rechargeable, non-replaceable battery. Under normal
use, the expected life of the rechargeable battery is approximately 400 charges.

6
Press (Menu) > Settings > Connection > Bluetooth Link > Setup.
Scroll to Power.
Select Change.
Scroll to On.
Press Select to turn on the Bluetooth feature. The Bluetooth feature remains
on until you turn it off.
Note: These steps are for most Motorola phones. For other phones, see your phone’s
user’s guide.
2 START BLUETOOTH FEATURE Your Phone
Your phone’s Bluetooth feature is off by default. To use your headset, you must
turn on the Bluetooth feature in your phone.
For most Motorola phones (at the main menu):
1
2
3
4
5

7
3 PAIR Your Headset and Phone
Before you can use your headset, you must pair (link) it with your phone.
Step A - ENSURE HEADSET IS IN PAIRING MODE
Open the headset boom to power on the headset and initiate pairing. The
indicator light first flashes during power up, then initiates easy pairing. After a
few moments, the indicator light will be steadily lit in blue to indicate headset is
in pairing mode.
Indicator Light
(steadily blue
for pairing mode)

8
On your Motorola phone, press (Menu) > Settings > Connection > Bluetooth
Link > Handsfree > Look for Devices.
The phone lists Bluetooth devices it finds.
Select Motorola H15.
Select OK or Yes to pair your headset with your phone.
Enter the passkey: 0000
Select OK.
When your headset successfully pairs with your phone, the indicator light
flashes purple and blue.
Note: These steps are for most Motorola phones. For other phones, see your phone’s
user’s guide.
3 PAIR CONTINUED Your Headset and Phone
Step B - SET YOUR PHONE TO LOOK FOR YOUR HEADSET
For most Motorola phones:
1
2
3
4
5

9
Place the headset over your ear. See “Wearing the Headset” on this guide.
On the phone, dial the number you want to call and press SEND key on your
phone.
If your phone and headset are successfully paired, you will hear ringing on
the headset.
4 TEST AND USE
Your phone and headset are now paired and ready to make and receive calls. To
confirm they are operating properly, make a call:
1
2
3
After you have successfully paired your phone and headset, you don’t need to
repeat these steps. For daily use, ensure that your headset is turned ON and that
your phone’s Bluetooth feature is ON.
To conserve power, close the boom to turn your headset off. Re-open the boom
to make a call.

10
Turn off any phones or devices that are already paired with your headset.
Turn off your headset by closing the headset boom.
Perform Step 2 (“Start Bluetooth Feature”), Step 3 (”Pair”), and Step 4
(”Test and Use”) to pair your headset with your second phone. Your most
recently paired phone is now your primary phone for voice dial functionality.
To connect to both phones, turn on first phone.
Close the headset boom and then re-open it. The headset automatically
connects to both phones. The last paired phone is now your primary phone
for voice dial functionality.
USING A SECOND PHONE?
Multipoint technology allows you to make and receive calls from two Bluetooth
enabled devices like your personal and business phones.
To pair a second phone to your headset, follow these steps:
1
2
3
4
5

11
TIPS FOR USING H15 WITH TWO PHONES
Use the following tips when using H15’s multipoint technology:
Incoming calls can be answered from both phones:
– When answering a call, the idle phone is disconnected from the
headset.
– When the call ends, the idle phone is automatically reconnected to
the headset.
Last number redial dials the last outgoing call made from the primary
phone.
Voice dial is accessible from either phone via different key actions:
– For your primary device (last paired phone), tap the Call button until
you hear the tone.
– For your secondary device (other paired phone), tap the Call button
and either Volume button until you hear the tone.

12
flashes blue slowly after flashing purple/blue (if paired and connected with a
phone), or
becomes steady blue (if ready to be paired).
TURNING HEADSET ON AND OFF
To turn ON your H15, open the headset boom. The indicator light first flashes
blue three times, then:
To turn OFF your H15, close the headset boom. The indicator light will turn off.
Boom
Open To Turn On
Close To Turn Off

13
EAR CUSHIONS AND YOUR HEADSET
Your H15 headset is supplied with multiple ear cushions. Your headset’s
performance is greatly dependent upon achieving a good fit on your ear.
Therefore, we recommend trying all the supplied ear cushions with your headset.
The ear cushion is fitted onto the end of your headset’s earpiece speaker like
shown, and placed onto your ear when using your headset.

14
EAR CUSHIONS AND YOUR HEADSET
When fitting an oval-shaped ear cushion on your headset, be sure the cushion is
oriented, as shown below (pointing towards the microphone).

15
WEARING THE HEADSET
To wear your headset, flex the earhook and loop it over your ear, as shown.
Be sure to position the ear cushion into your ear canal for optimal audio
performance and comfort.

16
Gently lift and pull the top of the earhook
up and off speaker stem, as shown.
Flip the headset over.
Attach the earhook to the speaker stem,
as shown.
CHANGING FOR USE ON OTHER EAR
You can wear your H15 headset on your left or right ear. The headset comes
ready for the right ear. To change the headset for the left ear:
1
2
3

17
QUICK BATTERY CHECK
When not in a call or connected, press and release both Volume buttons.
The indicator light displays charge status until you release the buttons. See
below for details on indicator light and available talk time based on charge status.
Headset Indicator Available Talk Time
Red Less than 1 hours
Yellow 1 to 3 hours
Green Greater than 3 hours

18
USING YOUR DESKTOP CHARGER
While in the desktop charger, the headset remains on and still connected to the
phone.
When there is an incoming call, simply take headset off the desktop charger to
answer the call.

19
Function Action
Make a voice dial call Tap the Call button and speak
(Primary phone) the name after the tone
Make a voice dial call Tap the Call button and either
(Secondary phone) Voume button and speak the
name after the tone
End a call Tap the Call button, and hear a
high-to-low tone
Answer a call Open the boom or tap the call
button (if boom is ready open),
hear a low-to-high tone
Reject a call Press and hold either Volume
button until you hear a tone
MAKING CALLS
Note: Some features are phone/network dependent.