KYLAND Technology SICOM3171 Series Operating and maintenance instructions

SICOM3171 Series Managed
Traffic Ethernet Serial Server
Quick Installation Manual
KYLAND Technology Co., Ltd.
First Edition-Sep. 2010
www.kyland.cn
Industrializing the Ethernet
Simplifying Industrial Communication
P/N: 1.12.02.0036-0

-2-
1. Packing list
The package list includes the following items:
SICOM3171 Managed Traffic Ethernet Serial
Server
1
10pin-RJ45 to DB9 Serial port cable 1
Customer Service Guideline 1
Screw-driver 1
Protective caps for RJ45 ports 5
Quick Installation Manual 1
CD for User’s Manual 1
NOTE: After unpacking, please check the accessories and
the appearance of the equipment, if anything is
missing or damaged, please contact us.
2. Product Overview
SICOM3171 is an ultra low power consumption (less than
3.5Watts), Managed Traffic Ethernet Serial Server. This
single slot serial server is designed to slide into an open
Detector Chassis Slot of any signal cabinet. This Traffic
Serial Server is widely deployed in SCADA and OSS
networks around world. This proven ultra low power
consumption serial server (Green Product-RoHS) features
one 10/100Base-TX Ethernet port, and four serial ports being
selectable for RS232, RS422 and RS485 serial connectivity.
The SICOM3171 Managed Traffic Ethernet Serial Server is
the second of a series of EZ Traffic Networks products from
Kyland and a continuation of our “Green Ethernet” product
line.
The SICOM3171 Traffic Ethernet Serial Server has COM,
TTY or GUI port control and management function, offers

-3-
monitoring and diagnostic utility. It enables data security via
SSHv2 and SSL/TLS, and variety of IP addressing methods
DHCP, RARP, ARP-PING for remote installation. It’s the ideal
for network enabling and remotely managing variable
message signs, loop detectors, ramp meters or any
RS232/422/485 serial device. This serial sever can be easily
installed into any traffic cabinet with an open dual slot in a
detector input chassis. Clean, filtered 12VDC or 24VDC
power is provided directly from the back-plane of the detector
chassis and eliminates adding to the mess of additional
power supplies and power cables within the traffic cabinet.
3. Product Features
Interface
Serial port: 4×RS232/422/485 10-pin RJ45 Serial ports,
50bps-1000Kbps throughput, default baud rate is 9600bps.
Ethernet port: 1×10/100Base-T(X) self-adaptive 8-pin RJ45
port, MDI/MDI-X.
Standards
IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IP, UDP, TCP, ARP,
DHCP, FTP, ICMP, LLDP, SNTP, SNMP, SSH, SSL/TLS,
HTTP,
HTTPS, TELNET
Cable
Ethernet Twisted pair: 0-100m
RS232 Twisted pair: 15m
RS422/RS485 Twisted pair: 1200m
Power requirements
Power input: 24VDC (9~36VDC)
Power consumption: <3.5W
Physical characteristics

-4-
Case: Aluminum case, fanless
Protection class: IP40
Installation: Inserted into a rack through rail slots
Dimensions: (W×H×D): 30 mm×114mm×167.5mm
The depth of the handle is 27.5mm.
Weight: 0.35kg
Environmental Limits
Operating Temperature: -40 to 85°C (-40 to 185°F)
Storage Temperature: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 0 to 95% (non-condensing)
WARRANTY
5 years
4. Panel Layout
Figure 1 Front panel view
1. RUN (system operation status LED)
2. PWR (power status LED)
3. Reset button
4. 10/100Base-T(X) RJ45 port SPEED LED
5. ETH,1×10/100Base-T(X) RJ45 ports

-5-
6. 10/100Base-T(X) RJ45 port LINK/ACT LED
7. D1-D4,4×10-pin RJ45 Serial ports
Figure 2 Rear panel view
8. Handle
9. Golden finger for power connection
5. Ports
10/100Base-T(X) 8-pin RJ45 port
SICOM3171 supports one 10/100Base-T(X) RJ45 port.
Table 1 10/100Base-T(X) RJ45 port pin definition
RJ45 8-Pin
Jack
MDI/NIC port
Signal Name
MDI-X/Switch port
Signal Name
1 Tx+ Rx+
2 Tx- Rx-
3 Rx+ Tx+
6 Rx- Tx-
RS232/422/485 10-pin RJ45 serial port
SICOM3171 supports four RS232/422/485 serial ports. Serial
port is a Shielded 10-pin RJ45 modular jack .

-6-
The standard of serial ports is 3-wire RS232, 4-wire RS422,
2-wire RS485, supplying 10-pin RJ45 plug —DB9F plug
console cable ,which connect the serial port with the 9-pin
serial port at the computer.
Table 2 RJ45 Connector RS232 pin definition
RJ45 10-Pin Jack Signal Name Signal Description
1 N/A N/A
2 N/A N/A
3 N/A N/A
4 N/A N/A
5 TxD Transmitted Data
6 RxD Received Data
7 SG Signal Ground
8 N/A N/A
9 N/A N/A
10 N/A N/A
Table 3 RJ45 Connector RS422/485 pin definition
Signal NameRJ45 10-Pin
Jack 485 422
Signal
Description
1 N/A TxD- Transmitted
Data (-)
2 TxD
/RxD- RxD- Received Data (-)
3 N/A N/A N/A
4 N/A N/A N/A
5 N/A TxD+ Transmitted
Data (+)
6 TxD
/RxD+ RxD+ Received Data (+)
7 SG SG Signal Ground

-7-
8 N/A N/A N/A
9 N/A N/A N/A
10 N/A N/A N/A
Golden finger for power connection
SICOM3171 has golden finger to connect with plug.12VDC or
24VDC power supply is offered by the cabinet backplane
Table 4 Golden finger Description
Golden finger
22-Pin plug Signal Name Signal Description
A - INPUT -
B + 24VDC INPUT +
L GND Chassis Ground
Figure 3 Golden finger for power connection
6. LED indicators
The LED indicators in the front panel of SICOM3171 can
indicate system operation status and port status in order to
find and settle faults. Table 5 shows the meanings of LEDs in
the front panel.
Table 5 LED indicators
LED State Description
system status LEDs
RUN Blinking Switch operates normally

-8-
(Green) OFF Switch does not operate or
operate abnormally.
ON Power is connected and operates
normally.PWR
(Green) OFF Power is not connected or
operates abnormally.
Ethernet RJ45 port status LEDs
Each RJ45 Ethernet port has two indicators, a yellow lamp
and a green lamp. The yellow lamp indicates port rate, and
the green lamp indicates port connection state.
On 100M working state
(i.e. 100Base-TX)SPEED
(Yellow) Off 10M working state
(i.e. 10Base-T)
On Effective network connection in
the port
Blinking Network activities in the port
LINK/ACT
(Green)
Off No effective network connection
in the port
7. Installation
Figure 4 Dimension drawing

-9-
Figure 5 Mounting on the rack
Note: 1: Rack for mounting; 2: Power socket; 3: Back panel;
4: SICOM3171
8. Self inspection
After the equipment is powered on, PWR LED will stay on.
The device will begin the initialization process; the RUN LED
will blink after the device completes the initialization process
after 20 seconds.
9. Log in Telnet management
1) Using cross-over cable or straight-through cable to
connect an Ethernet port in the server with the network card
of PC through Ethernet.
2) Type “telnet 192.168.0.3” in “Operation” window in
Windows system or MS-DOS command prompt, click
“ apply”.
3) Enter the default username “root” and the default
password “123”, press “Enter” key.
4) Please check the detail in “Software Operation Manual”.

-10-
10. Log in WEB management
1) Using cross-over cable or straight-through cable to
connect an Ethernet port in the Server with the network card
of PC through Ethernet. Type the IP address of switch in IE
browser, such as IP is 192.168.0.3, press “Enter” key, you
can see the page as Figure6. Enter the default username
“root” and the default password “123”, click “Sign in” to enter
the WEB’s main page.
Figure 6 Log in page
2) Telnet serial server and check WEB configuration, obtain
WEB user name and password. The operation command is
as follows:
#cat /etc/httpd.conf
Figure 7 checking by Telnet
11. User Manual
CD for User’s Manual is attached. (PDF Format)