Kumio ICE-1032Y User manual

INSTRUCTION MANUAL
ICE CREAM MAKER
Model: ICE-1032Y
THANK YOU FOR CHOOSING OUR ICE CREAM MAKER
PLEASE READ THE MANUAL CAREFULLY BEFORE OPERATING

- 2 -
IMPORTANT NOTICES
When using an electrical appliance, basic safety precautions should
always be followed to reduce the risk of fire, electric shock, and/or
injury, including the following:
1. Read all instructions before using.
2. Ensure the voltage is compliant with the voltage range stated on
the rating label, and ensure the earthing of the socket is in good
condition.
3. If the supply cord is damaged, it must be replaced by the
manufacturer or its service agent or a similarly qualified person
in order to avoid a hazard.
4. This appliance is not intended for use by persons (including
children) with reduced physical,sensory or mental capabilities, or
lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a
person responsible for their safety. Children should be
supervised to ensure that they do not play with the appliance.
This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have
been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance. Cleaning and user
maintenance shall not be made by children without supervision.
5. This appliance is intended to be used in household and similar
applications such as
–staff kitchen areas in shops, offices and other working
environments;
–farm houses and by clients in hotels, motels and other
residential type environments;
–bed and breakfast type environments;
–catering and similar non-retail applications
6. –Warning: Do not store explosive substances such as aerosol

- 3 -
cans with a flammable propellant in this appliance.
–Warning: Keep ventilation openings, in the appliance enclosure
or in the built-in structure, clear of obstruction
–Warning: Do not use mechanical devices or other means to
accelerate the defrosting process, other than those
recommended by the manufacturer
–Warning: Do not damage the refrigerant circuit.
–Warning: Do not use electrical appliances inside the food
storage compartments of the appliance, unless they are of the
type recommended by the manufacturer
–WARNING: When positioning the appliance, ensure the supply
cord is not trapped or damaged.
–WARNING: Do not locate multiple portable socket-outlets or
portable power supplies at the rear of the appliance.
–WARNING : When disposing of the appliance, do so only at an
authorized waste disposal centre. Do not expose to flame.
7. The refrigerant (R600a) is flammable.
8. Caution: risk of fire / Flammable materials
The refrigerant isobutene (R600a) is contained within the refrigerant
circuit of the appliance, a natural gas with a high level of
environmental compatibility, which is nevertheless flammable.
During transportation and installation of the appliance, ensure that
none of the components of the refrigerant circuit becomes damaged.
If the refrigerant circuit should be damaged:
Avoid opening flames and sources of ignition.
Thoroughly ventilate the room in which the appliance is situated.
9. The plug must be removed before cleaning, maintaining or filling
the appliance
10. Do not upend this product or incline it over a 45℃angle.
11. To protect against risk of electric shock, do not pour water on

- 4 -
cord, plug and ventilation, immerse the appliance in water or any
other liquid.
12. Unplug the appliance after using or before cleaning.
13. Keep the appliance 8cm from other objects to ensure the good
heat releasing.
14. Do not use the accessories which are not recommended by
Manufacturer.
15. Do not use the appliance close by flames, hot plates or stoves.
16. Do not switch on the power button frequently (ensure 5min.
interval at least) to avoid the damage of compressor.
17. Metal sheet or other electric objects are not allowed to be
inserted into the appliance to avoid fire and short circuit.
18. When take out the ice cream, do not knock the barrel or edge of
barrel to protect the barrel from damage.
19. Do not switch on the power before install well the barrel or
blender blade.
20. The initial temperature of the ingredients is 20±3℃. Do not put
the ingredients into freezer for pre-freeze, as it will easily make
the blender blade blocked before the ice cream is in good
condition.
21. Do not remove the blender blade when the appliance is on
working.
22. Do not use outdoors.
23. Never clean with scouring powders or hard implements.
24. There are two round copper sheets at the motor assembly of the
transparent cover installed on the upper cover. When using,
please wipe the water stains on the transparent cover and on the
copper plates. If the machine is in use, the two copper plates will
be connected by water, which will lead to power failure of the
motor. Pull out the power line, wipe the water stains, and restart
it.

- 5 -
25. Please keep the instruction manual.
SPECIFICATIONS
Model: ICE1032Y
Capacity: 1L
Voltage:AC 220-240V/50Hz
Anti-shock protection class: I
Climate type: N/SN
Power consumption: 100W（refrigeration），20W（ heating）
Max overall dimensions:355（L）X 260（W）X 227.5（H）mm
Max Packing Dimensions:398（L）X 300（W）X 256（H）mm
N.W: 16.31lbs/7.4kg
G.W:18.3lbs/8.3kg
PRODUCT FEATURE
1.Touch control, simple and reliable operation and won’t cost you
much trouble.
2. The LED display screen shows the working time.
3.Plastic housing, elegant, fashionable and lighter.
copper

- 6 -
4.Upper mixing and low noise.
5. With a variety of quick freezing ice cream production methods.
6 .The parts are detachable, easy to clean, sanitary and safe.
.PRODUCT INSTRUCTION…… ………………….... .. .. ....
1) Structure
Motor
Transparent lid
Mixing blade
Loading bowl
Top lid
Housing
Base

- 7 -
2) Control panel
Power button Mode selection Start/Stop
3) MENU
Single refrigeration mode
Single mixing mode
Ice cream mode
Yogurt mode

- 8 -
OPERATION
1. Connect the power supply and plug the power cord into a
suitable socket. The shape and voltage of the socket shall be the
same as those indicated.
2. Function description
1) Function description of buttons
①POW ER BUTTON
Plug in the power supply, press the power button to turn on the
machine, and press the power button again to shut down the
machine.
②FUNCTION SELECTIION BUTTON
By default, the ice cream machine is selected. Press it to cycle
between "single refrigeration", "single mixing" and "ice cream". But in
the working mode, this button is invalid.
③START/STOP BUTTON
Press the START button to select the working mode, and then press
it again to stop working. Note: refrigeration will be turned off after a
delay of 1 minute.
2) DESCRIPTIONS OF MODE
①Ice crea m m ode
After selecting the ice cream mode, press the " " button to start ice
cream making. If the " " button is pressed halfway, it will be
suspended, the mixing motor will stop working, and the refrigeration
function will stop working after 1 minute. If the " " button is pressed
again within 1 minute, the machine will enter the working state again.

- 9 -
If there is no operation, the machine will return to the standby state.
When the ice cream is finished, there will be 10 short beeps and it
will enter the insulation function automatically, 60 minutes in total.
Execute the cycle of turning off refrigeration for 10 minutes and
starting refrigeration for 6 minutes, the display screen displays
"COOL" icon, the icon of refrigeration mode flashes, and the icons of
other modes go out. After the insulation is completed, the buzzer will
sound 10 times and the machine will enter the standby state (The
icons of each mode will be on for a long time, and the countdown will
return to zero).
②Single refrigeration mode:
After selecting the single refrigeration mode, press the "" button to
start. The default time is 10 minutes. If the " " button is pressed
halfway, the refrigeration function will be suspended and stop
working after 1 minute. If the " " button is pressed again within 1
minute, the machine will enter the working state again. If there is no
operation, the machine will return to the standby state. After the 10
minute countdown is completed, there will be 10 beeps to remind
that the refrigeration is completed, and the machine will enter the
standby mode (The icons of each mode will be on for a long time,
and the countdown will return to zero).
③Single m ixing mode:
After selecting the single mixing mode, press the "" button to start.
The default time is 30 minutes. If the " " button is pressed halfway,
the single mixing function will be suspended. If the " " button is
pressed again within 1 minute, the machine will enter the working
state again. If there is no operation, the machine will return to the

-10 -
standby state. After the 30 minute countdown is completed, there will
be 10 beeps to remind that the mixing is completed, and the machine
will enter the standby mode (The icons of each mode will be on for a
long time, and the countdown will return to zero).
④Yogurt mode
Select yogurt mode, factory setting is 8 hours, display "08H". Press
START/STOP button, compressor, mixing motor and cooling fan
start, yogurt icon on the screen will be on for a long time, other icons
will be off. After the machine completes the yogurt mode, the
machine automatically enters the refrigeration mode, and the time
bar shows COOL. The compressor and fan motor start to work for 15
minutes, then whenever the temperature sensor detects that the
temperature is higher than or equal to 9 ℃, the compressor and fan
motor start to work for 4 minutes. If there is no other operation, the
machine will always be in refrigeration mode and will not shut down
automatically.
3. KEEP COOL FUNCTION
Ice cream insulation function: In order to prevent you from leaving
during the ice-cream making process, and the ice-cream can not be
eaten or stored in time after the completion of the production, which
causes the ice-cream to melt, we have added the following
humanized design: when the ice-cream making is completed but no
one operates, the compressor will automatically turn off for 10
minutes and turn on for 6 minutes, so as to maintain the fresh taste
and taste of the ice-cream texture. The holding time is 1 hour. During
this period, the indicator light of ice cream mode is flashing green.
When the ice cream mode is finished, there are 10 short beeps, and
the indicator light flashes red, and the machine is in standby mode.
4. MOTOR SELF-PROTECTION FUNCTION
4.1 The motor has overcurrent protection function. For example,
when the hardness of ice cream reaches the set value, it will stop
automatically.

- 11 -
4.2 In the ice cream mode and single mixing mode, if the motor
components are not installed in place, the buzzer will give an alarm
every 30s and sound 10 times, which will last for 10 times. If the
motor components are not installed in place after that, the machine
will enter the standby state.
5. COMPRESSOR SELF-PROTECTION FUNCTION
After the compressor stops, the restart time must be greater than or
equal to 3 minutes. If the restart time is less than 3 minutes, it will
start automatically after 3 minutes.
6. CONTROLLING THE VOLUME OF THE INGREDIENTS
To avoid overflow and waste, please make sure that the ingredients
do not exceed 60% of capacity of the removable bowl (Ice cream
expands when being formed).
Yogurt is recommended not to exceed 80% of the inner barrel
volume.
HOW TO MAKE ICE CREAM
NOTE: Please thoroughly clean all parts that will contact with ice
cream before use, including: cooling bowl, loading bowl, mixing fan
blade, transparent lid, etc.
Before cleaning, you must ensure that the power cord plug is
disconnected from the outlet. When making ice cream, keep the
machine flat on a level surface to ensure that the compressor of the
machine is working properly.
Here are the steps to make an ice cream:
Step 1.
Pour the well prepared recipe ingredients in proportion into the
removable bowl, then have a uniform mixing.

-12 -
Make according to the following formula.
After mixing the formula mixture evenly,
it can be made into ice cream within
60 minutes.
Cream: 180g
Powdered Milk: 120g
Water: 200g
Step 2.
Then put the loading bowl into the ice cream machine, both ends of
the loading bowl handle shall be aligned with the groove of the upper
cover.
Installation
position of
loading bowl

-13 -
Step 3.
Install the transparent lid and motor components.
Step 4.
Install the mixing fan blade, transparent lid and motor components
Step 5.
Put the components installed in step 4 into the ice cream machine,
make sure that the center of the convex hull of the loading bowl and

-14 -
the motor components of the mixing fan blade are in the same
straight line, lock the components clockwise, and make sure that the
triangle mark on the components rotates to the "LOCK" mark.
Step 6.
Plug in the power supply, touch the POWER button for 1 second, the
machine starts up, the ice cream mode indicator light is flashing red,
touch the START/STOP button, the indicator light is on green, and
start to make ice cream.
Lock

-15 -
Step 7.
When the ice cream is finished, touch the power button for 1 second,
and the machine will shut down.
Step 8.
Turn the transparent lid and motor components anticlockwise. In the
process of spinning out, there will be a slight friction sound, which is
normal. When the triangle mark is aligned with the unlocking mark,
take out the components and then take out the loading bowl.

HOW TO MAKE YOGURT
Material preparation:
Add the raw materials into the container according to the following
proportion and mix well.
Formula 1: 600 ml cold storage fresh milk + starter or 50 ml cold
storage pure yogurt.
Formula 2: 600 ml sterile pure milk + starter or 50 ml cold storage
pure yogurt,
Formula 3: 600 ml milk (which is made from milk powder) + starter or
50 ml cold storage pure yogurt.
NOTES:
Before adding the above ingredients, please check whether they
are expired or deteriorated.
The addition amount of lactic acid bacteria starter is in
accordance with the instructions of starter.
When filling milk powder, please brew according to the
proportion marked on the market milk powder, or according to
the proportion of 150ml milk powder + 450ml water.
The fermentation time will be affected by the environment
temperature and the initial temperature of raw materials, so the
fermentation time should be extended when the environment
temperature is low or the milk is refrigerated. But the longest
time is not more than 14 hours (when pure yogurt is used as
fermentation source, the longest time is not more than 10 hours).
Suggestion: the active lactic acid bacteria starter is preferred as
the fermentation source, and the commercially available pure
yogurt or the last self-made pure yogurt can also be used as the
fermentation source when the starter is inconvenient to
purchase.
- 16-

-17 -
Fermentation steps:
Plug in the power, press the power button, the machine starts, the
default ice cream mode icon flashes, press the to select the
yogurt function, press the START/STOP button, the yogurt mode
icon will be on for a long time, and start to make yogurt.
Retain freshness:
Just fermented yoghurt can be eaten immediately, but the yoghurt
has not reached the best taste at this time. For those who do not
accept refrigerated food, they can be seasoned and eaten at this
time. If they do not want to eat immediately, they can be operated in
the following ways to keep yoghurt fresh.
1. After acidification, the machine stops working, and automatically
enters the refrigeration mode to keep the yogurt fresh after 2
minutes. The refrigeration temperature of yogurt is 2 ℃- 8 ℃. After
refrigeration, the flavor of yogurt is pure and the taste is excellent (as
long as the machine is not shut down, the machine is always in the
refrigeration mode).
2. The fermented yoghurt can be directly put into the refrigerator
together with the container for cold storage purification. The flavor
and taste are slightly worse.
Note: yogurt should not be refrigerated for more than 10 days, and it
is best to eat within 3 days, because the activity of lactic acid
bacteria in yogurt is the highest during this period.

-18 -
Flavour:
Before eating yogurt, you can add fruit juice, fructose and honey
according to your own taste.
Tips:
1. If a large amount of gas and odor are produced after fermentation,
it means that the water source or milk powder is polluted and should
be discarded. If the sour taste appears white yellow luster "jellied
beancurd" shape, it means that the fermentation is good.
2. Too long fermentation time will produce a large number of
derivative liquid (light yellow liquid) with sour taste, which is a normal
phenomenon. You can drink the derivative liquid separately (the
derivative liquid contains rich lactic acid, vitamin B and other
nutrients) or stir it for consumption.
3. Full fat milk powder or fresh milk is suitable for developing
children, and low-fat or skim milk powder or fresh milk should be
used for overweight children or obese people to maintain their figure
(milk added with fructose can accelerate fermentation, avoid using
flavored milk).
4. In case of diarrhea or stomach discomfort, it is recommended to
increase the dosage from 100ml to 200-300ml each time.

-19 -
ELECTRICAL DIAGRAM
Plug
N
E
L
Fuse
Fan
control
circuit
Microcomputer controller
Compressor control circuit
Motor control circuit
L
M
power supply circuits
Buzzer circuit
Reset circuit
Oscillating circuit
M
YELLOW/GREEN
Compressor
Protector
DC 12V Fan
DC 12V motor
Heating element
Temperature sensor
LED
control board
MAINTENANCE
Caution: The plug must be removed before cleaning to avoid electric
shock.
1) Take out the mixing blade, wipe it with a dampened cloth.
2) Take out the removable bowl, clean it with a dampened soft cloth.
3) Wipe the transparent lid and refill lid with a dampened cloth.
4) Remove the dirty on the body or other places with a dampened
cloth, and do not pour water on cord, plug and ventilation,
immerse the appliance in water or any other liquid.
5) Allow drying thoroughly with a dry cloth, then return the
component to the home position.
220-240V/50Hz
Power

-20 -
COMMON PROBLEM
No.
Exist problem
Reason analysis
Resolutions
1
Not easy to take out
loading bowl after the ice
cream is finished
There are water drops
between the refrigeration
barrel and the loading
bow
l that are not wiped
clean
, resulting in
freezing
Wait 3-8 minutes
before taking out
the ice cream
bucket.
2
The transparent lid is
lifted to the mixing fan
blade, and it cannot be
stuck in place
The mixing fan blades
not
in place, and pay
attention to the
alignment of the convex
hull at the bottom
Put the mixing
fan in place and
rotate the
transparent
cover in place
3
The loading bowl
cannot be placed in the
cold bucket
Deformation caused by
improper use of loading
bowl
Buy a new
loading bowl
4
At the beginning of
making ice
cream, the
mixing fan seriously
scratched or jammed.
Deformation caused by
improper use of loading
bowl
Buy a new
loading bowl
AFTER SALES SERVICE
One year warranty service is available from the date of purchase.
The date of purchase of the invoice or after-sales service warranty
card is subject to the warranty service. The problems you encounter
when using our company's home automatic ice cream machine can
be helped and resolved through the service hotline. We provide
technical advice free of charge.
●One of the following conditions is not covered by the warranty:
1) Components are damaged due to improper use, maintenance and
storage;
2) Damage caused by non-Donlim WEILI maintenance personnel or