Sage BCI600UK the Smart Scoop User manual

Registered in England & Wales No. 8223512. Due to continued product improvement, the products illustrated or
photographed in this document may vary slightly from the actual product.
Copyright BRG Appliances 2013.
BCI600UK Issue - D13
Phone: [phone]
www.sageappliances.co.uk
[e-mail]
Register your product and
get more from your purchase
Product registration takes only a few
minutes and ensures both a record
of your purchase and your warranty.
Registration also makes it easier to get
support and advice on any questions or
issues that you might have in the future.
If you wish, we can also send you free
recipes and additional hints and tips on
making the best of your appliance.
Go to www.sageappliances.co.uk
and click on ‘Product Registration’.
What’s on your mind?
Our constant aim is to improve the
quality and features of our appliances.
We welcome your comments and ideas
in assisting our ongoing development.
Go to www.sageappliances.co.uk
and click on ‘Support’.
Sage™by Heston Blumenthal‰
Customer Service Centre

BCI600UK
the Smart Scoop™
Instruction Booklet

2
PAge heAder.....
CONTENTS
3We recommend safety first
8Getting to know your
new appliance
10 Operating your new appliance
16 Tips for Better Ice Cream Making
18 Care & Cleaning
20 Troubleshooting
22 Starter Recipes
WARNING
To prevent damage to the compressor
and to ensure maximum performance,
place unit in the up right position for
12 hours after transit.
NOTE
Always store the ice cream
machine upright and level on
its supporting feet. This will
ensure reliable compressor
performance.

3
Page header.....
WE RECOMMEND SAFETY FIRST
WHEN USING ELECTRICAL
APPLIANCES, BASIC
SAFETY PRECAUTIONS
SHOULD ALWAYS BE
FOLLOWED, INCLUDING
THE FOLLOWING:
• Before using for the first
time please ensure that
your electricity supply is the
same as shown on the rating
label on the underside of the
appliance. If you have any
concerns please contact your
local electricity company.
• Your Sage™ by Heston
Blumenthal‰appliance
includes a BS 13 amp
moulded mains plug on the
supply cord.
• Should you need to change
this plug, please complete
the rewiring as follows
(after safe disposal of the
moulded plug).
• Please note that a cut off plug
inserted into a socket is a
serious danger risk.
• Wires are coloured as follows:
−Blue = Neutral
−Brown = Live
−Green & Yellow = Earth
• As the colours of the wire
may not correspond with the
coloured markings which
identify the terminals in
your plug, please refer to the
following:
−The Blue wire must be
connected to the terminal
which is marked ‘N’.
−The Brown wire must be
connected to the terminal
which is marked with the
letter ‘L’.
−The Green & Yellow wire
must be connected to the
terminal which is marked
with the letter E or the
earth symbol .
• Please note that if a 13 amp
plug is used, a 13 amp fuse
should be used.
IMPORTANT SAFEGUARDS
At Sage™ by Heston Blumenthal‰we are very safety conscious.
We design and manufacture consumer products with the safety
of you, our valued customer, foremost in mind. In addition we
ask that you exercise a degree of care when using any electrical
appliance and adhere to the following precautions.

4
PAge heAder.....
WE RECOMMEND SAFETY FIRST
• Carefully read all instructions
before operation and save for
future reference.
• Remove and safely discard
any packaging material and
promotional labels before
using the Sage™ by Heston
Blumenthal‰product for the
first time.
• To eliminate a choking
hazard for young children,
remove and safely discard the
protective cover fitted to the
power plug of this appliance.
• Do not place the ice cream
machine near the edge of the
counter top or table during
operation. Ensure the surface
is level, clean and free of
liquid or other substances.
Vibration during the
churning process may cause
the machine to move slightly.
• Do not place this appliance
on or near a hot gas or
electric burner, or where it
could touch a heated oven.
Position the appliance at a
minimum distance of
15cm away from walls. To
ensure proper ventilation.
• Always operate the ice cream
machine on a stable surface.
• Do not operate the ice
cream machine on a sink
drain board.
• Always ensure the ice
cream machine is properly
assembled before connecting
to a power outlet and
operating. Follow the
instructions provided in
this book.
• The ice cream machine is not
intended to be operated by
means of an external
timer or separate remote
control system.
• Do not cover the air vents
when the ice cream machine
is in use.
• Do not place any ingredients
directly into the ice cream
chamber. Place ingredients
into the ice cream bowl only.
• Do not store explosive
substances such as aerosol
cans with a flammable
propellant in this appliance.
• Ensure ice cream chamber is
clean, dry, and free of debris
before each use.

5
WE RECOMMEND SAFETY FIRST
• Do not place fingers or hands
inside the ice cream machine
during operation. Avoid
contact with moving parts.
• Ensure the ice cream
machine is switched off and
then unplugged from the
power outlet when not in use
and before cleaning.
• Do not leave the lid off the ice
cream machine for extended
periods of time.
• Keep the inside and outside
of the appliance clean. Follow
the cleaning instructions
provided in this book.
• Do not use any other
accessories other than those
provided with the Sage™ by
Heston Blumenthal‰product.
IMPORTANT SAFEGUARDS FOR
ALL ELECTRICAL APPLIANCES
• Unwind the power cord fully
before use.
• To protect against electrical
shock, do not immerse power
cord, power plug or appliance
in water or any other liquid.
• Do not let the power cord
hang over the edge of the
counter top or table,
touch hot surfaces or
become knotted.
• It is recommended to
regularly inspect the
appliance. Do not use the
appliance if the power cord,
power plug or appliance
becomes damaged in
anyway. Return the entire
appliance to the nearest
authorised Sage™ by Heston
Blumenthal‰Service Centre
for examination and/or repair.
• Any maintenance, other
than cleaning, should
be performed at an
authorised Sage™ by Heston
Blumenthal‰Service Centre.

6
• This appliance is for
household use only. Do
not use this appliance for
anything other than its
intended use. Do not use in
moving vehicles or boats. Do
not use outdoors. Misuse may
cause injuries.
• The insulation of a residual
current device (safety switch)
is recommended to provide
additional safety protection
when using electrical
appliances. It is advisable that
a safety switch with a rated
residual operating current not
exceeding 30mA be installed
in the electrical circuit
supplying the appliance. See
your electrician for advice.
• This appliance can be used
by children aged from 8 years
and above and persons with
reduced physical, sensory or
mental capabilities or lack of
experience and knowledge
if they have been given
supervision or instruction
concerning use of the
appliance in a safe way
and understand the hazards
involved. Children shall
not play with the appliance.
Cleaning and user
maintenance shall not
be made by children
without supervision.
The symbol shown
indicates that this
appliance should not be
disposed of in normal
household waste. It
should be taken to a
local authority waste
collection centre
designated for this
purpose or to a dealer
providing this service.
For more information,
please contact your local
council office.
WE RECOMMEND SAFETY FIRST
FOR HOUSEHOLD USE ONLY
SAVE THESE INSTRUCTIONS

7
FEATURES OF YOUR NEW APPLIANCE
Automatic Mode
Automatic mode churns and freezes
the ingredients to the selected/desired
consistency. Select one of the four pre set
functions: Sorbet, frozen yogurt, gelato or
ice cream. Smart Scoop will beep
when ready.
Manual Mode
The time to make ice cream can be manually
set for pre timed recipes.
Preset Functions
The Sage™ by Heston Blumenthal‰Smart
Scoop™ has four pre set functions to pick
from. Select one of the following settings;
sorbet, frozen yogurt, gelato, or ice cream.
Pre Cool
It’s good practice to pre cool the machine
when preparing your dessert base. This
optional function will cool the machine to
approximately -10 to - 30°C and usually take
about 5–10 minutes.
Keep Cool
Once the consistency of the dessert has
been achieved, Keep Cool will prevent the
mixture from melting. When the machine is
in this mode, note that the compressor will
operate intermittently to ensure consistency
of the dessert.
Child Lock
The Sage™ by Heston Blumenthal‰Smart
Scoop™ features a child lock. Press and hold
HOLD for 2 seconds to set the child lock
mode. To exit this mode press and hold for 2
seconds again.
Add Mix-Ins
Mix-ins such as chocolate chips, fresh fruit
and flavours can all be added easily through
the flip back lid. The ice cream machine will
beep and ADD MIX-INS will flash to let you
know that it is time to add your
favourite condiments!
Sound
The ice cream machine features an alert
beeper when your ice cream is ready. This
alert can be set between: loud, soft or mute.

8
GETTING TO KNOW YOUR NEW APPLIANCE
A. Anodised ice cream bowl with handle
for easy removal. Not dishwasher safe
and should not be stored in the freezer.
B. Paddle used to scrape the sides of the
bowl and churn the ice cream.
Note: not to be stored in the freezer*.
C. Lid can be lifted or folded back into
2 parts.
D. Stainless steel housing
E. POWER button will turn the ice cream
machine on or off.
F. START | PAUSE will start and stop the
dessert making process.
G. Manual timer use to select time, from
5 minutes to 180 minutes.
H. PRE-COOL function will PRE-COOL the
machine down to -10°C to -30°C.
I. Keep cool will keep dessert chilled and
churned for up to 3 hours.
J. Auto timer/Hardness selection dial will
scroll between the following settings:
sorbet, frozen yogurt, gelato, or ice
cream. Rotate the dial left for softer
textured desserts or right for harder
textured desserts.
K. TEMP/UNITS button allows you to
toggle between Celsius and Fahrenheit.
L. Sound select between loud, soft or mute.
M. Handles for easy lifting.
N. Bowl chamber
A B C G H I
EJ
C
F
K
L
D
N
M
* Dishwasher safe parts.

9
GETTING TO KNOW YOUR NEW APPLIANCE
SMART SCOOP DISPLAY
O. LCD Control Display provides
information on function setting and
cooling progress.
P. Hardness selection bar
Q. Progress indicator bar
R. Keep Cool will keep the frozen dessert
chilled and churned for up to 3 hours.
S. Add mix-ins will flash to let you know
when it is time to add your favorite
mix-ins.
T. Pre-Cooling
Less air is whipped into gelatos
to create the smooth and creamy
consistency when compared with the
light and fluffy texture of an ice cream.
Commercial machines employ large
cooling systems to set the gelato more
quickly which reduces the churning
required. Pre cool works by reducing
the temperature of the cooling chamber
to its optimal operating temperature
before the base mix is introduced.
As the appliance is already cold. It
will take less time to freeze. This
reduces the churning required
to achieve the dense & creamy
consistency of a great gelato.
U. Press Start flashes when in the PRE-
COOL mode to advise that the machine
is chilled and ready to start churning.
V. Remove blade indicates that the
dessert is finished and the blade can be
removed from the bowl.
W
Y
X
Z
ACCESSORIES
W. Anodised ice cream bowl
X. Spatula use to scrape the bowl
Y. Paddle
Z. Bottle brush for easy cleaning of the
paddle and bowl
TPQ
R
U
V
S O

10
PAge heAder.....
OPERATING YOUR NEW APPLIANCE
WARNING
The ice cream machine contains a
compressor that MUST remain upright
at all times. Never store machine on any
other surface apart from its feet.
BEFORE FIRST USE
Machine preparation
Remove and discard all labelling and
packaging materials attached to your ice
cream machine. Ensure you have removed
all parts and accessories before discarding
the packaging.
Remove the lid, ice cream bowl and paddle
from the machine. Clean these parts and
accessories using warm soapy water and
rinse thoroughly. Ensure all parts are
completely dry.
NOTE
Always place the paddle inside the
bowl before adding ingredients. This
ensures that the ingredients will not
spill into the ice cream chamber.
FIRST USE
Initial start up
• Place paddle inside the bowl.
• Place ingredients inside the bowl in
order of the recipe.
• Place ice cream bowl into the ice
cream chamber.
• There are 2 grooves in the bowl
chamber. When positioning the bowl,
align so that the bowl handle hinge is
positioned within these grooves.
• Make sure the BOWL CHAMBER and
the exterior of the ice cream bowl is
completely dry before inserting.
FIRST USE

11
Page header.....
OPERATING YOUR NEW APPLIANCE
NOTE
It is important that the paddle is
properly assembled onto the drive
shaft to ensure ingredients are mixed.
1. To lock the lid into position, align the
lid handle to the alignment graphic,
rotating clockwise into the LOCK
position.
2. Press the POWER button to turn the
machine on.
3. Rotate the hardness selection dial to
your chosen dessert.
Press the START | PAUSE button to
begin the churning process. The elapsed
time will be displayed on the LCD.
4. The smart scoop will beep
when your dessert has reached its
desired consistency.
PRE-COOL
NOTE
PRE-COOL can only be operated in
the stand by mode, before pressing
start cancel button
a) PRE-COOL lowers the temperature of
the ice cream machine to reduce the
time it takes to prepare your dessert. It
is optional and is ideal to use while you
are preparing your ice cream base before
churning.
b) To select PRE-COOL function, press
the PRE-COOL button. The light
surrounding the button will turn from
white to red to indicate that the machine
is in PRE-COOL mode.
This mode will ‘PRE-COOL’ the machine
to approximately -10°C to -30°C,
taking about 5-10 minutes. READY will
illuminate and PRESS START will flash
on the LCD screen when the ice cream
maker has reached optimal temperature.
The paddle will start turning after 15
minutes has passed, but will not start
making the frozen dessert unless the
START|PAUSE button is pressed.
In this function, the LCD screen will
display the temperature, PRE-COOLING
will illuminate and the progress
indicator will scroll, to let you know that
you are in this mode.
c) PRE-COOL will return to standby after
20 minutes or alternatively can be
switched off either by pressing
PRE-COOL button again or pressing
the START | PAUSE button which will
override the pre-cooling mode.
NOTE
START | PAUSE button will have to be
pressed to start the churning process
after pre - cooling.

12
PAge heAder.....
OPERATING YOUR NEW APPLIANCE
NOTE
Please note that PRE-COOL is not
available after the
START | PAUSE button is pressed.
The light surrounding the PRE-COOL
button will turn off.
AUTOMATIC MODE
Start up
Progress indicator highlighted
Hardness indicator highlighted
Unwind the power cord completely and
insert the power plug into a
230V outlet.
Press the POWER button to turn the
machine on. The POWER button will
illuminate white. The LCD screen will
display AUTO. The progress and hardness
bar will also be illuminated. The arrow
should be pointed at the AUTO on the LCD
screen to indicate the mode you are in. To
ensure the machine is in auto mode, turn
the hardness dial.
HARDNESS SELECTION
To select the hardness you desire turn the
hardness dial left or right. Left being softer
frozen desserts such as sorbet and right
being harder desserts such as ice cream.
KEEP COOL / AUTOMATIC MODE
The keep cool function will keep the frozen
dessert chilled and churned for up to 3
hours in total. A red light will illuminate
around the button and the LCD screen will
display KEEP COOL when this feature is
selected. This function works by churning
the mixture to the hardness selected and
once reached the compressor will pulse on
and off in conjunction with the paddle to
maintain this consistency.
The paddle will only operate if the unit
detects that your dessert has melted below
the selected consistency. Keep cool can be
toggled on and off at anytime.
NOTE
When the Smart Scoop is in the keep
cool mode the compressor and motor
will turn on incrementally to check
the consistency of the dessert.
AUTOMATIC MODE

13
Page header.....
OPERATING YOUR NEW APPLIANCE
ADDING THE INGREDIENTS AND
STARTING OPERATIONS
a) Ensure that the paddle, bowl and bowl
chamber are clean. Insert paddle into the
bowl before adding ingredients.
b) Add ingredients to the ice cream bowl as
specified in the recipes. Wipe any spilled
ingredients from the rim of the bowl.
c) Insert the bowl by lowering into
position, ensuring bowl handle hinges
sit inside grooves on the chamber. It
is important that the ice cream paddle
is properly assembled onto the drive
shaft to ensure that the paddle operates
correctly (see fig 1).
d) Place the lid onto the ice cream bowl.
It is not recommended to open the lid
during operation unless stated in the
recipe. If Mix-ins are required, open the
smaller lid to add ingredients.
e) To start making the dessert press
START | PAUSE. The progress indicator
will scroll to show that the unit is
working. The ice cream machine should
now start cooling and churning to the
desired setting. As the dessert starts to
freeze the indicators on the hardness
selection bar will move up the selection
bar to the chosen dessert. It may take
sometime before indicators illuminate.
The display will toggle between elapsed
time and the current temperature to
which the machine is chilling.
The progress indicator bar will scroll
until the first hardness bar cell is
reached.
The hardness bar will progress towards
the selected dessert setting. This
will finish flashing when the desired
consistency is reached.
f) When the desired setting has been
reached, the compressor and the motor
will stop and READY will illuminate on
the LCD display. The beeper / music will
sound to indicate dessert is ready.
AUTOMATIC MODE
Fig. 1

14
PAge heAder.....
OPERATING YOUR NEW APPLIANCE
MANUAL MODE
Start up
Unwind the power cord completely and
insert the power plug into a 230V outlet.
Press the POWER button to switch the
machine on. The POWER button will
illuminate white. The LCD screen will
default to the AUTO mode and selection
bar. The ice cream machine and LCD screen
will always revert to the last program or
setting that was used.
Ensure the machine is in manual mode by
pressing the manual timer arrow
buttons. The time will be displayed and the
arrow should point to MANUAL on the left
hand side of the screen.
To change the time that you wish to churn
and freeze, press either one of the manual
timer arrow buttons. On average, ice
cream will need about 50 minutes to churn
and freeze.
HARDNESS SELECTION
This is not available in the manual mode.
KEEP COOL IN MANUAL MODE
The keep cool function will keep the frozen
dessert chilled and churned for the selected
duration of the machine operation. A red
light will illuminate around the button and
the LCD screen will display KEEP COOL
when this feature is selected. The paddle
will only operate if the unit detects that your
dessert has melted below the
pre - determined consistency.
ADDING THE INGREDIENTS AND
STARTING OPERATIONS
a) Set the time that you desire by pressing
the MANUAL buttons up or down .
b) Insert bowl and paddle into the chamber.
Add ingredients.
c) Press START | PAUSE button for the
ice cream making process to start. The
light around this button will illuminate
red to indicate that the button has been
selected and the machine has started the
dessert making process.
d) When the desired time has been
reached, the compressor and motor will
stop and READY will illuminate on the
LCD display.
e) If the START | PAUSE button is pressed
during the cycle this will pause the time.
To resume the process press the button
again.
f) If you need to reset the timer press and
hold the START | PAUSE button for 2
seconds and this will reset the timer.
g) The timer can be adjusted at any time.
MANUAL MODE

15
Page header.....
OPERATING YOUR NEW APPLIANCE
SMART SCOOP DISPLAY
The LCD screen will toggle between the
count down timer and temperature.
VOLUME FUNCTION
The Sage™ by Heston Blumenthal‰Smart
Scoop™ features a beeper to indicate
that your frozen dessert is ready. Volume
function is High, Low or Mute.
TEMP / UNITS
The Sage™ by Heston Blumenthal‰
Smart Scoop™ features a temperature and
units function. Press once to display the
temperature and press again to change
the units between Celsius and Fahrenheit.
FACTORY DEFAULT RESET
To restore the factory specified default
settings, press and hold the KEEP COOL
button for 5 seconds. This can only be done
in the standby mode.

16
TIPS FOR BETTER ICE CREAM MAKING
TIPS FOR BETTER
ICE CREAM MAKING
• Note time taken to make frozen desserts
can vary depending on the ambient
room temperature, temperature of
the ingredients and pre cooling the
machine. Note the cooler the ingredients
the faster the ice cream process. As a
general guideline it takes around
50 minutes to make ice cream.
• When making crème anglaise and
recipes that require heating ingredients,
it’s always a good idea to make this
the day before. Alternatively, cool
ingredients for at least 4 hours prior to
making ice cream.
• Always add ingredients into the
bowl before inserting into the ice
cream maker.
• Ice cream recipes stated in this
instruction booklet use ingredients such
as cream, milk, eggs and sugar. These
ingredients can be substituted with
similar ingredients to suit different taste
or dietary requirements.
Note, taste and texture will vary if using
different ingredients.
• Most dessert bases will expand during
the churning and freezing process. All
mixtures in this instruction booklet will
make approximately 1 litre of frozen
dessert unless otherwise specified. If
using ice cream mixtures from other
recipes, do not exceed 700ml
of ingredient base to allow for
the expansion.
• Alcohol inhibits the freezing process. It’s
best to add alcohol towards the end of
the ice cream making process.
• The consistency of the frozen dessert
made is a spoonable mixture. Please
note that if you are serving in cones or
on plates that it’s best to place the ice
cream in the freezer for 2 hours prior
to serving.
• When storing your frozen dessert in the
freezer, ensure that the container is air
tight and well sealed. This will prevent
ice crystals forming. Putting a piece of
baking or grease proof paper directly
over the top of the frozen dessert will
also help with this.
NOTE
Do not place the ice cream bowl in the
freezer.
• Frozen desserts are best eaten within 1
week of churning but can be kept for up
to 2 weeks.
• If serving a dessert from the freezer
it’s best to let the dessert sit at room
temperature for 5-10 minutes prior
to serving.
TIPS FOR MAKING CRÈME
ANGLAISE (CUSTARD BASE)
• Traditionally creamy textured ice cream
is made from a crème anglaise, custard
base. Below are tips on achieving the
prefect crème anglaise time after time.
• Make sure all ingredients are fresh.
• Eggs are best at room temperature for
making a custard base. Recipes are
based on min mass 59g eggs.
• Ensure that you measure all your
ingredients first and have them ready
before you start to cook.
• Either use a wire whisk or electric hand
beater, beat eggs yolks and sugar until
they are pale and thick.
• Use a heavy bottom saucepan when
cooking crème anglaise.

17
TIPS FOR BETTER ICE CREAM MAKING
• When heating the cream/milk you don’t
want to boil it. A good guide to know
when to remove the cream/milk from the
heat is when little bubbles start to form
around the edge of the cream/ milk.
• While the cream/milk mixture is heating
start to beat the sugar and eggs. Waiting
to do this after the cream/milk mixture
has heated may cause the cream/milk to
overheat and separate.
• Ensure that the mixture is constantly
stirred with a wooden spoon until it
thickens. A flat bottom wooden spoon
works best. To test using the back of
the spoon, coat the spoon in the crème
anglaise. Run your finger through the
mixture on the back of the spoon.
If the finger mark stays then the
mixture is thick enough.
Remove mixture immediately.
• If the mixture separates or curdles then
heat is too high. If the mixture separates
you will need to start again.
• Do not leave crème anglaise unattended
while cooking.
• Crème anglaise will take 5-15 minutes to
thicken depending on quantities etc.
• Always allow the mixture to cool at
room temperature stirring occasionally
to release heat until there is no visible
steam coming from the mix. Once
cooled then refrigerate until well chilled.
• Place a piece of plastic wrap directly on
top of the creme anglaise to prevent a
skin forming on top.
• To cool the mixture quickly it can be put
in a metal bowl and then into an ice bath
and stirred constantly until well chilled.

18
CARE & CLEANING
Ensure that the ice cream machine is turned
off by pressing the POWER button. The
ice cream machine is off when the START
| PAUSE button ’s LED light is no longer
illuminating red. Remove the power plug
from the power outlet. Allow the ice cream
machine compressor to cool completely
before disassembling and cleaning.
CLEANING THE STAINLESS
STEEL HOUSING
1. Wipe the exterior of the stainless
steel housing and the LCD screen
with a soft damp cloth. Do not use
a dry paper towel or cloth to clean
the LCD screen, or use an abrasive
cleanser or metal scouring pad
to clean any part of the ice cream
machine as these will scratch
the surface.
NOTE
Never immerse the stainless steel
housing in water or place in the
dishwasher. Take care not to allow
water or cleaning fluids to seep under
the buttons or LCD screen on the
control panel.
NOTE
To clean the ice cream chamber
ensure that the unit is at room
temperature. Wipe out with soapy
water and a soft damp cloth.
2. If over-spill of cream, milk, chocolate
etc. occurs in the interior chamber,
carefully remove using a soft,
damp cloth.
3. Let all surfaces dry thoroughly prior
to inserting the power plug into a
power outlet.
CLEANING THE LID
The lid can be cleaned in warm soapy water,
using a soft sponge. Do not use an abrasive
cleanser or metal scouring pad as these
will scratch the surface. Let all surfaces dry
thoroughly prior to placing into the ice
cream machine.
CLEANING THE ICE CREAM BOWL
Fill the ice cream bowl up halfway with
warm soapy water. A non-abrasive liquid
cleanser or mild spray solution may be used.
Allow to stand for 10-20 minutes.
NOTE
Ice Cream Bowl is NOT dishwasher
safe.

19
CARE & CLEANING
CLEANING THE PADDLE
1. Wash the paddle with warm soapy water.
Using the bottle brush supplied insert
this in the central part of the paddle to
clean all the ice cream out.
2. Let all surfaces dry thoroughly
before reassembling the ice cream
machine
NOTE
Paddle and lid are dishwasher safe on
the top rack ONLY.
STORAGE
1. Ensure the ice cream machine is turned
OFF. Remove power plug from the
power outlet.
2. Ensure the ice cream machine and
all accessories are completely clean
and dry.
3. Place the ice cream bowl and paddle
into the chamber.
4. Ensure the lid is on.
5. Store the appliance in an upright
position and level on it support legs.
Do not store anything on top of the
ice cream machine.