La Crosse Technology W88723 User manual

Model: W88723 www.lacrossetechnology.com/support Page | 1
Model: W88723
Instruction Manual
DC: 101215
MULTI-COLOR ALARM CLOCK
Manual Set Time, Perpetual Calendar,
Weekday and Low Battery Indicator
Indoor Temperature with Trend Indicators,
Moon phase + Two Time Alarms.
BACK
VIEW
USB Port
FRONT
VIEW
BUTTONS
AC Power Jack
HX06-0501200-AU
DC 5.0V
Battery
Compartment
2 “AAA”

Model: W88723 www.lacrossetechnology.com/support Page | 2
GET STARTED
Step 1: Insert 5 volt AC power cord into the wall then into the bottom of
the alarm clock.
Step 2: Insert 2 new AAAAlkaline batteries (not included) into the alarm
clock. Observe the correct polarity.
Restart: If there is no indoor temperature data after 60 seconds, unplug
the AC adapter and remove batteries from the alarm clock, press any
button 20 times. After 15 minutes, return to Step 1 above.
SET TIME & DATE
1. Hold the SET button to enter time set mode.
2. Press the +or -buttons to adjust values.
3. Press the SET button to confirm adjustments and move
to the next item.
TIME SET ORDER:
1. Hour
2. Minutes
3. Year
4. Month
5. Date
Press the SET button to exit, or wait 20 seconds without pressing
buttons to return to the normal time display.
12/24 HOUR TIME FORMAT
•Press the +button to select 12 hour or 24 hour time
format.
FAHRENHEIT/CELSIUS
•Press the -button to select temperature readings in
Fahrenheit or Celsius.
ADJUST BACKLIGHT HI/LOW/OFF
When using A/C power:
•Press the LIGHT HI/LOW/OFF button to adjust the
backlight.
When using Battery power only:
•Press the LIGHT HI/LOW/OFF button for a 10 second backlight.

Model: W88723 www.lacrossetechnology.com/support Page | 3
USB CHARGING PORT
Charge a smart phone, camera or other devices when the
alarm clock is plugged into a power outlet with the
included 5V AC adapter.
•Connect your external device’s USB charging cable
(not included) to the USB charging port.
•Charging times will vary.
•USB Power Output: 1A maximum current. Charge 1A devices or
devices that are self-regulating.
NOTE: This is a power-output charging port. It does not supply power to
the alarm clock.
NOTE: Some USB cables are for data transfer only and cannot be used
for charging. Make sure that the USB cable you use will charge your
device. Most USB cables included with mobile devices will work for
charging.
SET TIME ALARMS
Setting the alarm and activating the alarms are separate
actions.
1. Press and release the ALARM button to select Alarm 1
or Alarm 2.
2. Hold the ALARM button for 5 seconds to enter alarm
time set mode. The alarm hour will flash.
3. Press the +or -buttons to adjust the alarm hour.
4. Press the ALARM button to confirm and move to the
alarm minutes.
5. Press the +or -buttons to adjust the alarm minutes.
6. Press the ALARM button to confirm and exit.
Alarm Time setting order: 1. Hours, 2. Minutes
Note: The alarm is crescendo sound. The alarm will sound for 2 minutes
and then shut off completely if no buttons are pressed.
ACTIVATE/DEACTIVATE TIME ALARM
•Press and release the ALARM button to select Alarm 1
or Alarm 2.
•Press the ALARM ON/OFF button to activate the
selected alarm. Once activated, the bell icon appears.
•Press the ALARM ON/OFF button again to deactivate the
selected alarm. The bell icon will disappear.
Alarm Bell

Model: W88723 www.lacrossetechnology.com/support Page | 4
SNOOZE (SILENCES ALARM TEMPORARILY)
•When alarm sounds, press the SNOOZE button to silence the alarm
for 9 minutes.
•The alarm icon will flash.
•To stop alarm for one day, press any button, while in
snooze mode.
•The alarm icon will show solid
TEMPERATURE TREND INDICATORS
The temperature (2°F / 1°C) trend indicators update every 30 minutes or
less.
•Temperature has risen in the past 3 hours.
•Temperature has not changed in the past 3 hours.
•Temperature has fallen in the past 3 hours.
MOON PHASE
The moon phase is based on the Gregorian calendar and the year,
month and date set. Most Internet moon phase calculations are based on
the lunar calendar.
LOW BATTERY ICON
View full warranty details online at: When the icon is displayed
in the upper right hand corner, replace batteries in the alarm
clock.
ALARM CLOCK CARE AND MAINTENANCE
•Do not mix old and new batteries
•Do not mix Alkaline, Standard, Lithium or Rechargeable Batteries
•Always purchase the correct size and grade of battery most suitable for
intended use.
•Replace all batteries of a set at the same time.
•Clean the battery contacts and also those of the device prior to battery
installation.
Low
Battery
Icon

Model: W88723 www.lacrossetechnology.com/support Page | 5
•Ensure the batteries are installed with correct polarity (+and -).
•Remove batteries from equipment which is not to be used for an extended
period of time.
•Remove expired batteries promptly.
•Improper use or unauthorized opening of housing voids warranty.
•If the alarm clock is not working properly, change the batteries and/or check
the A/C cord connection.
SPECIFICATIONS
Indoor Temperature Range: +32°F to +122°F (0°C to 50°C)
Power:
Alarm Clock:5V A/C power adapter (included)
AC Adapter No: HX06-0501200-AU
Battery backup: 2-AAA, IEC, LR3 batteries (not included)
Battery Life: Battery life is over 12 months when using the AC
adapter for primary power
USB: Output 1 Amp maximum current (charging cable
not included)
Dimensions: 5.9" L x 1.9" D x 3.5 " H (150 x 48 x 89 mm)
WARRANTY AND SUPPORT INFORMATION
La Crosse Technology, Ltd. provides a 1-year limited time warranty (from date of
purchase) on this product relating to manufacturing defects in materials &
workmanship.
Before returning a product, please contact our friendly customer support
with questions or visit our online help (manuals and FAQS):
Phone: [phone]
Online Product Support: www.lacrossetechnology.com/support
Product Registration:
www.lacrossetechnology.com/support/register
View full warranty details online at:
www.lacrossetechnology.com/warranty_info.pdf
Warranty Address:
La Crosse Technology, Ltd
2830 S. 26th St.
La Crosse, WI 54601

Model: W88723 www.lacrossetechnology.com/support Page | 6
FCC STATEMENT
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
This device must not be co-located or operating in conjunction with any other
antenna or transmitter.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that
may cause undesired operation.
Caution!
The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modifications to this equipment. Such modifications could void the
user authority to operate the equipment.
All rights reserved. This manual may not be reproduced in any form, even in part,
or duplicated or processed using electronic, mechanical or chemical process
without the written permission of the publisher.
This booklet may contain errors or misprints. The information it contains is
regularly checked and corrections are included in subsequent editions. We
disclaim any responsibility for any technical error or printing error, or their
consequences.
All trademarks and patents are recognized.
CANADA STATEMENT
This device complies with Industry Canada’s license-exempt RSSs. Operation is
subject to the following two conditions:(1) This device may not cause
interference; and(2) This device must accept any interference, including
interference that may cause undesired operation of the device.