TST-900 Quick Start Guide
The Kuma USB WiFi antenna is directional. You must direct the front of your
antenna towards the WiFi source you wish to connect to.
1. Connect your Kuma antenna to your Windows PC via the USB cable
provided.
2. One of two things will happen, either a pop up will appear or your
computer screen will remain the same. If a pop-up appears please go
down to
Section A
. If your computer screen remains the same, please
turn over to
Section B
.
Section A
3. On the pop-up window click “Run
setup.exe”.
4. It may ask you to run the program as an
administrator, if so, simply click “Yes”. Setup
will automatically install the software.
5. When the software has finished installing
(the install window will automatically close),
on the bottom right hand side of your
screen, select the WiFi icon.
6. Select WiFi 2 from the list at the top and
you will see a list of available networks to
connect to. Simply connect to a network
as you normally would.
Note: “WiFi” in the dropdown list is your computer's
built in WiFi adapter (if it has one) and “WiFi 2”
is the Kuma WiFi antenna. Depending on your
setup, you may find that the Kuma antenna
shows a different number to “WiFi 2”.
www.kuma.co.uk