La Crosse Technology 308-1415V3 User manual

SET UP GUIDE
MODEL: 308-1415v3 / 308-1415v4
WIRELESS
TEMPERATURE STATION

Power Up
2
AA
AA
Outdoor Sensor
TX141-Bv3
or TX141-Bv4
1. Insert 2-AA batteries into your Outdoor Sensor.
2. Insert the 5 volt power cord into the outlet, then into your
Temperature Station. Optional: Insert 2-AA batteries for backup.
3. Once the Outdoor Sensor is reading to your station, place it
outside in a shaded location to protect from the sun’s heat.
Watch the sensor mounting video: bit.ly/th_sensor_mounting
AA AA
Temperature Station
308-1415v3 or
308-1415v4
·Press the MODE button to select between full Weekday or
Calendar (Weekday, Month, Date) display.
Custom Date Display

Settings Menu
1. Hold the MODE button to enter the Settings Menu.
2. Use the + / - button to adjust, and MODE to confirm.
Settings Menu order:
• Language (English, Spanish, French)
• Beep ON/OFF
• 12/24 Hour Time
• Hour
• Minutes
• Year
• Month
• Date
• Fahrenheit/Celsius
Language: When Español or Francais is selected, the following instructions
and weekday will be presented in that language.
Weekday: Weekday sets automatically when Year, Month and Date are set.
3

4
Adjustable Backlight
• When operating with the power cord, the backlight is constant and
adjustable.
• Press the LIGHT button to change the backlight brightness (HI/LO/OFF)
• When operating on batteries alone, press the LIGHT button to activate the
backlight for 10 seconds.
MODE Press to view full Weekday or Calendar display.
Hold to enter the Settings Menu.
+ (PLUS)
Press to view HI/LO Records.
When viewing HI/LO Records: Hold to delete a record.
Settings Menu: Press to increase value.
Hold to increase quickly.
- (MINUS)
Settings Menu: Press to decrease value.
Hold to decrease quickly.
Search for Sensor: Hold to search for outdoor sensor.
LIGHT Press to adjust backlight HI-LO-OFF.
The buttons are located on the front of your station.
Button Functions

5
HI/LO Temperature Records
The indoor and outdoor HI/LO temperature records will reset daily at
midnight. This provides a daily 24 hour HI/LO reading.
View: Press the +button to view HI and LO Records since midnight.
Reset: While viewing individual records, hold the + button to reset to current
temperatures.
Temperature Trend Arrows
Both the Indoor and Outdoor temperature have Trend Arrows to indicate
temperature changes (2°F / 1°C) over the past three hour period.
Temperature has risen over the past 3 hours.
Temperature has been steady over the past 3 hours.
Temperature has fallen over the past 3 hours.

6
Search for Outdoor Temperature
If you are seeing dashes for your outdoor readings, please try the
following steps:
1. Hold the -button to search for your outdoor sensor. The Reception
Indicator will begin to animate.
2. If after 3 minutes the sensor still isn’t connected, bring the sensor inside
next to the display and remove power from both the sensor and clock.
3. Press any button on the clock 20 times and leave the parts sit for a few
moments with the power o.
4. Install a new set of alkaline batteries into the sensor, then into your clock.
For additional help visit: bit.ly/basic_restart
5. If your outdoor data is still not appearing after these steps, please
contact our support sta via the links below.
Low Battery Indicator
By the Indoor Temperature, replace batteries in the station.
By the Outdoor Temperature, replace sensor batteries.
• The Sensor Weather Shield is designed to protect your
outdoor sensor from rain and snow.
• This shield will oer limited protection from the sun’s heat.
• Optional purchase at: bit.ly/925-1418
Sensor Shield (not included)

7
Stay in Touch
Follow La Crosse Technology on YouTube,
Twitter, Facebook and Instgram.
Ask questions, watch setup videos, and
provide feedback on our social media outlets.
Specifications
308-1415v3 or 308-1415v4
Temperature Range: 32°F to 122°F
(0°C to 50°C)
Power: 5-volt power adapter included
AC6#: GPU280500150WA00
Optional: 2-AA batteries sold separately
The plug on the power adapter is intended to serve as the
disconnect device, the socket-outlet shall be installed near
the equipment and shall be easily accessible.
Battery Life: Over 24 months
Dimensions: 3.24” L x 2.16” D x 5.98” H
(8.23cm L x 5.48cm D x 15.19cm H)
TX141-Bv3 or TX141-Bv4
Outdoor Temperature Range: -40°F to 140°F
(-40°C to 60°C)
Transmission Range: 330 ft (100m) open air,
RF 433MHz
Power: 2-AA batteries sold separately
Battery Life: Over 24 months
Dimensions: 1.57” L x 0.82” W x 5.11” H
(3.98 cm L x 2.08cm W x 12.98cm H)
Designed in La Crosse, Wisconsin •Made in China •Printed in China •DC 091021
If you require additional support, get in touch
with our friendly customer support team
based in La Crosse, WI.
Phone: [phone]
Online: bit.ly/contact_techsupport
Our knowledgable customer support team is
available: Mon-Fri 8am-6pm CST
We’re Here to Help
This product can expose you to chemicals including
styrene, which is known in the State of California to
cause cancer.
For more information, go to:
www.P65Warnings.ca.gov
WARNING:

8
Warranty Info
La Crosse Technology, Ltd. provides a 1-year
limited time warranty (from date of purchase) on
this product relating to manufacturing defects in
materials & workmanship.
La Crosse Technology, Ltd,
2830 S. 26th St.
La Crosse, WI 54601
For Full Warranty Details, Visit:
www.lacrossetechnology.com/pages/warranty
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment o and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
Connect the equipment into an outlet on a circuit dierent
from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician
for help.
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired operation.
Caution!
Any changes or modifications not expressly approved by
the party responsible for compliance could void the user’s
authority to operate the equipment.
All rights reserved. This manual may not be reproduced
in any form, even in part, or duplicated or processed using
electronic, mechanical or chemical process without the
written permission of the publisher.
This booklet may contain errors or misprints. The information
it contains is regularly checked and corrections are included
in subsequent editions. We disclaim any responsibility for
any technical error or printing error, or their consequences.
All trademarks and patents are recognized.
FCC Statment
Battery Replacement Instructions
When batteries of dierent brand or type are used together,
or new and old batteries are used together, some batteries
may be over-discharged due to a dierence of voltage or
capacity. This can result in venting, leakage, and rupture and
may cause personal injury.
•Always purchase the correct size and grade of battery
most suitable for the intended use.
•Always replace the whole set of batteries at one time,
taking care not to mix old and new ones, or batteries of
dierent types.
•Clean the battery contacts and also those of the device
prior to battery installation.
•Ensure the batteries are installed correctly with regard to
polarity (+ and -).
•Remove batteries from product during periods of non-use.
Battery leakage can cause corrosion and damage to this
product.
•Remove used batteries promptly.
•For recycling and disposal of batteries, and to protect the
environment, please check the internet or your local phone
directory for local recycling centers and/or follow local
government regulations.
Care & Maintenance