Dell EMC PowerEdge FC430 User manual

Dell PowerEdge FC430
Owner's Manual
Regulatory Model: E01B Series
Regulatory Type: E01B002

Notes, cautions, and warnings
NOTE: A NOTE indicates important information that helps you make better use of your product.
CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem.
WARNING: A WARNING indicates a potential for property damage, personal injury, or death.
©2016 Dell Inc. All rights reserved. This product is protected by U.S. and international copyright and intellectual property laws. Dell and the Dell logo are
trademarks of Dell Inc. in the United States and/or other jurisdictions. All other marks and names mentioned herein may be trademarks of their respective
companies.
2016 - 09
Rev. A02

Contents
1 PowerEdge FC430 system overview.............................................................................................................. 7
Supported configurations for FC430 system.................................................................................................................7
Front panel.......................................................................................................................................................................... 7
Front panel view—single SSD system...................................................................................................................... 7
Front panel view—dual SSD system.........................................................................................................................8
Diagnostic indicators on the front panel......................................................................................................................... 9
Health status indicator................................................................................................................................................ 9
SSD activity indicator codes..................................................................................................................................... 10
iDRAC Direct LED indicator codes............................................................................................................................11
Locating Service Tag of your system............................................................................................................................ 12
2 Documentation resources.............................................................................................................................13
3 Technical specifications............................................................................................................................... 15
Chassis dimensions and weight...................................................................................................................................... 15
Processor specifications..................................................................................................................................................15
System battery specification.......................................................................................................................................... 15
Memory specifications.....................................................................................................................................................16
RAID controller..................................................................................................................................................................16
Drive specifications.......................................................................................................................................................... 16
SSD specification........................................................................................................................................................16
Ports and connectors specifications .............................................................................................................................16
USB ports.................................................................................................................................................................... 16
QSFP+ port.................................................................................................................................................................16
PCIe Mezzanine card.......................................................................................................................................................16
Video specification........................................................................................................................................................... 16
Environmental specifications...........................................................................................................................................17
Particulate and gaseous contamination specifications .........................................................................................18
Standard operating temperature .............................................................................................................................19
Expanded operating temperature restrictions .......................................................................................................19
4 Initial system setup and configuration..........................................................................................................20
Setting up your system...................................................................................................................................................20
iDRAC configuration........................................................................................................................................................20
Options to set up iDRAC IP address....................................................................................................................... 20
Options to install the operating system.........................................................................................................................21
Methods to download firmware and drivers...........................................................................................................21
5 Pre-operating system management applications......................................................................................... 23
Options to manage the pre-operating system applications....................................................................................... 23
System Setup...................................................................................................................................................................23
Viewing System Setup.............................................................................................................................................. 23
Contents 3

System Setup details.................................................................................................................................................24
System BIOS.............................................................................................................................................................. 24
iDRAC Settings utility................................................................................................................................................ 43
Device Settings.......................................................................................................................................................... 44
Dell Lifecycle Controller.................................................................................................................................................. 44
Embedded systems management............................................................................................................................44
Boot Manager.................................................................................................................................................................. 45
Viewing Boot Manager..............................................................................................................................................45
Boot Manager main menu........................................................................................................................................ 45
PXE boot...........................................................................................................................................................................46
6 Installing and removing sled components.....................................................................................................47
Safety instructions...........................................................................................................................................................47
Before working inside your system..........................................................................................................................47
After working inside your system............................................................................................................................ 48
Recommended tools........................................................................................................................................................48
Sled....................................................................................................................................................................................48
Removing a sled.........................................................................................................................................................48
Installing a sled........................................................................................................................................................... 49
Inside the sled...................................................................................................................................................................50
Cooling shroud.................................................................................................................................................................. 51
Removing the cooling shroud................................................................................................................................... 51
Installing the cooling shroud..................................................................................................................................... 53
System memory...............................................................................................................................................................54
General memory module installation guidelines..................................................................................................... 55
Mode-specific guidelines.......................................................................................................................................... 56
Sample memory configurations............................................................................................................................... 58
Removing memory modules.....................................................................................................................................59
Installing memory modules........................................................................................................................................ 61
PCIe mezzanine card.......................................................................................................................................................62
Removing the PCIe mezzanine card....................................................................................................................... 63
Installing the PCIe mezzanine card......................................................................................................................... 65
Internal Dual SD Module (IDSDM) card .......................................................................................................................66
Removing an internal SD card..................................................................................................................................67
Installing an internal SD card.................................................................................................................................... 68
Removing the IDSDM card.......................................................................................................................................69
Installing the IDSDM card.......................................................................................................................................... 71
SD vFlash card................................................................................................................................................................. 72
Replacing the SD vFlash card...................................................................................................................................72
Installing the SD vFlash card.................................................................................................................................... 73
LAN on Motherboard (LOM) riser card........................................................................................................................74
Removing the LOM riser card.................................................................................................................................. 74
Installing the LOM riser card.................................................................................................................................... 75
Processors........................................................................................................................................................................ 76
Removing a heat sink.................................................................................................................................................77
Removing a processor...............................................................................................................................................78
4Contents

Installing a processor................................................................................................................................................. 82
Installing a heat sink...................................................................................................................................................83
Processor blank and DIMM blank.................................................................................................................................. 84
Removing a processor blank and DIMM blank.......................................................................................................85
Installing a processor blank and DIMM blank......................................................................................................... 86
Solid State Drives (SSD).................................................................................................................................................86
SSD installation guidelines........................................................................................................................................ 86
Shutdown procedure for servicing an SSD............................................................................................................86
Removing an SSD from an SSD carrier ..................................................................................................................87
Installing an SSD into an SSD carrier.......................................................................................................................88
Removing an SSD carrier..........................................................................................................................................89
Installing an SSD carrier............................................................................................................................................ 90
Removing an SSD blank.............................................................................................................................................91
Installing an SSD blank.............................................................................................................................................. 92
Removing the SSD cage...........................................................................................................................................92
Installing the SSD cage............................................................................................................................................. 93
Configuring the boot drive....................................................................................................................................... 95
Solid State Drive (SSD) backplane................................................................................................................................95
Removing the SSD backplane..................................................................................................................................95
Installing the SSD backplane.................................................................................................................................... 96
System battery.................................................................................................................................................................98
Replacing the NVRAM backup battery...................................................................................................................98
System board................................................................................................................................................................... 99
Removing the system board.................................................................................................................................... 99
Installing the system board...................................................................................................................................... 101
Restoring the Service Tag by using the Easy Restore feature.......................................................................... 103
Entering the system Service Tag by using System Setup..................................................................................103
Trusted Platform Module.............................................................................................................................................. 104
Installing the Trusted Platform Module................................................................................................................. 104
Initializing the TPM for BitLocker users................................................................................................................ 105
Initializing the TPM for TXT users......................................................................................................................... 105
7 Using system diagnostics........................................................................................................................... 106
Dell Embedded System Diagnostics.............................................................................................................................106
When to use the Embedded System Diagnostics................................................................................................106
Running the Embedded System Diagnostics........................................................................................................106
System diagnostics controls................................................................................................................................... 107
8 Jumpers and connectors ........................................................................................................................... 108
System board jumper settings......................................................................................................................................108
System board connectors.............................................................................................................................................109
Disabling a forgotten password.....................................................................................................................................110
9 Troubleshooting your system...................................................................................................................... 111
Safety first — for you and your system....................................................................................................................... 111
Troubleshooting system memory...................................................................................................................................111
Contents 5

Troubleshooting Solid State Drives...............................................................................................................................112
Troubleshooting USB devices....................................................................................................................................... 112
Troubleshooting an internal SD card............................................................................................................................ 113
Troubleshooting processors...........................................................................................................................................113
Troubleshooting the system board............................................................................................................................... 114
Troubleshooting the NVRAM backup battery.............................................................................................................114
10 Getting help.............................................................................................................................................. 116
Contacting Dell................................................................................................................................................................116
Quick Resource Locator.................................................................................................................................................116
6 Contents

PowerEdge FC430 system overview
The Dell PowerEdge FC430 system is a quarter-width sled that supports up to:
• Two Intel Xeon E5-2600 v4 processors
• Eight DIMMs
• Two 1.8-inch uSATA solid state drives (SSDs).
Topics:
• Supported configurations for FC430 system
• Front panel
• Diagnostic indicators on the front panel
• Locating Service Tag of your system
Supported configurations for FC430 system
The Dell PowerEdge FC430 system supports the following configurations:
Figure 1. Supported configurations for the Dell PowerEdge FC430 system
Front panel
The front panel provides access to the features available on the front of the server, such as the power button, status indicator,
management indicator, and USB ports. The diagnostic LEDs or the LCD panel is prominently located on the front panel. The hot-
swappable hard drives are accessible from the front panel.
Front panel view—single SSD system
The following figure and the table describe the single SSD system features and its indicators.
1
PowerEdge FC430 system overview 7

Figure 2. Front panel view—single SSD system
1 USB port 2 USB management port or iDRAC Direct port
3 SSD 4 QSFP+ connector
5 Sled power-on indicator, power button
Table 1. Front panel features and indicators—single SSD system
Item Indicator, button, or
connector Icon Description
1 USB connector Enables you to connect USB devices to the sled. This port is USB 3.0
compliant.
2 USB management port or
iDRAC Direct port
Enables you to connect USB devices to the sled or provides access to
the iDRAC Direct features. For more information about iDRAC, see the
iDRAC Guide at Dell.com/idracmanuals. This port is USB 2.0
compliant.
3 SSD A single 1.8-inch hot-swappable uSATA SSD is supported in this chassis.
4 QSFP+ connector (2) The QSFP+ connectors can be used for Infiniband or for Ethernet.
5 Sled power-on indicator,
power button
The power-on indicator turns on when the sled is turned on. The power
button controls the power supply output to the system.
Front panel view—dual SSD system
The following figure and the table describes about the dual SSD system features and its indicators.
8PowerEdge FC430 system overview

Figure 3. Front panel view—dual SSD system
1 USB port 2 USB management port or iDRAC Direct port
3 SSD 4 Sled power-on indicator, power button
Table 2. Front panel features and indicators—dual SSD system
Item Indicator, button, or
connector Icon Description
1 USB port Enables you to connect USB devices to the sled. This port is USB 3.0
compliant.
2 USB management port or
iDRAC Direct port
Enables you to connect USB devices to the sled or provides access to
the iDRAC Direct features. For more information about iDRAC, see the
iDRAC Guide at Dell.com/idracmanuals. This port is USB 2.0
compliant.
3 SSD (2) Up to two 1.8-inch hot-swappable uSATA SSDs are supported in this
chassis.
4 Sled power-on indicator,
power button
The power-on indicator turns on when the sled is turned on. The power
button controls the power supply output to the system.
Diagnostic indicators on the front panel
Health status indicator
The Health status indicator indicates the health condition of the system.
PowerEdge FC430 system overview 9

Table 3. Health status indicator codes
Icon Health-status indicator pattern Condition
Solid blue No errors are present in the system. System is in good health.
Blinking blue Identify mode is enabled (regardless of system errors)—system is in
the process of identifying the sled.
Solid amber System is in failsafe mode—sled is not ready/available and the chassis
cannot be turned on.
Flashes amber Errors present in the system.
SSD activity indicator codes
The Solid State Drive (SSD) indicators display different patterns as drive events occur in the system.
NOTE: The sled must have an SSD or an SSD blank installed in each drive bay.
Figure 4. SSD indicators
1SSD activity indicator (green) 2 SSD status indicator (green and amber)
NOTE: If the drive is in the Advanced Host Controller Interface (AHCI) mode, the status LED (on the right side) does not
function and remains off.
Table 4. SSD indicator codes
Drive-Status indicator pattern Condition
Flashes green twice per second Identifying the drive or preparing for removal
Off Drive ready for insertion or removal
10 PowerEdge FC430 system overview

Drive-Status indicator pattern Condition
NOTE: The drive status indicator remains off until all drives are
initialized after system power is supplied. Drives are not ready for
insertion or removal during this time.
Flashes green, amber, and then turns off Predicted drive failure
Flashes amber four times per second Drive failed
Flashes green slowly Drive rebuilding
Steady green Drive online
Flashes green for three seconds, amber for three
seconds, and turns off after six seconds
Rebuild aborted
iDRAC Direct LED indicator codes
The iDRAC Direct LED indicator lights up to indicate that the port is connected and is being used as a part of the iDRAC subsystem.
NOTE: The iDRAC Direct LED indicator does not turn on when the USB port is used in the USB mode.
Figure 5. iDRAC Direct LED indicator
1iDRAC Direct status indicator
The iDRAC Direct LED indicator table describes iDRAC Direct activity when configuring iDRAC Direct by using the management port (USB
XML Import).
Table 5. iDRAC Direct LED indicators
Convention iDRAC Direct LED
indicator pattern Condition
A Green Turns green for a minimum of two seconds to indicate the start and end of a file transfer.
B Flashing green Indicates file transfer or any operation tasks.
C Green and turns off Indicates that the file transfer is complete.
D Not lit Indicates that the USB is ready to be removed or that a task is complete.
PowerEdge FC430 system overview 11

The following table describes iDRAC Direct activity when configuring iDRAC Direct by using your laptop and cable (Laptop Connect):
Table 6. iDRAC Direct LED indicator patterns
iDRAC Direct LED
indicator pattern Condition
Solid green for two seconds Indicates that the laptop is connected.
Flashing green (on for two
seconds and off for two
seconds)
Indicates that the laptop connected is recognized.
Turns off Indicates that the laptop is unplugged.
Locating Service Tag of your system
Your system is identified by a unique Express Service Code and Service Tag number. The Express Service Code and Service Tag are found
on the front of the system by pulling out the information tag. Alternatively, the information may be on a sticker on the chassis of the
system. This information is used by Dell to route support calls to the appropriate personnel.
12 PowerEdge FC430 system overview

Documentation resources
This section provides information about the documentation resources for your system.
Table 7. Additional documentation resources for your system
Task Document Location
Setting up your system For information about installing the system into a
rack, see the Rack documentation included with
your rack solution.
Dell.com/poweredgemanuals
For information about turning on the system and
the technical specifications of your system, see the
Getting Started With Your System document that
is shipped with your system.
Dell.com/poweredgemanuals
Configuring your system For information about iDRAC features, configuring
and logging in to iDRAC, and managing your
system remotely, see the Integrated Dell Remote
Access Controller User's Guide.
Dell.com/idracmanuals
For information about installing the operating
system, see the operating system documentation.
Dell.com/operatingsystemmanuals
For information about understanding Remote
Access Controller Admin (RACADM)
subcommands and supported RACADM interfaces,
see the RACADM Command Line Reference Guide
for iDRAC.
Dell.com/idracmanuals
For information about updating drivers and
firmware, see the Methods to download firmware
and drivers section in this document.
Dell.com/support/drivers
Managing your system For information about systems management
software offered by Dell, see the Dell OpenManage
Systems Management Overview Guide.
Dell.com/openmanagemanuals
For information about setting up, using, and
troubleshooting OpenManage, see the Dell
OpenManage Server Administrator User’s Guide.
Dell.com/openmanagemanuals
For information about installing, using, and
troubleshooting Dell OpenManage Essentials, see
the Dell OpenManage Essentials User’s Guide.
Dell.com/openmanagemanuals
For information about installing and using Dell
System E-Support Tool (DSET), see the Dell
System E-Support Tool (DSET) User's Guide.
Dell.com/DSET
For information about installing and using Active
System Manager (ASM), see the Active System
Manager User’s Guide.
Dell.com/asmdocs
2
Documentation resources 13

Task Document Location
For understanding the features of Dell Lifecycle
Controller (LCC), see the Dell Lifecycle Controller
User’s Guide.
Dell.com/idracmanuals
For information about partner programs enterprise
systems management, see the OpenManage
Connections Enterprise Systems Management
documents.
Dell.com/
omconnectionsenterprisesystemsmanagement
For information about connections and client
systems management, see the OpenManage
Connections Client Systems Management
documentation.
Dell.com/dellclientcommandsuitemanuals
For information about viewing inventory,
performing configuration and monitoring tasks,
remotely turning on or off servers, and enabling
alerts for events on servers and components using
the Dell Chassis Management Controller (CMC),
see the CMC User’s Guide.
Dell.com/esmmanuals
Working with Dell PowerEdge
RAID controllers
For information about understanding the features
of the Dell PowerEdge RAID controllers (PERC)
and deploying the PERC cards, see the Storage
controller documentation.
Dell.com/storagecontrollermanuals
Understanding event and error
messages
For information about checking the event and error
messages generated by the system firmware and
agents that monitor system components, see the
Dell Event and Error Messages Reference Guide.
Dell.com/openmanagemanuals > OpenManage
software
14 Documentation resources

Technical specifications
The technical and environmental specifications of your system are outlined in this section.
Chassis dimensions and weight
Figure 6. Chassis dimensions of the PowerEdge FC430 system
Table 8. Dimensions of the PowerEdge FC430 system
System X Y Z
FC430 102.7 mm 40.3 mm 480.36 mm
Table 9. Chassis weight
System Chassis weight
FC430 3.0 kg (6.61 lb)
Processor specifications
The PowerEdge FC430 system supports up to two Intel Xeon E5-2600 v4 processors.
System battery specification
The PowerEdge FC430 system supports CR 2032 3.0-V lithium coin cell system battery.
3
Technical specifications 15

Memory specifications
The PowerEdge FC430 system supports DDR4 registered DIMMs (RDIMMs and LRDIMMs).
Table 10. Memory specifications
Memory module sockets Memory capacity Minimum RAM Maximum RAM
Eight 288-pin 4 GB, 8 GB, 16 GB, and 32 GB
(RDIMMs)
4 GB (RDIMM) 256 GB (RDIMM)
64 GB (LRDIMM) 64 GB (LRDIMM) 512 GB (LRDIMM)
RAID controller
The PowerEdge FC430 system supports PERC S130 controller.
Drive specifications
SSD specification
The PowerEdge FC430 system supports up to two 1.8-inch uSATA SSDs.
Ports and connectors specifications
USB ports
The PowerEdge FC430 system supports:
• One 4-pin, USB 3.0 compliant port
• USB management port or iDRAC Direct port which supports USB 2.0 compliant port
QSFP+ port
The QSFP+ port is used for Infiniband or Ethernet.
PCIe Mezzanine card
The PowerEdge FC430 system supports one PCIe x8 mezzanine slot supporting a single or dual port InfiniBand mezzanine card.
Video specification
The PowerEdge FC430 supports Matrox G200eR2 video controller. The available memory is 16 MB which is shared with the iDRAC
application memory.
16 Technical specifications

Environmental specifications
NOTE: For additional information about environmental measurements for specific system configurations, see Dell.com/
environmental_datasheets.
Table 11. Temperature specifications
Temperature Specifications
Storage –40°C to 65°C (–40°F to 149°F)
Continuous operation (for altitude less than 950 m or
3117 ft)
10°C to 35°C (50°F to 95°F) with no direct sunlight on the equipment
Maximum temperature gradient (operating and
storage)
20°C/h (36°F/h)
Table 12. Relative humidity specifications
Relative humidity Specifications
Storage 5% to 95% RH with 33°C (91°F) maximum dew point. Atmosphere must be non-
condensing at all times.
Operating 10% to 80% RH with 29°C (84.2°F) maximum dew point.
Table 13. Maximum vibration specifications
Maximum vibration Specifications
Operating 0.26 Grms at 5 Hz to 350 Hz (all operation orientations)
Storage 1.87 Grms at 10 Hz to 500 Hz for 15 minutes (all six sides tested)
Table 14. Maximum shock pulse specifications
Maximum shock pulse Specifications
Operating One shock pulse in the positive z axes of 31 G for 2.6 ms in all operational
orientations.
Storage Six consecutively executed shock pulses in the positive and negative x, y, and z
axes (one pulse on each side of the system) of 71 G for up to 2 ms.
Table 15. Maximum altitude specifications
Maximum altitude Specifications
Operating 3048 m (10,000 ft)
Storage 12,000 m (39,370 ft)
Technical specifications 17

Table 16. Operating temperature de-rating specification
Operating temperature de-rating Specifications
Up to 35°C (95°F) Maximum temperature is reduced by 1°C/300 m (1°F/547 ft) above 950 m (3,117
ft)
Particulate and gaseous contamination specifications
The following table defines the limitations that will help avoid any damages to the IT equipment and/or failure from particulates and
gaseous contamination. If the levels of particulates or gaseous pollution exceed the specified limitations and result in equipment damage or
failure, you may need to rectify the environmental conditions. Re-mediation of environmental conditions is the responsibility of the
customer.
Table 17. Particulate contamination specifications
Particulate contamination Specifications
Air Filtration Data center air filtration as defined by ISO Class 8 per ISO 14644-1 with a 95%
upper confidence limit.
NOTE: This condition applies to data center environments only. Air
filtration requirements do not apply to IT equipment designed to be used
outside a data center, in environments such as an office or factory floor.
NOTE: Air entering the data center must have MERV11 or MERV13
filtration.
Conductive dust Air must be free of conductive dust, zinc whiskers, or other conductive particles.
NOTE: This condition applies to data center and nondata center
environments.
Corrosive dust • Air must be free of corrosive dust.
• Residual dust present in the air must have a deliquescent point less than 60%
relative humidity.
NOTE: This condition applies to data center and nondata center
environments.
Table 18. Gaseous contamination specifications
Gaseous contamination Specifications
Copper Coupon Corrosion <300 Å/month per Class G1 as defined by ANSI/ISA71.04-1985.
Silver Coupon Corrosion <200 Å/month as defined by AHSRAE TC9.9.
NOTE: Maximum corrosive contaminant levels measured at ≤50% relative humidity.
18 Technical specifications

Standard operating temperature
Table 19. Standard operating temperature specifications
Standard operating temperature Specifications
Continuous Operation (for altitude less than
950 m or 3117 ft)
10°C to 35°C (50°F to 95°F) with no direct sunlight on the equipment.
Expanded operating temperature restrictions
Table 20. Expanded operating temperature restrictions
System Processor
configuration (in
watts)
DIMM Operating temperature
Dual processor system
120 W RDIMM: 4 GB, 8 GB, 16 GB, and 32 GB Up to 25ºC ambient
120 W LRDIMM: 64 GB Up to 20ºC ambient
105 W RDIMM: 4 GB, 8 GB, 16 GB, and 32 GB Up to 30ºC ambient
105 W LRDIMM: 64 GB Up to 25ºC ambient
90 W RDIMM: 4 GB, 8 GB, 16 GB, and 32 GB
LRDIMM: 64 GB
Up to 30ºC ambient
<=85 W RDIMM: 4 GB, 8 GB, 16 GB, and 32 GB Up to 35ºC ambient
<=85 W LRDIMM: 64 GB Up to 30ºC ambient
Single processor system
140 W RDIMM: 4 GB, 8 GB, 16 GB, and 32 GB
LRDIMM: 64 GB
Up to 30ºC ambient
135 W RDIMM: 4 GB, 8 GB, 16 GB, and 32 GB
LRDIMM: 64 GB
Up to 30ºC ambient
<=120 W RDIMM: 4 GB, 8 GB, 16 GB, and 32 GB
LRDIMM: 64 GB
Up to 35ºC ambient
Technical specifications 19

Initial system setup and configuration
Setting up your system
Complete the following steps to set up your system:
1 Unpack the sled.
2 Remove the I/O connector cover from the sled connectors.
CAUTION: While installing the sled, ensure that it is properly aligned with the slot on the enclosure to prevent damage to the
sled connectors.
3 Install the sled in the enclosure.
4 Turn on the enclosure.
NOTE: Wait for the chassis to initialize before you press the power button.
5 Turn on the sled by pressing the power button on the sled.
Alternatively, you can also turn on the sled by using:
• The sled iDRAC. For more information, see the Log in to iDRAC section.
• The enclosure Chassis Management Controller (CMC), after the sled iDRAC is configured on the CMC. For more information, see
the CMC User’s Guide at Dell.com/idracmanuals.
Related links
Log in to iDRAC
iDRAC configuration
The Integrated Dell Remote Access Controller (iDRAC) is designed to make system administrators more productive and improve the
overall availability of Dell systems. iDRAC alerts administrators to system issues, helps them perform remote system management, and
reduces the need for physical access to the system.
Options to set up iDRAC IP address
You must configure the initial network settings based on your network infrastructure to enable the communication to and from iDRAC. You
can set up the IP address by using one of the following interfaces:
Interfaces Document/Section
iDRAC Settings
utility
See Dell Integrated Dell Remote Access Controller User's Guide at Dell.com/idracmanuals
Dell Deployment
Toolkit
See Dell Deployment Toolkit User’s Guide at Dell.com/openmanagemanuals
Dell Lifecycle
Controller
See Dell Lifecycle Controller User’s Guide at Dell.com/idracmanuals
CMC Web interface See Dell Chassis Management Controller Firmware User’s Guide at Dell.com/esmmanuals
4
20 Initial system setup and configuration