La Crosse Technology SW404 User manual

P. 1
INSTRUCTION MANUAL – SW404
WI-FI COLOR WEATHER FORECAST with 5 DAYS
FORECAST

P. 2
POWER UP THE WI-FI WEATHER STATION
Insert the 5V 1.2A AC/DC adaptor (included) to an AC wall outlet and then
the DC jack to the back of your clock to power your clock.
Remark: make sure 5V~ adaptor is being connected. Using adaptors with
higher voltage (e.g. 6V - 9V) will damage your clock
INSTALL THE WIRELESS OUTDOOR TRANSMITTER
After you install batteries to the wireless outdoor transmitter, your weather
station will receive outdoor temperature from it in few seconds. Then place
your outdoor transmitter in a dry and shaded area outdoor.

P. 3
The temperatures readings will get stable and become more accurate after
the unit is powered up for around 30 minutes.
REMARKS:
Keep in mind that your outdoor transmitter has a 50-meter open air
transmission with no obstructions.
Actual transmission range will vary depending on what is in the path of the
signal. Each obstruction (roof, walls, floors, ceilings, thick trees, etc.) will
effectively cut signal range in half.

P. 4
Insert the holder to the bottom of the outdoor transmitter for desktop or
insert it to the back of the transmitter for wall mount purpose.
CONNECT MOBILE APP WITH THE WI-FI WEATHER
STATION
Download Tuya Smart App:
According to the mobile phone brand, search for graffiti through the IOS
APP Store or Android Google Play, find the APP with the icon below, and
download the APP. At the same time, register an account, open the APP,
log in to the account, and at the same time log in to the hotspot that the
weather station needs to connect to, as a preparation for device pairing.

P. 5
Quick Setup
1. Slide open the battery cover at the back of your wireless outdoor
transmitter, then insert 2 x AAA new alkaline batteries to the battery
compartment. Make sure the Channel selector switch is at 1 position.
Replace the battery cover.
Make sure (Channel 1) is displayed under the outdoor temperature. You could
press to select Channel 1.
2. Then plug the DC jack to the back of your weather station
3. Pair the weather station with WIFI and server information according to
the APP prompts, see WIFI pairing instructions for details.
4. Configure basic settings, set time/date format and units, etc.
5. Move the remote sensor to outdoor or other location after 5 minutes
WIFI pairing
After the weather station is started, it will automatically enter the pairing
mode, and the WIFI icon “”will flash.
Open the Tuya APP, click the “”icon in the upper right corner of
the screen, and select Add Device，The APP interface is converted to add
devices, and the window for discovering devices will automatically pop up,
click Add，After converting the interface, click “ ” according to the
prompts
Then follow the APP prompts, step 4: set the WIFI name and password,
step 5: pairing process, wait for the screen to change to step 6, click Finish,
switch to the main interface of step 7, indicating that the pairing is complete.

P. 6
Step 1 Step 2

P. 7
Step 3 Step 4

P. 8
Step 5 Step 6

P. 9
Step 7

P. 10
Note: The paired WIFI hotspot must be 2.4GHz, this
product only supports 2.4GHz wireless network
□If the product does not automatically enter the pairing
mode when powered on for the first time, you can press and
hold the WIFI button for more than 3 seconds to enter the
pairing mode manually, and the “”in the WIFI signal
icon will flash.
Note : if you need more help concerning Wifi connection, we
invite you to contact our technical department at the
03.88.40.75.36
Temperature Unit
The temperature unit can be set through the APP, as shown
in the legend below, Click “Unit Conversion” in the main
interface, jump to the second interface, click the temperature
unit menu, jump to the third interface, click to select the unit
to be set, and then click "Confirm" to complete the setting.

P. 11
Main interface

P. 12
Second interface Third interface

P. 13
APP setting alarm
According to the picture, switch to the main panel, click
"ALARM SET" in the panel, jump to the second interface,
click the slider to turn on and off the alarm clock, click the
three ALARM columns, jump to the third interface, you can
make an alarm Repeat the setting of time and week, click
"Confirm" to complete the setting after the setting is
completed. All three alarms need to be independently
clicked to set

P. 14
Main interface

P. 15
Second interface Third interface

P. 16
Note: Weekly repetition in the APP can be set independently
for each day
Note: The alarm will sound for 5 minutes if you do not
deactivate it by pressing any button. In this case the alarm
will be repeated automatically after 24 hours.
Note: Rising alarm sound (crescendo, duration: 5 minutes)
changes the volume 3 times whilst the alarm signal is heard.
The recording curve of temperature and humidity in the
APP
Through the APP, you can view the historical changes of
temperature/ humidity of the weather station, display it with a
curve graph, click the "Graph Curve" icon on the main
interface to enter, you can view the daily/ monthly change
curve graph.

P. 17
Main interface Daily graph

P. 18
Monthly graph Conversion channel

P. 19
APP setting temperature alert
According to the picture, switch to the main panel, click
"temperature alert" in the panel, jump to the second interface,
click the corresponding temperature alarm menu of different
channels to jump to the third interface. In the third interface,
click the slider to turn on or off the corresponding alarm
function, and set the upper and lower limits of the alarm by
sliding the temperature value. After the setting is completed,
click "Confirm" to complete the setting

P. 20
Main interface