Samsung WEP900 User manual

World Wide Web
http://www.samsungmobile.com
Printed in Korea
Code No.:GH68-XXXXXA
EU A. XX/2008. Rev. 1.0

English ............................................................. 1
Français ......................................................... 18
Deutsch .......................................................... 37
Nederlands..................................................... 56

English
1
Contents
Getting started
Your headset overview ....................................................3
Button functions.............................................................4
Charging the headset......................................................5
Wearing on the headset...................................................9
Using your headset
Turning the headset on or off ......................................... 10
Pairing and connecting the headset................................. 11
Using call functions....................................................... 13
Connecting the headset with other devices....................... 15
Appendix
Frequently asked questions............................................ 17
Warranty and parts replacement..................................... 19
Correct disposal of this product ...................................... 20
Correct disposal of batteries in this product...................... 21
Specications............................................................... 22

2
Take the time to read through this user guide before you start to use
WEP900 Bluetooth Headset.
Bluetooth®is a registered trademark of the Bluetooth SIG, Inc.
worldwide—Bluetooth QD ID: Bxxxxxx
More information about Bluetooth is available at www.bluetooth.com.
Safety precautions
Never disassemble or modify your headset for any reason. Doing this
may cause the headset to malfunction or become combustible. Bring
the headset to an authorised service centre to repair it or replace the
battery.
When using your headset while driving, follow local regulations in the
country or region you are in.
Avoid storage at high temperatures (above 50° C/122° F), such as in
a hot vehicle or in direct sunlight, as this can damage performance
and reduce battery life.
Do not expose the headset or any of its supplied parts to rain or other
liquids.
At very high volumes, prolonged listening to the headset can damage
your hearing.
•
•
•
•

English
3
Getting started
This section explains what to remember for the proper use of your
Bluetooth headset.
Your headset overview
Make sure you have the following items with your headset :
Charger, User guide, Leather case.
The items supplied with your headset may vary depending on your region.
Earpiece
Volume down
button
Indicator light
Ear hook
Volume up
button
Talk button
Charger jack
Microphone
Power button

4
Button functions
Power button
Press and hold to turn the headset on or off.
Talk button
Press to make or answer a call.
Press to end a call.
Press and hold to enter Pairing mode.
Volume up/down buttons (touch buttons)
Press to adjust the volume.
Press and hold both buttons at the same time to turn the indicator
light on or off.
Press and hold to turn the microphone on or off.
You can hear a beep when the volume level of the headset reaches to
the lowest or highest level.
Do not use the headset in humid places or with wet hands.
•
•
•
•
•
•
•
•
•

English
5
Charging the headset
This headset has a rechargeable internal battery which is non-
removable. Ensure that you fully charge the battery before using the
headset for the rst time.
Using the charger
1Plug the charger into the charger jack on the headset.
2Plug the charger into a power outlet.
During charging, the indicator light of the headset will turn red.
If charging does not begin, unplug the charger and plug it in again.
3When the headset is fully charged, the indicator light of the headset
changes to blue. Unplug the charger from the power outlet and the
headset.

6
Using the leather case
1Put the headset into place of the leather case which allows you to
charge the headset when on the move.
2Slide right the lock key.
During charging, the indicator light of the headset will turn red.

English
7
If you use the leather case to store the headset, slide left the lock
key.
3When the headset is fully charged, the indicator light of the headset
changes to blue. Remove the headset from the leather case.
Using the leather case and charger
1Put the headset into place of the leather case.
2Slide right the lock key.
If you use the leather case to store the headset, slide left the lock
key.
3Plug the charger into the charger jack on the leather case.

8
4Plug the charger into a power outlet.
During charging, the indicator light of the headset will turn red.
5When the headset is fully charged, the indicator light of the headset
changes to blue. Unplug the charger from the power outlet and the
leather case.
If you need to charge the leather case for later use, keep plugging
the charger. The leather case will be charged and the indicator
light of the leather case will turn red. When the leather case is fully
charged, the indicator light of the leather case changes to blue.
Use only a Samsung-approved charger. Unauthorised chargers may
cause an explosion or damage to the headset.
The battery will gradually wear out while charging or discharging because
it is a consumable part.
You cannot use the headset while charging the battery.
•
•
•
When the battery power is low
The headset beeps and the indicator light ashes red. Recharge
the battery. If the headsets powers off during a call, the call will be
automatically transferred to the phone.

English
9
Wearing the headset
Place the headset on your ear.
Depending on what ear you are going to wear the
headset, simply adjust the earpiece and microphone
accordingly.
Left Right

10
Using your headset
This section explains how to turn the headset on, pair and connect with
the phone, and use various functions.
Activated functions and features may differ depending on the types of
your phone.
Some devices, especially those that are not tested or approved by
Bluetooth SIG, may be incompatible with your headset.
•
•
Turning the headset on or off
To turn the headset on, press and hold the power button until the
blue indicator light ashes 4 times.
To turn the headset off, press and hold the power button until both
blue and red indicator lights ash.
•
•

English
11
Pairing and connecting the headset
Pairing will create a unique and encrypted wireless link between two
Bluetooth enabled devices, such as a Bluetooth phone and a Bluetooth
headset. To use the headset with other Bluetooth devices, both devices
must be paired. When trying to pair the two devices, keep the headset
and the phone reasonably close together. After pairing, you can connect
the two devices.
Pairing and connecting the headset with a phone
1Enter Pairing mode.
Press and hold the talk button until the indicator light turns blue
after ashing.
When you turn on the headset for the rst time, it automatically
enters Pairing mode.
2Activate the Bluetooth feature on your phone and search for the
headset (see your phone's user guide).
3Select the headset (Samsung WEP900) from the list of devices found
by your phone.

12
4Enter the Bluetooth PIN (0000, 4 zeros) to pair and connect the
headset to your phone.
Your headset supports the Simple Pairing feature which allows the headset
to be paired with a phone without requesting a PIN. This feature is
available when the phone is compliant with Bluetooth version 2.1 or higher.
Disconnecting the headset
To disconnect the headset from your phone,
Turn off the headset.
Use the Bluetooth menu of your phone.
Reconnecting the headset
When the headset is paired with a phone, it will attempt to automatically
reconnect each time you turn it on.
If the headset does not attempt to automatically reconnect,
Press the talk button.
Use the Bluetooth menu of your phone.
•
•
•
•

English
13
Using call functions
Making a call
Redialling the last number
Press and hold the talk button to redial the last number.
For some phones, pressing the key opens the call log list. Press the talk
button to dial the selected number.
Dialling a number by voice
Press the talk button to dial a number by voice, and say a name.
Answering a call
Press the talk button to answer a call when you hear incoming call tones.
Ending a call
Press the talk button to end a call.

14
Rejecting a call
Press and hold the talk button to reject a call when a call comes in.
Using options during a call
You can use the following functions to control your call during a call.
Transferring a call from the phone to the headset
Press the talk button to transfer a call from the phone to the headset.
Placing a call on hold
Press and hold the talk button to place the current call on hold.
Answering a second call
Press the talk button to end the rst call and answer a second call when
you hear call waiting tones.
Press and hold the talk button to place the rst call on hold and answer
a second call when you hear waiting tones.
To switch between the current call and the held call, press and hold the
talk button.

English
15
Connecting the headset with a music device
You can separately pair and connect your headset with the phone and a
Bluetooth device that plays music les.
1Pair the headset with a phone. See page 11.
2If successful, press and hold the talk button. The indicator light turns
on blue after ashing blue twice.
3Search for, pair, and connect with the music device you want
according to the device's user guide.
4Press the talk button to connect with the paired phone.
5When the phone and the device are successfully connected with the
headset, you can make or answer a call while you are listening to
music.
You can start, pause, and resume playback, and scan backward and forward
in a music le only in the connected music device.

16
Answering a call while listening to music
When a call comes in while listening to music, your headset will alert you
so that you can answer the call.
1When the headset sounds incoming call tones and the indicator light
ashes blue twice, press the talk button.
The music stops and you are connected with the caller.
2 When you have nished the conversation, press the talk button.
Your phone automatically begin playback after the call.

English
17
Appendix
Frequently asked questions
Will my headset
work with laptops,
PCs, and PDAs?
Your headset will work with devices that
support your headset’s Bluetooth version and
proles. For specications, see page 22.
Will anything cause
interference with
my conversation
when I am using
my headset?
Appliances such as cordless phones and
wireless networking equipment may cause
interference with your conversation, usually
adding a crackling noise. To reduce any
interference, keep the headset away from
other devices that use or produce radio waves.
Will my headset
interfere with my
car’s electronics,
radio, or
computer?
Your headset produces signicantly less power
than a typical mobile phone. It also only
emits signals that are in compliance with the
international Bluetooth standard. Therefore,
you should not expect any interference
with standard consumer-grade electronics
equipment.