Kyvol Cybovac E31 User manual

Cybovac E31
User Manual • Uživatelský manuál •
Užívateľský manuál • Használati utasítás •
Benutzerhandbuch •Manuel de l'utilisateur

2
English
3 –45
Čeština
46 –88
Slovenčina
89 –132
Magyar
133 –175
Deutsch
Français
176 –220
221 –264

3
The product user guide contains product features, how to use, and the operating
procedure. Read the user manual carefully to get the best experience and avoid
unnecessary damage. Keep this manual for future reference. If you have any questions
or comments about the device, please contact the customer line.
✉www.alza.co.uk/kontakt
✆[phone]
Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz

4
IMPORTANT SAFETY INSTRUCTIONS
READ THESE INSTRUCION BEFORE USING THIS CYBOVAC.
IT IS INTENDED FOR HOUSEHOLD USE ONLY.
•This Cybovac could be used by users aged from 8 and above, but for the persons
with reduces physical, sensory or mental capability, or by people who are lack of
related experience and knowledge, only if they have received proper supervision
or instructions by a professional who knows how to use the appliance in a safe
way and understand the hazards involved.
•DO NOT let children or your pet play with appliance. Do not allow them to sit or
stand on the appliance either.
•DO NOT use the accessories or replacement parts from unauthorized channels.
Only use the ORIGINAL parts provided by KYVOL. Please directly contact us
whenever they are needed.
•DO NOT operate the appliance on the wet surfaces, or in a bathroom, or near a
pool. Additionally, do not spill any water on the appliance, or expose it to any
moisture, rain or snow.
•DO NOT let the appliance lto clean a room where an infant or child is unattended.
•DO NOT utilize the appliance to pick up anything that is burning or smoking, such
as cigarettes, matches, or hot ashes, etc., to avoid catching fire.
•DO NOT place anything on the appliance or hit against the appliance.
•DO NOT handle any part of the appliance with wet hands.
•DO NOT operate the appliance on waxed floor, which may result in the damage
to the appliance or the floor. It´s recommended to use the appliance or any hard
or carpeted floors.
•NEVER use the power cable or plug that partly damaged.
•DO NOT allow this appliance to clean anything wet, like paint, chemicals , etc…
•DO NOT utilize the appliance to clean flammable or combustible liquids, such as
petrol, or use it in areas where there exists vapor.
•DO NOT apply any fragrance or scented products to the filter of this appliance
because the chemicals in such items are flammable which may lead to fire.
•DO NOT operate the appliance in the room where there are open fireplaces, lit
candles or fragile objects on the floor or where are candles on candles on
candlesticks, tables, etc., which may accidentally hit or bump into, thus leading to
fire causing damage to the appliance.
•DO NOT operate this appliance in areas where exist exposed electrical outlets on
the floor.
•This appliance is designed to be used on floors without scratching them. Before
cleaning your whole house, it´s advised to perform a pre-test on your floor to
ensure that no scratches are made.

5
•Ensure that everyone in the room is aware of the appliance when cleaning to
avoid stepping on it or tripping hazard.
•Make sure the Dust Bin or the Filter are in place before using this appliance.
•Remove all power cords and other items that could get tangled in the appliance
from the area to be cleaned before use.
•Before cleaning, please pick up some objects like loose clothing or paper due to
the limited size of the openings. Otherwise, the openings may be blocked.
•Keep the appliance free of lint, hair, and anything that may reduce airflow.
•Please use two hands to carry the appliance to move it.
•Clean the appliance with a dry or damp cloth.
•The Power Adapter of Charging Base must be removed from the socket before
cleaning or maintaining.
•Cleaning and maintenance shall not be done by the children without any adult
supervision.
•Unplug the Charging Base when not in use for extended periods.
•We assume no liability or responsibility for any fire, explosion or electrical shock
cause by improper operation.
BATTERY
•A rechargeable Li-ion battery is installed in the robot.
•DO NOT attempt to disassemble or replace the battery in the robot by yourself as
the incorrect operation might cause overheating, fire or injury.
•DO NOT expose the battery pack inside of the appliance to any fire, heat source,
direct sunlight or high temperature, which may result in the risk of explosion.
•DO NOT dispose of this appliance or the battery pack in fire, aby water or other
liquids to avoid the risk of explosion.
•The Li-ion battery in the robot should be serviced or recycled by an authorized
service provider and must be recycled or disposed of separately from household
waste. Dispose of the battery according to your local environmental laws and
regulations.

6
PACKING LIST
Robot Vacuum Cleaner E31
(Dust Bin Included)
Charging Base
Remote and AAA
Batteries
Cleaning Brush
Side Brush x 2
Spare HEPA and
Sponge
Power Adapter
(for Charging Base)
Magnetic Strip
(6.6ft/2m)
3M Adhesive Pads
User Manual
User Guide for KYVOL
APP
Quick Start
Water Tank (with
Washable Mopping Cloth)
Spare Washable
Mopping Cloth

7
PRODUCT OVERVIEW
ROBOT VACUUM CLEANER
Bumper
Start/Stop
Wifi Status Indicator
Return to Charging
Base
Brush Guard
Buzzer
Main Brush
Left Wheel
Anti-drop Sensor
Side Brush Mount
Charging Contact
Hall Sensor
Omni-directional Wheel
Dust Bin
Power Switch
Right Wheel
Battery Comparment
Anti-drop Sensor
Optical Flow Sensor
Charging Contact
Hall Sensor
Anti-drop Sensor
Infrared Sensors
Infrared Sensors
Air Outlet

8
CHARGING BASE
REMOTE
Power Indicator
Infrared Sensor
Charging Contact
Charging Contact
DC In
Storage Space for
Adapter´s Power Cord
Auto Mode
Forward
Leftward
Time Setup
Spot Mode
Minimum/Medium
Suction Power
LED Display
Return to Charging Base
Start/Pause
Rightward
Backward
Cleaning Schedule Setup
Edge Mode
Maximum/Medium
Suction Power

9
GETTING STARTED
Peel off sticker to that reminds you of
discovering Power Switch.
Remove the protection material from
both sides of the Cybovac.
Attach the Side Brushes into the Side
Brush Mounts on the bottom of the
Cybovac.
Install the AAA batteries into the Remote.

10
Please the Charging Base on the flat surface against the wall, then connect the Power
Adapter into the base and a socket at room. Remove all objects within approximately a
1-2m radius of the base.
Notes:
1. Ensure the base is lowered, which is indicated by a solid white Power Indicator on
it.
2. Place the Charging Base where the Cybovac can easily access.
3. Always keep the Charging Base connecting to power to avoid that the robot can´t
find the Charging Base when its battery gets low.
4. It´s recommended to tidy any surplus power cord into the Storage Space on the
back of the base, which may help robot reduce the possibility of getting stuck.
Please fully charged your robot before your first use. Manually align the Charging
Contacts on the bottom of the robot with those on the Charging Base.

11
Notes:
1. It takes the 6.5 hours reach a full charged, which could last to clean for
around 150 minutes with Auto Mode and the minimum suction power.
2. The robot will find and return to the Charging Base when the battery gets low,
while it will not move when the battery gets critical low, please manually get it
to charge.
3. To extend the battery´s lifespan, please recharge the robot at least once
every 3 months if not using it for long periods of time.
4. Do not open the battery compartment and replace the battery by yourself. If
the robot won´t charge, please contact us at s[email protected] for further
assistance.
OPERATION GUIDE
CLEANING PREPARATION
Check and tidy the area to be cleaned to ensure a worry-free operation.
Pulse orange
Charging:
Fully Charged:
Low Battery:
Critical Low Battery:
Solid blue
Solid orange
Flash red

12
Notes:
1. Remove any object that may entangle the robot, such as power, cords, ropes, etc.
2. The robot can climb to the top of the objects with a thickness less than 15mm.
Please take the objects away if you do not want the robot to climb then.
3. Do not operate the robot on the wet floor.
4. Keep the robot away from any furniture that may he the space <72mm(because
the thickness of the robots is 72mm) on the bottom. The robot may get stuck if it
goes in by accidently. The Magnetic Strip could be used in this situation.
5. The robot may not run on certain dark or black coloured surfaces, since the Anti-
drop Sensors that recognize an edge of a stair may regard this colour as and
edge, then the robot will not clean over it.
6. Fold the tasseled edges underneath the area rugs to prevent tangling the robot.
POWER ON/OFF
Press the Power Switch to ON on the bottom of the robot to power it on, to power it off,
press the Power Switch to OFF
CLEANING MODES
Auto Mode
After powering on press on the robot or on the remote initiate Auto Mode
process, in which the robot will clean all accessible space with medium suction power
(this is the default level) until the battery gets low.
ON OFF

13
•Press on the robot or on the remote to pause the cleaning process, press
again to resume.
•Press on the robot or on the remote to pause the cleaning process, then
press on the remote to manually adjust the direction of the robot.
•Press on the Cybovac or the remote to get it back to the Charing Base.
•Press on the remote to adjust the levels of the suction power.
•Press for the minimum level, press it again to get back to the medium level.
•Press for the maximum level, press it again to get back to the medium level.
Tips:
1. When the battery gets low, the robot will return to the Charging Base to make a
self-charging. We recommend to fully charge the robot, then operate it as
needed. If no cleaning plans, please let the robot always connect with the
Charging Base.
2. If you set a schedule for Auto Mode, the robot will beep to respond to the
schedule even in low battery status, but can´t perform the cleaning due to the
low battery.
3. If the robot is not managed to find the Charging Base due to obstacles or getting
stuck, please manually get it to contact with the Charging Base.

14
Spot Mode
This cleaning mode aims to intensively clean a specific area.
Step 1:
Locate any area where needs to be cleaned intensively, namely there exist much debris
or dust the move the robot to the center of the area.
Step 2:
Press to initiate the spot cleaning process in a spiral pattern. The maximum
diameter of the spiral circle is around 1.2 meter (3.9ft). The process will last around 2
minutes, then the robot will go into standby mode if no any operation is resumed.
•Press on the robot or on the remote to pause the current cleaning process,
press again to switch to Auto Mode. If you´d like to resume spot mode, press
on the robot or on the remote to pause the auto mode, then press again.
•Press on the robot or on the remote to pause cleaning process, then press
on the remote to manually adjust the direction of the Cybovac.
•Press on on the robot or the remote to get it back to the Charging Base.
Tips:
1. When the battery gets low, the robot will return to the Charging Base to make a
self-charging. We recommend to fully charge the robot, the operate it as needed.
If no cleaning plans, please let the robot always connect with the Charging Base.
2. If the robot is not managed to find the Charging Base due to obstacles or getting
stuck, please manually get it to contact with the Charging Base.

15
Edge Mode
This mode is to thoroughly clean the edges along the wall or any furniture.
Press on the remote to begin the edge cleaning process. The robot will clean for
around 20 minutes along any edges, then return to the Charging Base.
•Press on the robot or on the remote to pause the cleaning process, press
again to switch to Auto Mode. If you´d like to resume edge mode, press on the
robot or on the remote to pause the auto mode, the press again.
•Press on the remote or on the remote to pause the cleaning process, then
press on the remote to manually adjust the direction of the robot.
•Press on the robot or the remote to get it back to the Charging Base.
Tips:
1. When the battery gets low, the robot will return to the Charging Base to make a
self-charging. We recommend to fully charge the robot, then operate it as
needed. If no cleaning plans, please let the robot always connect with the
Charging Base.
2. If the robot is not managed to find the Charging Base due to obstacles or getting
stuck, please manually get it to contact with the Charging Base
AUTO CARPET BOOST
The robot will automatically increase its suction power on carpet to provide a deeper
clean. When on a hard surface, the robot will return to the medium suction power to
provide just right amount of power without wasting its battery.
Tip:
If the level of the suction power is the maximum level before cleaning a carpet, the robot
will continue cleaning the carpet with the maximum power after moving on the carpet.

16
MOPPING THE FLOOR
Step 1:
Fill the Water Tank with water.
Step 2:
Press and hold the latch down to pull the Dust Bin out.

17
Step 3:
Press and hold the latch down and insert the Water Tank into the robot.
Step 4:
Select a cleaning mode to start mopping the floor.
Tip:
Go to Kyvol APP to adjust the water volume for mopping.
Notes:
1. Take out the Water Tank when the robot is charging or not in use.
2. Only use water in the Water Tank. Do not use any cleaning solution, even natural
ones, which will cause damage to the robot.
3. Do not mop the carpeted floor.
4. The robot cleans best on smooth hard surfaces any may not perform as well on
uneven or rough surfaces.
5. Do not leave the robot unattended when using it to mop the floor.
TIME SETUP
Power on the robot by pressing the
Power Switch to ON.
Press on the remote, and the HOUR
will flash on the LED Display.

18
Press to change the HOUR.
Press to move to the option of MINUTE.
Press to adjust the value of MINUTE.
Press or to save the time you set.
A beep from the robot indicate the
successful setting.
Tip:
Make sure you the remote and the are as close as possible when setting the time.
CLEANING SCHEDULE SETUP
Important:
Make sure you´ve set up the time according to your local time before setting a cleaning
schedule.
The function of setting cleaning schedules is only available for Auto Mode. After setup,
your robot will start cleaning at the scheduled time.

19
Power on the robot by pressing the
Power Switch to ON.
Press on the remote to start setting a
schedule, the HOUR will flash on the LED
Display.
Press to change the HOUR.
Press to switch from HOUR to MINUTE.
Press to adjust the value of MINUTE.
Press or to save the setting. A
beep from the robot indicates the
successful setting.

20
Tips:
1. Make sure the option of AM/PM is set correctly.
2. You can only select from options of 15, 30, 45 an 00 when setting MINUTE.
3. Make sure the remote and the robot are as close as possible when setting the
schedule.
4. Only one schedule can be set when using the remote, and the schedule can be
cancelled permanently by long pressing on the remote. Two beeps from the
robot indicate the successful setting.
SLEEP MODE
To reduce battery consumption, the robot will go into the Sleep Mode when it is idle for
5 minutes, press on the robot or any button on the remote to wake it up. The you can
press the corresponding button to operate the robot to clean as needed.
USING THE MAGNETIC STRIP
Magnetic Strip aims to set no-go areas such as pet food bowls or beds, as well as to
prevent entering rooms if desired.
Step 1:
Verify the area you do not want the robot to access.
Step 2:
Correctly measure the length and width of the area, then cut the strip to proper length.
Step 3:
Peel of a piece of 3M Adhesive Pad, then affix it to one side of the Magnetic Strip, so do
the other 3M Adhesive Pads.
Tip:
The number of Adhesive Pads varies depending on the strip length.