KVM-TEC KT-6936 Original operating instructions

Check out our Installation
Channel:
Delivery Content
LOCAL/CPU Unit
1 x Media4Kconnect un-
compressed local (CPU)
1 x 12VDC 2A power supply
1 x DP-DP cable 1.8m/5.9ft
1 x USB A-cable 1.8m/5.9ft
2 x SFP+Multimode up to
300m/984ft
alt. 2 x SFP Single Mode up
to 10km/6.2mi
4 x rubber feet
REMOTE/CON Unit
1 x Media4Kconnect un-
compressed remote (CON)
1 x 12VDC 2A power supply
2 x SFP+Multimode up to
300m/984ft
alt. 2 x SFP Single Mode up
to 10km/6.2mi
4 x rubber feet
KT - 6936 SET media4Kconnect Special uncompressed
KT - 6936L CPU/Local media4Kconnect Special uncompressed
KT - 6936R CON/Remote media4Kconnect Special uncompressed
First
Aid
kvm-tec
Video error
(stripes in the
picture)
USB is not
working
No Power
(No LED)
Check the
powerplug
Is the power
supply ok? Try
another Unit.
Try reprogramming
the Unit by using a
JTAG programmer
Contact kvm-tec
support
Are the USB
Devices plugged
in correctly?
Is the USB cable
on the Local side
plugged into the
PC?
Are the USB
Devices working
directly on the
PC?
Check if local
and remote Unit
have the same
 rmware
Replace the USB
cable from PC to
the Local
Extender
Check if the local
or the remote
Unit is causing
the problem by
swaping  rst the
local and than the
remote Unit to
another Unit
Contact kvm-tec
support
Check if all
cables are plug-
ged in correctly
Check if the PC is
sending a Image by
plugging in a
monitor on the
local out of the
local Unit
Check if the DDC is
set correctly (in menu
under point „O“)
Check if both
Units have the
correct  rmware
Contact kvm-tec
support
Check if all
cables are plug-
ged in correctly
Check if the PC is
sending a Image
by plugging in a
monitor on the
local out of the
local Unit
Check if local and re-
mote Unit have the
correct  rmware
Check if the DDC
is set correctly (in
the menu under
point „o“)
Check if the
network switch
is setup correctly
and has enough
bandwidth
Contact kvm-tec
support
Check if other units
have the same
behaviour
kvm-tec Supportkvm-tec Support [email protected][email protected] Phone: [phone] - 30Phone: [phone] - 30
We are here for you to answer
your questions about installation?
Manual download www.kvm-tec.com
or
kvm-tec Installationchannel on our homepage
personally [phone]
No video
4K DP 1.2 uncompressed
media4Kconnect Special
with RS232 & sound
media4Kconnect
Quick
Installation
kvm-tec

DP out to Monitor
USB from keyboard and mouse
power supply
for 12V 2A
1. Connect the CON/Remote and the CPU/Local Unit with the supplied 12V 2A power supply.
2. Now connect the USB cable to a USB socket of your PC and connect the other end of the USB cable to the
Local Unit. Connect the keyboard and mouse to the Remote Unit.
3. Connect the Local and the Remote Unit with a network  ber cable.
4. Connect the DP cable to the DP socket of the PC to the DP socket DP/in of the Local device and connect
the screen on the remote side with the DP cable.
5. Connect the Audio cable from PC to Local Extender and connect the Audio cable from Remote Extender
to Speaker
6. Connect the Audio Cable from Microphone to Remote Extender and connect the Audio cable from Local
Extender to PC.
HAVE FUN - Your kvm-tec Extender is now in use for many years (MTBF approx. 10 years)!
Duplex multimode OM4-fi ber cable (LC) up to 300m/984 ft main link 1
Duplex multimode OM4-fi ber cable (LC) up to 300m/984 ft main link 2
Audio out to Speaker
power supply
for 12V 2A
DP in from PC
USB to PC
Audio in from PC
Audio out to PC
Audio in from Microphne
RS232
plug RS232
plug
MEDIA4KCONNECT IN THE SIMULTANEOUS DOWNSCALING
Full
HD
4K
Full
HD
media4Kconnect remote
Flexline remote
Laptop mit gateway2GO
media4Kconnect
local
9 G stream
1 G stream
10 G stream
4K sources can be displayed simultaneously in 4K and with downscaling in Full HD on the
remote unit. The output of the stream is done at 4K over 10G bandwidth. Two streams
are transmitted simultaneously, so the 4K stream has 9 GBIT and the second stream in
Full HD 1 Gbit.
The streams can be routed and shared independently and one source can be split to
any number of screens. One user has full USB control (keyboard and mouse etc).

USING ON SCREEN MENU
Use the monitor and keyboard to access the main menu.
Access to the main menu
1. Make sure that the extenders, monitors and computer are turned on
2. Press the Alt gr ve times one after the other. The main menu and the
overview of the submenus are displayed.
3. To access a submenu, press the corresponding key or navigate with the arrow keys up
and down to the corresponding line and then press Enter key.
SCREEN „OSD Menü“
SCREEN „OSD menu“
In the main menu you can make the following settings by selecting the corresponding letters:
Press
S System status menu system status/ current status
F Features Menu activated features
L Switching List Switching List
P Sharing List Sharing List
E Login Login
U Update updatermware
G Settings settings
SYSTEM STATUS
By pressing the „S“ key or by selecting the arrow keys, you access the status menu, where you
will nd information about hardware and software versions, as well as the activated upgrades
The menu displays information about the connection, the resolution of the video channel
and the USB status. The current Firmware version is displayed in the upper left corner.
The link status indicates whether a connection is possible.
Video and USB display data transfer status
SCREEN „System Status“
1. The current version of the rmware can be downloaded from http://
www.kvm-tec.com/de/support. Each update le contains a detailed
description of the update process. For further information please
refer to the update chapter
2. Connect the USB stick to the CON (REMOTE) Unit (wait a few seconds
until the USB stick is connected to the CON Unit).
3. Then open the update menu with the „U“ key.
4. Press the „ U“ key to start the update on the remote (CON) unit.
5. Call the le with „S
6. The rmware is shown on the display under „Conguration found“,
7. Press the „U“ key to start the update on the remote (CON) unit
SETTINGS
By pressing the „G“ key or selecting the arrow keys you will have access to the Settings menu,
where you can access all Extender settings.
Screen „Settings „

FEATURES
MENU FEATURES
Pressing the „F“ key or selecting the arrow keys, you will access the FEATURES menu,
where you can select all the functions and the features.
P Point to point Mode on/off
S Matrix Switching Mode
E USB Emulation Mode
U USB Save Feature
V Uncompresed mode
M Unlock Features - redundant oder uncompressed im
Switching System
SCREEN „Menu Features“
POINT TO POINT
Pressing „P“ takes you to the point to point conguration. By default the Remote is directly
connected to the Local.
MATRIX SWITCHING SYSTEM
Pressing „S“ takes you to the Matrix Switching System conguration.
If this function is active, the Multiview Commander and Mouse Glide
functions are controlled via the Switching Manager software (see
Switching Manager manual).
All functions of the switching system can be operated via the Switching
Manager software.
With this link you can download the Switching Manager Software
Manual
downloaden: www.kvm-tec.com/en/support/manual
UNCOMPRESSED MODE
By pressing „V“ you can enable and disable the Uncompressed Mode.
Once this function is enabled, the KVM Extender will transmit up to 4K
resolution uncompressed and in 10bit color depth.
Please note that for this mode you need two 10G ber lines between the
remote and the local unit!
UNLOCK FEATURES REDUNDANT
UNCOMPRESSED FOR SWITCHING SYSTEMS
In this menu you can also unlock the „Uncompressed“ and „Redundancy“
feature after purchasing your 4k KVM Extender.
Order the unlock code for the desired feature from your supplier by
providing the device ID and serial number of the 4k KVM Extender.
By typing in the unlock code you unlock the desired feature. After
unlocking, activate the desired feature in the feature menu.
ADRESS & PHONE/EMAILS
If you have any questions about our products, please contact kvm-tec or
your dealer.
kvm-tec electronic gmbh
Gewerbepark Mitterfeld 1A
2523 Tattendorf
Austria
Phone: [phone]
Email: [email protected]
Email: [email protected]
Web: www.kvm-tec.com
You can nd our latest updates and FAQs on our homepage:
https://www.kvm-tec.com/support/overview-support/
KVM-TEC
Gewerbepark
Mitterfeld 1 A
2523 Tattendorf
Austria
www.kvm-tec.com
IHSE USA LLC
1 Corp.Dr.Suite
Cranburry NJ 08512
USA
www.ihseusa.com
IHSE GMBH Asia
158Kallang
Way,#07-13A
349245 Singapore
www.ihse.com
IHSE China Co.,Ltd
Room 814
Building 3, Kezhu Road
Guangzhou PRC
www.ihse.com.cn
IHSE GmbH
Benzstr.1
88094 Oberteuringen
Germany
www.ihse.com