La Crosse Equity 30416 User manual

.9-inch LED Alarm Clock
with Dual Charging Ports
Model: 30416 & 30417
DC: 051518
POWER UP
1. Insert the 120 volt power cord into an outlet,
then into your clock.
Optional: Insert one 9 volt battery for backup.
2. 12:00 will flash as an indication to set the time
and/or alarm.
TIME SETTING
1. Continuously hold down the TIME button
while setting your hour and minutes.
2. While holding the TIME button, press the
HOUR button to set your hour.
Note: The PM indicator will appear when
you advance to PM time.
3. While holding the TIME button press the
MINUTE button to set your minutes.
4. Release the TIME button when the correct
time is shown on the display.
TIME ALARM
1. Continuously hold down the ALARM
button while setting your alarm time.
2. While holding the ALARM button, press
the HOUR button to set your alarm hour.
Note: The PM indicator will appear
when you advance to PM time.
3. While holding the ALARM button, press
the MINUTE button to set alarm minutes.
4. Release the ALARM button when the
correct alarm time is shown on the
display.
SNOOZE
• When alarm sounds, press the SNOOZE
button to silence alarm for 8 minutes.
• Snooze function can be repeated many
times if desired.
Page | 2 Page | 3
PM Light
Indicator
Alarm Light
Indicator
Time
Display
Hour MinuteAlarmTime Snooze
Alarm ON\OFF
Switch
PM
AL
DC5V 1 A DC5V 2 A
TIME
HOU R
M
IN
ALARM
DIMMER
HILO
A
LARM
OFF
ON
Dimmer HI \ LO
Switch
1 Amp. 2 Amp.
USB Cord not included
ALARM ON/OFF
• Slide the ON/OFF switch to the ON position
to activate the alarm
• Slide the ON/OFF switch to the OFF position
to deactivate the alarm
USB CHARGING PORT
• Connect your external device’s USB charging cable
(not included) to the USB charging port.
• USB Power Output: 5V 1A or 2A maximum current.
• Charge devices that are self-regulating.

This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Increase separation between equipment & receiver.
• Consult the dealer or an experienced radio/TV technician for help.
This device must not be co-located or operating in conjunction with
any other antenna or transmitter.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including
interference that may cause undesired operation.
Caution!
The manufacturer is not responsible for any radio or TV interference
caused by unauthorized changes or modifications to this equipment.
Such changes or modifications could void the user authority to
operate the equipment.
All rights reserved. This manual may not be reproduced in any
form, even in part, or duplicated or processed using electronic,
mechanical or chemical process without the written permission of
the publisher.
This booklet may contain errors or misprints. The information it
contains is regularly checked and corrections are included in
subsequent editions. We disclaim any responsibility for any technical
error or printing error, or their consequences. All trademarks and
patents are recognized.
FCC STATEMENT
Equity provides a 2-year limited warranty on this product from
the date of consumer purchase against defects for material and
workmanship. During this period such defects will be repaired, or
the product will be replaced at Equity’s option, without charge. This
warranty does not cover damage caused by misuse or negligence.
ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO
IMPLIED WARRANTIES OR FITNESS AND MERCHANTABILITY, ARE
LIMITED IN DURATION TO A PERIOD ENDING TWO YEARS FROM
DATE OF PURCHASE.
Some states do not allow limitations on how long an implied
warranty lasts so the above limitation may not apply to you. This
warranty gives you specific legal rights and you may also have other
rights which vary from State to State.
If your product is not working properly, please send:
Your product. A letter explaining the problem and $5.00 for postage
and handling to:
Equity by La Crosse
Warranty Department
2830 26th St S.
La Crosse, WI 54601
www.lacrossetechnology.com/support
WARRANTY AND SUPPORT
• Always purchase the correct size and grade of battery most suitable
for intended use.
• Clean the battery contacts and also those of your clock prior to battery
installation.
• Ensure the battery is installed with correct polarity (+ and -).
• Remove battery from equipment when it is not used for an extended
period of time.
• Promptly remove an expired battery.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRICAL SHOCK, DO
NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
Caution: To prevent electrical shock do not use this (polarized) plug with an
extension cord, receptacle, or other outlet unless the blades can be fully
inserted to prevent blade exposure.
CARE & MAINTENANCE
BATTERY BACKUP
Power: 120V power cord
Requires one 9V battery for back-up not included
POWER REQUIREMENTS
Page | 5 Page | 6
Page | 4
• Insert one “9V” battery into the battery compartment on the
bottom of the clock. The battery will keep the alarm and time
settings until the power is restored.
• The LED display will not light-up but the alarm will sound at the
preset alarm time.
• If there is no battery installed but the power is interrupted, the
display will flash at 12:00 and the time and alarm need to be set
again.
Made in China Printed in China
CLOCK DIMMER SWITCH
• Brighter: Slide the HI/LO display dimmer switch to HI position.
• Normal: Slide the HI/LO display dimmer switch to LO position.
WARNING: This product can expose you to chemicals including
styrene, which is known in the State of California to cause
cancer. For more information go to: www.P65Warnings.ca.gov