La Crosse Technology 308-1417BLV2 User manual

WIRELESS WEATHER STATION WITH FORECAST & ATOMIC TIME 1 | PAGE
WEATHER STATION WITH
FORECAST AND ATOMIC TIME
INSTRUCTION MANUAL
MODELS: 3081417BLV2
DC: 112318
FIND MANUALS, FAQS, AND MORE UNDER THE
SUPPORT TAB HERE: bit.ly/308-1417blv2

WIRELESS WEATHER STATION WITH FORECAST & ATOMIC TIME 2 | PAGE
TABLE OF CONTENTS
3. Power Up
3. Settings Menu
5. WWVB Atomic Time Signal
5. Adjustable Backlight
5. Pressure History Graph & Number
6. Weather Forecast Icons
6. HI/LO Temperature & Humidity Alerts
7. Temperature & Humidity Alerts
8. Temperature & Humidity Trend Arrows
8. Sensor Search
9. Change Batteries
9. Factory Restart
9. Sensor Weather Shield
10. We’re Here to Help!
10. Join the Conversation
10. Care and Maintenance
11. Specifications
11. Warranty Info
12. FCC Statement

WIRELESS WEATHER STATION WITH FORECAST & ATOMIC TIME 3 | PAGE
POWER UP
1. Insert 2-AA batteries into your Outdoor Sensor.
2. Insert the 5 volt power cord into an outlet, then into your Weather Station. Optional: Insert 3-AA batteries
for backup.
3. Adjust time and date settings on each display.
4. Once the Outdoor Sensor is reading to each of your displays, place it outside in a shaded location.
Watch sensor mounting video: http://bit.ly/TH_SensorMounting
SETTINGS MENU
1. Hold the SET button to enter the Settings Menu.
2. Use the + or - button to adjust and SET to confirm.
3. Press the SEACH button at anytime to exit the Settings Menu.
Settings Menu order:
• Language: (English, Español, Français)
• Beep ON | OFF
• Atomic ON | OFF
• DST ON | OFF (Daylight Saving Time)
• Time Zone
• 12Hr | 24Hr Format
• Hour
• Minutes
• Year
• Month
• Date
• Temperature Fahrenheit | Celsius
• Pressure units: INHG or HPA
• Pressure number setting
Note: When Español or Francais is selected, the following instructions and weekday will be presented in
that language.
Note: Weekday sets automatically when Year, Month and Date are set.
Time Zones

WIRELESS WEATHER STATION WITH FORECAST & ATOMIC TIME 4 | PAGE
Language Beep ON |OFF Atomic ON | OFF
DST ON | OFF Time Zone 12Hr | 24Hr
Set Hour Minutes
Set Month Set Date Temp ˚F | ˚C
Pressure: INHG | HPA Pressure Number
inHg
RELATIVE
PRESSURE
inHg
RELATIVE
PRESSURE
Set Year

WIRELESS WEATHER STATION WITH FORECAST & ATOMIC TIME 5 | PAGE
ADJUSTABLE BACKLIGHT
• Press and release the LIGHT button to adjust the White Backlight; HI-LOW-OFF.
• When operating on batteries only, press the LIGHT button for a 10 second backlight.
WWVB ATOMIC TIME SIGNAL
• The station will automatically search for the atomic time signal at UTC 7:00, 8:00, 9:00, 10:00, and 11:00.
• The Atomic Time Signal Icon will flash while searching, and be solid when connected.
• Press the SEARCH button anytime, to manually search for the atomic time signal.
• For information about WWVB visit: http://bit.ly/AtomicTime
PRESSURE HISTORY GRAPH & NUMBER
Read from left to right, the Pressure History Graph indicates the rise and fall in air pressure over the past 24
hours.
• The “0h” indicates the current hour, thus the current air pressure also.
• At every full hour the current air pressure is used as a basis for the display of a new graph bar.
• Air pressure trends can be determined by simply glancing at the bar graph.
A. If the bars are rising (higher on the right than the left) then the air pressure has a rising trend, and the
weather should improve.
B. If the bars are dropping (lower on the right than the left) then the air pressure has a falling trend, and
the weather should worsen.
• The bar chart will constantly scroll to provide visual interest. This cannot be turned o.
• The Relative Pressure numbers represent the currect Barometric Pressure reading from the pressure
sensor inside the weather station.
• This number can be adjusted in the Settings Menu, to match your local reporting station.
inHg
RELATIVE
PRESSURE
-24h -18h -12h -9h- 6h -3h0 h
PRESSURE HISTORY

WIRELESS WEATHER STATION WITH FORECAST & ATOMIC TIME 6 | PAGE
FORECAST FORECAST FORECAST
FORECAST FORECAST FORECAST
SUNNY CLOUDSPARTLY SUNNY
RAIN SNOW
T-STORM
WEATHER FORECAST ICONS
• The Weather Forecast Icons are determined by the station’s barometric pressure reading. Please allow
7-10 days for barometric calibration.
• This is your pressure at your stations’ location and may vary slightly from your local reporting station.
• Six forecast icons use changing atmospheric pressure to predict weather conditions for the next 12-hours
with 70-75% accuracy.
• When Outdoor temperature is below 32˚F and the forecast is RAIN or T-STORM, the station will display
SNOW.
All HI/LO temperature/humidity records reset automatically at 12:00 (midnight).
• Press the TEMP button once to view HI indoor and outdoor temperature/humidity records.
• Press the TEMP button a second time to view LO indoor and outdoor temperature/humidity records.
• Press the TEMP button a third time to view outdoor Heat Index.
• Press the TEMP button a fourth time to view outdoor Dew Point.
• Press the TEMP button again to return to normal display.
HI/LO TEMPERATURE & HUMIDITY RECORDS
INDOOR
OUTDOOR
INDOOR
OUTDOOR OUTDOOR OUTDOOR

WIRELESS WEATHER STATION WITH FORECAST & ATOMIC TIME 7 | PAGE
To set alerts:
1. Hold the ALERTS button to enter alert set mode.
2. Outdoor HI temperature alert OFF will show.
3. If you wish to set this alert value, press the + or – buttons to arm this alert (ON).
4. When the alert is armed (ON) the alert value will flash (no additional button press)
5. Press the + or – buttons to change the alert value.
6. Press the ALERTS button to confirm and move to the next alert.
7. If you do not wish to set an alert, press the ALERTS button again to move the next alert.
(When the alert is OFF (disarmed) press ALERTS button to skip setting that alert value).
8. Press and release the ALERTS button until you get to the alert you wish to set.
9. To set the alert, first press the + or – buttons to turn the alert ON (armed).
10. When the alert is armed (ON) the alert value will flash (no additional button press)
11. Press the + or – buttons to change the alert value.
12. Press the ALERTS button to confirm and move to the next alert. Or press the LIGHT button to exit.
TEMPERATURE & HUMIDITY ALERTS
OUTDOOR OUTDOOR
OUTDOOR OUTDOOR
OUTDOOR OUTDOOR
OUTDOOR OUTDOOR
INDOOR INDOOR
INDOOR INDOOR
INDOOR INDOOR
INDOOR INDOOR
Outdoor Temperature Alerts Outdoor Humidity Alerts
Indoor Temperature Alerts Indoor Humidity Alerts

WIRELESS WEATHER STATION WITH FORECAST & ATOMIC TIME 8 | PAGE
Active Alert:
• The alert icon will only show when the alert is active, and indicate HI or LO.
• When armed alert value is reached, station will beep 5 times, once each minute, until out of alert range.
• The flashing alert icon will indicate whether it is a LO or HI alert.
• Press any button to stop the temp alert sound.
• The alert icon will still flash while value is in alert range.
Disarm Alert:
1. Hold the ALERTS button to enter alert setting menu.
2. Press the ALERTS button until you see the alert you wish to
disarm.
3. Press the + or - button to disarm the alert. The alert will not sound.
4. Press the SEARCH button to exit.
TEMPERATURE & HUMIDITY TREND ARROWS
• The UP and DOWN arrows indicate changes in temperature and humidity over the past hour.
• The arrows will update every 15 minutes and compare data from exactly one hour prior.
Temperature: arrow changes every 2 degrees Fahrenheit.
Humidity: arrow changes every 3% RH
SENSOR SEARCH
• If you are seeing dashes in place of outdoor temperature, first check your sensor batteries.
• Hold the SENSOR button for 3 seconds to search for the sensor. Sensor Reception icon will flash while
searching and be solid when sensor signal is received.
• If you regain connection while the sensor is mounted, great. If you do not regain connection, bring the
sensor within 10 feet of the station and search again.
Note:
• If the signal is lost, the RX will display the last data recorded from sensor for 10 minutes.
• After that 10 minutes if the signal does not come back then you will see dashes “--”.
• After 30 minutes, start looking for the sensor signal automatically.

WIRELESS WEATHER STATION WITH FORECAST & ATOMIC TIME 9 | PAGE
CHANGE BATTERIES
We designed this station for convenience, so that a simple change of batteries does not lose your data or
require you to power down your station.
Sensor:
1. When Battery Indicator shows next to the Outdoor Temperature, replace batteries in your Outdoor
Sensor.
2. Then hold the SENSOR button for 3 seconds and your station will search for your sensor.
Station:
1. When Battery Indicator shows next to the Indoor Humidity, change batteries in the station.
2. When changing the batteries in the station, continue using the power cord. After replacing the batteries,
no other action is needed. The batteries in the station only maintain time/date in the event of a power
outage.
FACTORY RESTART
A factory restart of the station returns it to default settings, and “out of the box” condition and may resolve
connection issues.
1. Be sure there are fresh batteries in the sensor and station.
2. Hold the ALERTS and LIGHT button together for 5 seconds to restart the station. This will clear all settings
and history. Station will automatically search for sensor.
SENSOR WEATHER SHIELD-NOT INCLUDED
The Sensor Weather Shield is designed to protect your outdoor sensor from rain and snow. This shield will
oer limited protection from the sun’s heat. Purchase at: http://bit.ly/925-1418

WIRELESS WEATHER STATION WITH FORECAST & ATOMIC TIME 10 | PAGE
If you require additional support, call or customer support team based out of La Crosse, Wisconsin.
Phone: [phone]
Or fill out our online support request form here: bit.ly/contact_techsupport
Our knowledgeable support team is available: Monday-Friday, 8am-6pm CST
Ask questions, watch detailed setup videos, and provide feedback on our social media outlets!
WE’RE HERE TO HELP!
JOIN THE CONVERSATION
CARE AND MAINTENANCE
• Do not mix old and new batteries.
• Do not mix Alkaline, Standard, Lithium, or Rechargeable batteries.
• Always purchase the correct size and grade of battery most suitable for intended use.
• Replace all batteries of a set at the same time.
• Clean the battery contacts and also those of the device prior to battery installation.
• Ensure the batteries are installed with correct polarity (+ and -).
• Remove batteries from equipment which is not to be used for an extended period of time.
• Promptly remove expired batteries.