La Crosse Technology WS6835 User manual

Page | 1
Model: WS6835
Quick Setup Guide
WIRELESS COLOR FORECAST STATION
Time
Calendar +
Alarm
Color
Animated
Forecast +
Tendency
Outdoor
Humidity
with Trend
Indoor
Temperature
with Trend
Indoor/Outdoor
Temperature
Alerts + Indoor
Humidity with
Trend
OUTDOOR SENSOR
TX141TH-BV2
Outdoor
Temperature
with Trend
Sensor
Battery
Cover
Sensor Battery
Compartment
2 “AA”
Battery
Compartment
3 “AAA”
AC Power
Jack
DC 5.0V
HX0180500150D2E
Base
Stand
24 Hour
Pressure
History
Graph with
Trend
FRONT
VIEW
SIDE BUTTONS
Moon Phase
LED
TX
BACK
VIEW
FRONT BUTTONS
Wall
Hanging
Holes

Page | 2
Get Started
Step 1: Insert the 5 volt AC cord (included) into the wall outlet then into
the forecast station.
Step 2: Insert the 3 new AAAAlkaline batteries (not included) into the
forecast station. Observe the correct polarity.
Step 3: Insert the 2 new AA batteries (not included) into the
TX141TH-BV2 outdoor sensor. Observe the correct polarity. The red LED
will flash during transmission.
Restart: If there is no outdoor temperature/humidity data after 3 minutes, unplug
the AC adapter and remove batteries from the forecast station & outdoor sensor
for 15 minutes. Return to Step 1 above.
Set Time, Date, Temperature Unit
1. Hold the TIME SET button to enter time set mode.
2. Press the ▼ or ▲ buttons to adjust the values.
3. Press the TIME SET button to confirm adjustments and move to the
next item.
4. The default week language is French.
Time setting order:
1. Beep on/off
2. Time Zone +/-12 H
3. 12/24 hour time format
4. Hour
5. Minutes
6. Year
7. Month
8. Date
9. Celsius/Fahrenheit
10. Language(FRE,GER, ITA, DUT, SPA, DAN, ENG)
Press the SNOOZE/LIGHT(HI-LOW-OFF) button to exit, or wait 20
seconds without pressing buttons to return to the normal time display.
When in setting mode of any feature, all the rest of the information of
the LCD should disappear, only concentrate in the setting of the
feature.
Set Indoor and Outdoor Temperature Alerts
1. Hold the ALERTES button until the station beeps.
2. The temperature alert value will blink in set mode.
3. Press the ▼ or ▲ buttons to adjust the values.

Page | 3
4. Press the ALERTES button to confirm & move to the next alert.
The temperature alert order:
1. Outdoor High (HA), 2. Outdoor Low (BA), 3. Indoor High (HA), 4.
Indoor Low (BA)
Arms/Disarms Temperature Alerts
Press and release the ALERTES button to toggle between
the alerts Outdoor HI (HA)/Outdoor LOW (BA)/Indoor HI
(HA)/Indoor LOW (BA).
Press the ▲ button to arm the alert.
Press the ▼ button to disarm the alert.
ALERT BELL ICON appears when armed.
Active Temperature Alert
Beeps once per minute with flashing alert bell icon.
Press any button to stop the alert.
Set Time Alarm
1. Hold the ALARME button to enter alarm time set mode.
2. Press the ▼ or ▲ buttons to adjust the values.
3. Press the ALARME button to confirm & move to the next
item.
Alarm Time setting order: 1. Hours, 2. Minutes
Activate/Deactivate Time Alarm
Press the ALARME button once to view alarm time.
Press the ALARME button again to activate the alarm.
Once activated, the bell icon appears.
Press the ALARME button again to deactivate the alarm.
The bell icon will disappear.
Snooze (Silences Alarm Temporarily)
When alarm sounds, press the SNOOZE/LIGHT button to
silence the alarm for 10 minutes. The alarm icon (Zz) will
flash.
To stop alarm for one day, press any button but not
HI/LOW/OFF button, while in snooze mode. The alarm icon
will show solid.

Page | 4
Note: The alarm is crescendo sound. The alarm sounds for 2 minutes
and then shut off completely.
Animated Color Forecast Icons
Animated forecast icons use changing atmospheric pressure to predict
weather conditions for the next 12-hours with 70-75% accuracy.
INTELLIGENT WEATHER FORECAST
This station learns; please allow 3 to 4 weeks for barometric calibration.
This will ensure an accurate personal forecast for your location.
Forecast Tendency Indicators (above Pressure History Graph)
Rising Pressure
Weather is Expected
to Improve
Steady Pressure
Weather is Expected
to Stay the Same
Falling Pressure
Weather is Expected
to Worsen
24 Hour Pressure History Graph/Tendency Arrow
The bar chart indicates the air pressure history
trend over the last 24 hours.
The columns represent the pressure change
(”InHg” or “hPa”) readings at specific times.
The “0” is equal to the current pressure and each
bar represents how past pressure was
compared to the current pressure.
Read the graph from left to right. If the bars are rising, it means that
the weather is getting better due to the increase of air pressure.
If the bars go down, it means the air pressure has dropped and the
weather is expected to get worse from the present time.

Page | 5
Heat Index/Dew Point
Press the HEAT/DEW button once to show the Heat Index
(Indice de chaleur).
Press the HEAT/DEW button twice to show the Dew Point
(Point de rosée).
If user doesn’t press this button, the unit will return to normal display
after 10 second.
Press and hold for 2 second to search for outdoor
temperature/humidity signal.
Moon Phase
Moon phase is based on lunar calendar, and moon phase chart will
display as:
Adjust Backlight
When using AC power:
Press the HI-LOW-OFF button to adjust the backlight.
When using Battery power only:
Press the HI-LOW-OFF button for 10 second backlight.
View/Reset MIN/MAX Values
The station automatically resets minimum and maximum values daily at
midnight (00:00).
Press the ▼ button to view minimum values.
Hold the ▼ button to manually reset minimum values.
Press the ▲ button to view maximum values.
Hold the ▲ button to manually reset maximum values.
Outdoor Temperature/Humidity Trend Indicators
The temperature (1°C/2°F) and humidity (3% RH) trend indicators update
every 30 minutes or less.

Page | 6
Temperature has risen in the past 3 hours.
Humidity has risen in the past 3 hours.
Temperature has not changed in the past 3 hours.
Humidity has not changed in the past 3 hours.
Temperature has fallen in the past 3 hours.
Humidity has fallen in the past 3 hours.
Search for Outdoor Sensor
Hold the HEAT/DEW button to search for the outdoor sensor.
The strength signal icon will animate until the sensor signal is
received or for 3 minutes if no signal available.
NOTE: IF the signal is lost, the station will display the LAST DATA
recorded for minutes, after that 10 mn if the signal does not come back
then display dashes "--". After 30 minutes, start looking for the outdoor
signal automatically.
Manual RCC Atomic Time Signal Search
Press the TIME SET button to start or stop a manual
signal search. The DCF Icon flashes during signal
search.
Low Battery Icon
Low battery icon indicates low battery for station or sensor.
If the icon is displayed in the Outdoor Humidity section,
replace batteries in the outdoor sensor.
If the icon is displayed in the Indoor Temperature section,
replace batteries in the forecast station.
Outdoor Sensor Positioning
Mount the Outdoor Sensor on a north-facing wall or in any well
shaded area. Under an eave or deck rail is preferred.
The maximum wireless transmission range to the forecast station is
over 90 meters (300 feet) in open air, not including walls or floors.
Be sure the outdoor sensor is mounted vertically.
DCF
Atomic
Icon
Low
Battery
Icon

Page | 7
Forecast Station Care & Maintenance
Do not mix old and new batteries
Do not mix Alkaline, Standard, Lithium or Rechargeable
Batteries
Always purchase the correct size and grade of battery most suitable
for the intended use.
Replace all batteries of a set at the same time.
Clean the battery contacts and also those of the device prior to
battery installation.
Ensure the batteries are installed correctly with regard to polarity
(+and -).
Remove batteries from equipment with is not to be used for an
extended period of time.
Remove used batteries promptly.
Do not expose to extreme temperature, vibration or shock.
Clean with a soft damp cloth. Do not use solvents or scouring
agents.
The product is not a toy. Keep it out of reach of children.
The product is not to be used for medical purpose or for public
information. It is intended for home use only.
The specs of this product may change without prior notice.
Improper use or unauthorized opening of housing voids warranty.
If the product is not working properly, change the batteries and/or
check the AC cord connection.
Specifications
Indoor
Temperature Range:
0°C to 50°C (+32°F to +122°F)
Humidity Range:
1%-99% (RH)
Outdoor
Temperature Range:
-40°C to 60°C(-40°F to 140°F )
Alkaline Batteries:
-29°C to 60°C (-20°F to 140°F)
Lithium Batteries:
-40°C to -29°C(-40°F to -20°F )
NOTE:
Temperatures below-29°C (-
20°F) require Lithium batteries in
the outdoor sensor
Humidity Range:
1%-99% (RH)
Distance:
Over 90 meters (300 ft.)
RF 433MHz (open air)
Power
Forecast Station

Page | 8
PrimaryAC Power:
AC#: HX0180500150D2E
5-volt AC power adapter
(included)
Optional/Battery Backup
Optional 3-AAA, IEC, LR3
batteries (not included)
TX141TH-BV2 Outdoor Sensor:
2-AA, IEC, LR6 batteries (not
included)
Battery Life
Forecast Station
Battery Backup:
Battery life is over 24 months when
using the AC adapter for primary
power
TX141TH-BV2 Outdoor Sensor:
Battery life is over 12 months when
using reputable battery brands for
both Alkaline and Lithium batteries
Dimensions
Forecast Station:
156.5 W x 245.1 H x 23.5 D mm
(6.16” W x 9.65” H x 0.925” D )
TX141TH-BV2 Outdoor Sensor:
40 L x 20 W x 130 H mm
(1.57"L x 0.79"W x 5.12"H )
LIABILITY DISCLAIMER
The electrical and electronic wastes contain hazardous substances.
Disposal of electronic waste in wild country and/or in unauthorized
grounds strongly damages the environment.
Please contact your local or/and regional authorities to retrieve the
addresses of legal dumping grounds with selective collection.
All electronic instruments must from now on be recycled. User shall
take an active part in the reuse, recycling and recovery of the electrical
and electronic waste.
The unrestricted disposal of electronic waste may do harm on public
health and the quality of environment.
As stated on the gift box and labeled on the product, reading the “User
manual” is highly recommended for the benefit of the user. This
product must however not be thrown in general rubbish collection
points.
The manufacturer and supplier cannot accept any responsibility for any
incorrect readings and any consequences that occur should an
inaccurate reading take place.
This product is designed for use in the home only as indication of the
temperature.
This product is not to be used for medical purposes or for public
information.

Page | 9
The specifications of this product may change without prior notice.
This product is not a toy. Keep out of the reach of children.
No part of this manual may be reproduced without written authorization
of the manufacturer.
R&TTE Directive 1999/5/EC
Summary of the Declaration of Conformity : We hereby declare that this wireless
transmission device does comply with the essential requirements of R&TTE Directive
1999/5/EC.