La Crosse Technology 308-1414Bv3 User manual

SET UP GUIDE
MODEL: 308-1414Bv3 / 308-1414Wv3
WIRELESS COLOR
WEATHER STATION
or

Power Up
2
Outdoor Sensor
TX141TH-Bv4
AA
AA
1. Insert 2-AA batteries into your Outdoor Sensor.
2. Insert the 5 volt power cord into the outlet, then into your Weather
Station. Optional: Insert 3-AAA batteries for backup.
3. Once the Outdoor Sensor is reading to your station, place it outside in a
shaded location to protect from the sun’s heat.
Watch the sensor mounting video: bit.ly/th_sensor_mounting
Weather Station
308-1414Bv3 or
308-1414Wv3
AAA
AAA
AAA
•Your station will automatically search for the Atomic Time Signal at UTC
7:00, 8:00, 9:00, 10:00, and 11:00.
•Press the TIME SET button to manually start or stop a search for the
WWVB Atomic Time Signal.
•The Tower Icon will flash while searching, and remain solid on screen
when the WWVB Signal is received.
•For information about WWVB Atomic Time visit: bit.ly/atomic_time.
Atomic Time

3
Settings Menu
1. Hold the TIME SET button until the display changes to enter the Settings
Menu.
2. Press and release the ARROW buttons to adjust values.
3. Press the TIME SET button to confirm and move to next item.
Settings Menu Order:
•WWVB ON/OFF
•Time Zone
•DST ON/OFF
•12/24 Hour
•Hour
•Minutes
•Year
•Month
•Date
•Fahrenheit or Celsius
WWVB OFF: When WWVB OFF is selected, you will move directly to 12/24
Hour setting.
Weekday: The Weekday will set automatically when your Year, Month and
Date are set.
Time Zones
AST = Atlantic
EST = Eastern
CST = Central
MST = Mountain
PST = Pacific
AKT = Alaska
HAT = Hawaii

Press and release the SNOOZE/LIGHT HI/LOW/OFF button to adjust the
backlight brightness: High • Low • O
Adjustable Backlight
•The Forecast Icons are determined by the station’s barometric pressure
reading. Please allow 7-10 days for barometric calibration.
•This is your pressure at your stations’ location and may vary slightly from
your local reporting station.
•Six forecast icons use changing atmospheric pressure to predict weather
conditions for the next 12-hours with 70-75% accuracy.
•When Outdoor temperature is below 32˚F and the forecast is rain or
T-storm, the station will display Snow.
Note: at elevations above 6.200 feet the forecast icons may not change.
SUNNY SNOWT-STORMRAINCLOUDYPARTLY SUNNY
Forecast Icons
The Forecast Tendancy Arrows tell you at a glance if the pressure is rising,
falling or steady. Rising pressure indicates the weather will improve. Falling
pressure indicates the weather will worsen.
Forecast Tendancy Arrows
4

5
Temperature Alerts
1. Hold the ALERTS button until the display changes to enter the Alert
Settings.
2. Press and release the ARROW buttons to adjust values.
3. Press the ALERTS button to confirm and exit.
•When an alert value is reached, the station will beep 5 times every minute,
until the value is out of the alert range.
•Press any button to stop the alert from sounding.
•The flashing Alert Icon will indicate if it is a LO or HI alert.
Press the ALERTS button to toggle between alerts:
Outdoor HI / Outdoor LOW / Indoor HI / Indoor LOW
• Press and release the UP ARROW button to arm the alert.
Alert Icon will show.
• Press and releaase the DOWN ARROW button to disarm the alert.
Arm/Disarm Alerts

6
The station automatically resets minimum and maximum values daily at
midnight (12:00 AM).
• Press and release the DOWN ARROW button to view minimum values.
•Hold the DOWN ARROW button to reset minimum values.
•Press and release the UP ARROW button to view maximum values.
•Hold the UP ARROW button to reset maximum values.
MIN/MAX Records
Heat Index & Dew Point
•Press and release the HEAT/DEW button once to view Heat Index.
•Press and release the HEAT/DEW button again to view Dew Point.
Trend Arrows
•The UP and DOWN arrows indicate changes in temperature and humidity
over the past 3 hours. The STEADY arrow indicates no change in the past
3 hours.
•The arrows will update every 30 minutes and compare data from exactly 3
hours prior.
Temperature: Arrow will change with every 2 degrees Fahrenheit.
Humidity: Arrow will change with every 3% RH
Low Battery Indicator
Low Battery by the Indoor Temperature, replace batteries in the station.
Low Battery by the Outdoor Temperature, replace sensor batteries.

7
•The Sensor Weather Shield is designed to protect your outdoor sensor from
rain and snow.
•This shield will oer limited protection from the sun’s heat.
•Optional purchase at: bit.ly/925-1418
Sensor Search
•If you are seeing dashes in place of outdoor temperature, first check your sensor batteries.
•Hold the HEAT/DEW button for to search for the sensor. The Reception Icon will flash
while searching and be solid when sensor signal is received.
If your outdoor readings continue to show dashes, complete a full restart:
1. Bring your sensor inside next to your station.
2. Remove the batteries and power cord from the station and sensor.
3. Press any button on the display at least 20 times, and wait 15 minutes with the
power o.
4. After 15 minutes, install new batteries into your sensor, and then power back up the station
with the power cord and batteries.
5. Wait another 15 minutes to establish a strong connection. Place the sensor outside in a
shaded location.
Sensor Shield (not included)
Care & Maintenance
Battery Replacement Instructions
When batteries of dierent brand or type are used together, or new and old batteries are used together, some batteries may
be over-discharged due to a dierence of voltage or capacity. This can result in venting, leakage, and rupture and may cause
personal injury.
•Do not mix Alkaline, Lithium, Standard, or Rechargeable battteries.
• Always purchase the correct size and grade of battery most suitable for the intended use.
•Always replace the whole set of batteries at one time, taking care not to mix old and new ones, or batteries of dierent
types.
•Clean the battery contacts and also those of the device prior to battery installation.
•Ensure the batteries are installed correctly with regard to polarity (+ and -).
•Remove batteries from product during periods of non-use. Battery leakage can cause corrosion and damage to this product.
•Remove used batteries promptly.
•For recycling and disposal of batteries, and to protect the environment, please check the internet or your local phone
directory for local recycling centers and/or follow local government regulations.

8
308-1414Bv3 / 308-1414Wv3
Temperature Range: 32°F to 122°F (0°C to 50°C)
Power: 5-volt power adapter included GPU280500150WA00
Optional: 3-AAA batteries (not included)
The plug on the power adapter is intended to serve as the disconnect device, the socket-outlet shall be
installed near the equipment and shall be easily accessible.
Battery Life: Over 36 months
Dimensions: 8.36” L x 2.24” W x 5.49” H (21.22cm L x 5.68cm W x 13.94cm H)
Specifications
Outdoor Sensor (TX141TH-Bv4)
Temperature Range: -40°F to 140°F (-40°C to 60°C)
Humidity Range: 10% - 99% RH
Transmission Range: Over 330 feet
(100 meters) in open air RF 433MHz
Update Interval: About every 51 seconds
Power: 2-AA, LR6 batteries (not included)
Battery Life: Over 24 months
Dimensions: 1.58” L x 0.83” W x 5.08” H
(3.99cm L x 2.1cm W x 12.99 H cm)
8

9
Designed in La Crosse, Wisconsin •Made in China •Printed in China •DC 040723
If you require additional assistance, get in touch with our
friendly customer support team based in La Crosse, WI.
Self Help:
bit.ly/308-1414bv3_support or bit.ly/308-1414wv3_support
Online: bit.ly/contact_techsupport
Phone: [phone]
Our knowledgable customer support team is available:
Mon-Fri 8am-6pm CST
We’re Here to Help
Scan for
308-1414Bv3
La Crosse Technology, Ltd. provides a 1-year limited time warranty (from date of purchase) on
this product relating to manufacturing defects in materials & workmanship.
La Crosse Technology, Ltd, 2830 S. 26th St., La Crosse, WI 54601
For Full Warranty Details, Visit: www.lacrossetechnology.com/support
Patents: www.lacrossetechnology.com/patents
Ask questions, watch setup videos, and provide feedback on our social media outlets.
Follow La Crosse Technology on YouTube, Twitter, Facebook and Instgram.
Stay in Touch!
Warranty & Patent Info
California Residents
CA WARNING: This product can expose you to chemicals including acrylonitrile, butadiene, and styrene, which are
known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go
to: www.P65Warnings.ca.gov
Scan for
308-1414Wv3

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
Caution!
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority
to operate the equipment.
All rights reserved. This manual may not be reproduced in any form, even in part, or duplicated or processed using electronic,
mechanical or chemical process without the written permission of the publisher. This booklet may contain errors or misprints.
The information it contains is regularly checked and corrections are included in subsequent editions. We disclaim any
responsibility for any technical error or printing error, or their consequences. All trademarks and patents are recognized.
FCC Statement
DOUBLE YOUR WARRANTY
Scan the QR Code or visit:
bit.ly/308-1414bv3_register or
bit.ly/308-1414wv3_register
to register your product and double the
standard 1-year warranty for free by opting
to recieve occasional product emails. Scan for
308-1414Bv3
Scan for
308-1414Wv3