La Crosse Technology Wireless Weather Station User manual

1
Contents
Language Page
_________________________________________________________________________________
English 1
French 56
Spanish

2
TABLE OF CONTENTS
Topic Page
Inventory of Contents 4
Features 5
Setting Up 8
Battery Installation 12
Function keys 15
LCD Screen and Settings 17
Atomic time - WWVB Radio Controlled Time 20
Manual Settings 21
Weather Forecast and Tendency 31
Display of Indoor Temperature and Humidity Reading 37
Display of Outdoor Temperature and Humidity Reading 38

3
Display of Indoor Minimum and Maximum records 39
Display of Outdoor Minimum and Maximum records 40
Daily Min and Max outdoor temperature display 43
915 MHz Reception 44
Mounting 45
Care and maintenance 50
Specifications 51
Warranty 53

4
This product offers: INSTANT TRANSMISSION is the state-of-the-art
new wireless transmission technology, exclusively
designed and developed by LA CROSSE
TECHNOLOGY. INSTANT TRANSMISSION offers
you an immediate update (every 4 seconds!) of all
your outdoor data measured from the sensors:
follow your climatic variations in real-time!

5
INVENTORY OF CONTENTS
1. Wireless Weather Station
2. Wireless Thermo-hygro Sensor (TX29UTH-IT) and mounting bracket.
3. Instruction Manual and Warranty Card.
4. 4 Fresh “AA” IEC LR6, 1.5V Alkaline Batteries.

6
LCD
Display
FEATURES:
The Weather Station
Foldout
Stand
Battery
compartment
cover
Function
Keys
Hanging hole

7
•Atomic auto-set time (WWVB Radio controlled time) or manual time setting options
•Atomic auto-set time reception ON/OFF setting
•12/24 hour display
•Daylight time saving ON/OFF
•Hour, minute and second display
•Time zone option ±12 hours
•Wireless transmission at 915 MHz
•Signal reception intervals at 4-second
•Display indoor and outdoor temperature in (°F) or (°C) and indoor and outdoor humidity
(% RH)
Weather forecasting with 15 easy-to-read weather forecast signs featuring Oscar Outlook
Forecaster
•Weather forecasting icon sensitivity setting
•Temperature display in degrees Fahrenheit (°F) or Celsius (°C) selectable

8
•Indoor and Outdoor temperature and humidity display with MIN/MAX recording
•All MIN/MAX outdoor recordings show date and time received and all MIN/MAX recordings
can be reset
•Daily Outdoor minimum and maximum temperature display
•Can receive up to three sensors
•LCD contrast setting
•Low battery indicator
•Table standing/ Wall mounting

9
The Outdoor Thermo-hygro Sensor
•Remote transmission of outdoor temperature and humidity to
Weather Station by 915 MHz
•Shower proof casing
•Wall mounting case
•Mounting at a sheltered place. Avoid direct rain and sunshine

10
SETTING UP:
When one sensor is to be used
1. First, insert the batteries into the thermo-hygro sensor. (see “Install and replace
batteries in the thermo-hygro sensor “).
2. Immediately after and within 30 seconds, insert the batteries into Weather Station (see
“Install and replace batteries in the Weather Station”). Once the batteries are in place,
all segments of the LCD will light up briefly. Following the time as 12:00 and the "Oscar
Outlook" icon will be displayed. If these are not displayed after 60 seconds, remove the
batteries and wait for at least 10 seconds before reinserting them.
3. After inserting the batteries into the sensor, the Weather Station will start receiving data
from the sensor. The outdoor temperature and humidity and the signal reception icon
should then be displayed on the Weather Station. If this does not happen after 3 minutes,
the batteries will need to be removed from both units and reset from step 1.